Innokin Trine Quick Guide
TRINE
Contact & Support
For any questions, contact: support@innokin.com
[Facebook]: facebook.com/Innokin.Technology | [Instagram]: instagram.com/innokintechnology | [Twitter]: twitter.com/innokintech | [Reddit]: reddit.com/r/innokin
Manufacturer Information
Manufacturer: Shenzhen Vapewell Technology Co., Ltd.
Address: 3rd Floor, Building 10, Xinxintian Industrial Park, Xinsha Road, Shaer Community, Shajing, Baoan District, 518104, Shenzhen, China.
Telephone: +86 755 2768 5365
Production License: 5144030172
Certifications: ISO 9001 and ISO 14001 Certified.
Made In: CHINA
European Representative
Company: FRANCE VAPOTAGE DISTRIBUTION
Address: 57 impasse de la Ferme Cardon, Rue de la Croix Bougard 59810 LESQUIN France
Telephone: +33 320020152
Email: guillaume.vilain@innokin.fr
Safety Guidelines and Warnings
Please read this section carefully to ensure you receive maximum benefits from the product and enjoy vaping with it in the most safe and effective ways possible.
- This product is intended for use by adults of legal smoking age (18+ or higher). This product is not recommended for non-smokers, young people under the age of 18 years, pregnant or breast feeding women and those experiencing general ill health.
- This product may be used with e-liquids that contain nicotine. If you are using e-liquid containing nicotine, please refer to the information provided in the section "Important Information About Using Nicotine Containing E-Liquids" or check with your e-liquid provider for more information.
- This product is only designed to be used with high quality e-liquid. It is not intended for use with loose tobacco leaf or herbal substances. INNOKIN is not responsible for any atomizer or battery damage due to the use of low quality e-liquid, dry herb, or other materials for which this product was not designed.
- This product is not intended to treat, mitigate, prevent or cure any disease or condition. It is not intended for use as a smoking cessation device.
- Always keep this product out of reach of children and pets.
- Do not misuse, mishandle or store this product improperly. In order to prolong the operation of this product, please do not use, place or store it in excessively hot or cold environments.
- Do not attempt to repair the product by yourself as damage or personal injury may occur.
- This product is not waterproof. Keep it dry at all times.
- Do not allow any liquids or e-juice to enter the device through the top threading or the USB ports. If any liquids enter the device, or come into contact with the PCB, please discontinue using or charging the device and contact your local authorized INNOKIN vendor immediately.
- INNOKIN is not responsible for battery and charger explosions, or malfunctions, due to the use of a low-quality charger. Only use the original micro USB cable to charge the device. We recommend that you use a high quality USB wall charger (CE/UL certified).
- This product is not designed for use with a car charger. This product does not come included with a car charger.
- Obey local laws or regulations regarding electronic cigarettes when vaping. If you are in an area where there are any bans or potential dangers, please do not use this product.
Important Information About Using Nicotine-Containing E-Liquids
Before using nicotine-containing e-liquids, the user should read the following information carefully.
DO NOT USE NICOTINE-CONTAINING E-LIQUIDS:
- If you are allergic to nicotine or any of the other ingredients contained in the e-liquid (see manufacturer's label for full details).
WARNINGS AND PRECAUTIONS
Nicotine-containing e-liquids are not recommended for:
- Those experiencing general ill health; such as heart disease, stomach and duodenal ulcers, liver or kidney problems, long term throat disease or difficulty breathing due to bronchitis, emphysema or asthma.
- Those who have an overactive thyroid gland or have a phaeochromocytoma (a tumour of the adrenal gland that can affect high blood pressure).
- Those who have diabetes, as nicotine may affect your blood sugar levels.
- Those taking the following medication: Theophylline (to treat breathing problems), Ropinirole (to treat restless legs), Clozapone (to treat schizophrenia).
IF YOU INHALE TOO MUCH NICOTINE OR USE THE PRODUCT TOO MUCH YOU MAY EXPERIENCE ONE OR MORE OF THE FOLLOWING EFFECTS:
- Feeling faint
- Headache
- Nasal congestion
- Chest palpitations
- Nausea (feeling sick)
- Coughing
- Dizziness
- Hiccups
- Irritation in the mouth or throat
- Stomach discomfort
- Vomiting (being sick)
- Abnormal heart rate
If you experience any of the above side effects, including any possible side effects not listed in this user manual, discontinue using the product. If the effect(s) continue after you stop use, consult your doctor or healthcare professional and bring this leaflet to their attention.
ADDICTIVENESS
Nicotine is highly addictive; and is therefore intended for adult smokers only.
Storage and Disposal
HOW TO STORE AN ELECTRONIC CIGARETTE
Always power off the electronic cigarette when it is not being used, or when it is going to be stored. Store the electronic cigarette in room temperature (5°C to 30°C) in a clean dry place. Keep the product out of sight and reach of children and animals.
HOW TO DISPOSE OF AN ELECTRONIC CIGARETTE
The electronic cigarette contains a rechargeable battery which should be recycled in a designated waste disposal site. Please dispose of your electronic cigarette responsibly with consideration to the environment.
Battery Care Guide
INTERNAL BATTERY
- Do not leave device unattended while charging.
- Keep a charge of more than 10% to maximize battery lifespan.
- Only charge with a high quality Wall Adapter and stable power source with included micro-USB cable.
- Do not use with a car charger.
- Do not leave device charging for extended periods of time. Stop charging when the battery is full.
- "Vape-while-charging" must be used with +10% battery charge.
- Carefully insert the micro-USB plug correctly. Do not use force or the port may be damaged.
- Check with your airline before flying with your vaporizer.
REPLACEABLE BATTERY
- Buy only high quality batteries from a trusted source.
- Only use a high quality Battery Charger.
- Do not leave batteries unattended while charging. Remove battery when fully charged.
- Always store batteries safely in a silicone sleeve when not in use.
- Do not remove the battery wrap. If the battery wrap is damaged, replace battery immediately.
- If the wrap is discolored, replace battery.
- Do not use damaged batteries.
- Batteries must always be stored in a protective sleeve or case when placed in a pocket or bag.
Device Components
- POD Atomizer: Houses the coil and e-liquid.
- Mouthpiece: The part used for drawing vapor.
- E-liquid Filling Port: Located under the mouthpiece for refilling e-liquid.
- Airflow Control Button: Allows adjustment of the draw resistance.
- Power Button: Used for turning the device on/off and adjusting settings.
- USB-C Charging Port: For charging the device's battery.
- Battery: The power source for the device.
Device Operation
How to Fill and Install the Pod
- Remove the black mouthpiece to reveal the top-fill section and add e-liquid.
- Insert the magnetic pod into the device.
Important Notes:
- Wait for at least five minutes after filling to allow the new pod to saturate with E-liquid.
- Keep the pod from going completely empty of E-liquid. Refill it regularly to avoid dry hits or coil damage.
Home Screen Display
The device screen displays key information:
- Battery Level: Indicates the remaining battery charge. Visual representation: Less than 10% (< 10%), 10% to 30% (10%~30%), Greater than 30% (> 30%).
- Wattage: Displays the current power output in Watts (W).
- Puff Time: Shows the duration of your current draw in seconds while vaping.
- Output Voltage: Displays the voltage being supplied to the coil.
Adjusting the Airflow
Adjust the airflow control for your desired draw.
Power On/Off the Device
Press the power button three times within two seconds.
Adjusting the Wattage
- Double-click the power button to enter adjustment mode. When the power value flashes, click the power button to select the upward wattage value; it will loop from maximum to minimum.
- Press and hold the button again to enter the quick adjustment mode.
- Wait for five seconds to exit the wattage setting.
Installing and Removing the Battery
To remove the battery, pinch the snap joint on both sides and pull the battery downward. If you need to replace the battery, simply push the new battery into the device.
Charging
- Charge promptly based on battery level. Do not allow the battery to stay under 10% or above 90% for extended periods.
- Use a standard output charger and charging cable with the correct charging current and voltage range.
- Charging pauses when vaping and resumes when the button is let go.
EcoDrain™ and Recycling
EcoDrain™ (Self-discharging Mode)
While the device is off, connecting it to a charger and pressing the power button 10 times quickly will activate the device's self-discharge mode. While in this mode, a recycling symbol will be shown on the display.
EEE Recycling
This product is meant to be disposed of in an approved e-waste receptacle or recycling bin. Do not throw it away in standard waste receptacles.
Specifications
Feature | Details |
---|---|
Dimensions | 110.93 × 25.86 × 15.57 mm |
Capacity | 2mL |
Pod Options | Coil 0.6Ω (20-22W) / 0.8Ω (12-14W) / 1.2Ω (11-14W) |
Output Power | 6.0-25.0W |
Built-in Battery Capacity | 1000mAh |
Charging Current | DC 5.0V/1.0A |
Activation | Draw-activated Vape / Button-activated Vape |
Battery Standard | GB31241 |
Limited Voltage | 4.35V |
Device Protections
- LOW VOLT / LOW BATTERY PROTECTION: If the battery voltage is too low before or during vaping, the screen will display "LOW VOLT" and the red light will flash 8 times.
- COIL CHECK / NO LOAD/HIGH RESISTANCE PROTECTION: When no-load resistance or high resistance is detected, the screen will display "COIL CHECK" and the green light will flash.
- LOW RES / SHORT CIRCUIT PROTECTION: If low resistance is detected before vaping, the screen will display "LOW RES" and stay on for 5 seconds. If low resistance is detected while vaping, the screen will display "COIL SHORT" and stay on for 5 seconds.
- TIME OUT / AUTO-SHUT OFF PROTECTION: If the power button is held for 10 seconds, the screen will display "TIME OUT" and flash 10 times.
- HIGH TEMP / OVERHEAT PROTECTION: When the PCBA (Printed Circuit Board Assembly) temperature sensor detects a high temperature, the screen will display "HIGH TEMP" and flash 3 times, then 3 times again.
Warranty Information
The product includes a Warranty Card for customer information. INNOKIN TECHNOLOGY provides a 90-day after-sales service warranty to all authorized vendors. Please consult the official Innokin website (www.innokin.com) or your Authorized Innokin Technology Vendor for more information and terms of service. Proof of purchase and the original box are needed for the 90-Day Limited Warranty.