Coospo BK467 User Manual

Standard Accessories

• Speed / Cadence Sensor x 1
• Rubber Mat (Flat x 1, Curved x 1)
• Band (Large x 2, Medium x 2, Small x 2)
• User Manual x 1

Product Introduction

The BK467 measures speed or cadence in real time and sends this data to your app or bike computer. This user manual will help you use the product effectively. Please keep it for future reference.

Remove the Insulation Sheet

Before use, please remove the insulation sheet from the battery compartment.

1. Twist the battery cover with a coin in the OPEN direction.
2. Open the battery cover and remove the battery.
3. Take out the insulating sheet.
4. Reinstall the battery and twist the battery cover in the CLOSE direction to secure it.

Function and Operation

The BK467 has two modes: speed mode and cadence mode. You can switch between modes by rebooting the device.

Mode Switching

After the battery is installed, an indicator light will turn on. A red light indicates speed mode, and a blue light indicates cadence mode.

Installation

Installation for Speed Mode

1. Buckle the curved rubber mat onto the back of the sensor.
2. Attach the sensor with the large rubber band onto the wheel axle.

Installation for Cadence Mode

1. Buckle the flat rubber mat onto the back of the sensor.
2. Attach the sensor with the small rubber band onto the pedal crank.

Specifications

Compatible Apps

CoospoRide, Wahoo, Openrider, Zwift, MAP MY RIDE+, or other apps with speed/cadence features.

Applicable Smart Phones

• iOS 7.0 or above, iPhone 4s model or above
• Android 4.3 or above with Bluetooth 4.0

Disclaimer

The information in this manual is for reference only. The product described may be subject to change due to the manufacturer's ongoing research and development plans, without prior announcement. Coospo makes no statements or warranties about this manual.