COOSPO BK467 Speed and Cadence Sensor
Model: BK467-RTN-11-2150
Scan the QR code on the cover page to access the manual in multiple languages online.
Visit: https://manual-hub.com/
Standard Accessories
- Speed / Cadence Sensor x 1[Illustration of the speed/cadence sensor unit]
- Rubber Mat x 1 (Flat x 1, Curved x 1)[Illustration of two rubber mats, one flat and one curved]
- Band x 6 (Large x 2, Medium x 2, Small x 2)[Illustration of six rubber bands of different sizes]
- User Manual x 1[Illustration of a booklet]
Product Introduction
The COOSPO BK467 measures speed or cadence in real time and transmits this data to a compatible app or bike computer. This user manual provides guidance to help you use the product effectively. Please retain it for future reference.
Setup and Operation
Remove the Insulation Sheet
Before first use, remove the insulation sheet from the battery compartment.
- Twist the battery cover with a coin in the OPEN direction.[Diagram showing a coin being used to twist the battery cover to the 'OPEN' position.]
- Open the battery cover and remove the battery.[Diagram showing the battery cover open and the battery removed.]
- Take out the insulating sheet.[Diagram showing the insulating sheet being removed from the battery compartment.]
- Please remove the insulation sheet before use. ℹ️
Mode Switching
The BK467 supports both speed mode and cadence mode. You can switch modes by rebooting the device.
- To switch modes, twist the battery cover with a coin in the OPEN direction, open the battery cover, remove the battery, and then reinsert it.[Diagram showing a coin being used to twist the battery cover to the 'OPEN' position.]
- After reinserting the battery, twist the battery cover in the CLOSE direction to secure it.[Diagram showing the battery cover being closed and secured.]
- After the battery is installed, an indicator light will turn on.
- Red light indicates Speed Mode.
- Blue light indicates Cadence Mode.
Installation
Follow these steps to install the sensor:
Installation for Speed Mode
Attach the sensor to your bike's rear wheel axle.
- Buckle the curved rubber mat onto the back of the sensor.
- Bind the sensor with the large rubber band onto the wheel axle.
Installation for Cadence Mode
Attach the sensor to your bike's pedal crank.
- Buckle the flat rubber mat onto the back of the sensor.
- Bind the sensor with the small rubber band onto the pedal crank.
Specifications
| Feature | Details |
|---|---|
| Weight | 9.5 g |
| Battery Life | 300 hours |
| Battery Type | CR2032 220mAh |
| Waterproof | IP67 |
| Wireless | Bluetooth & ANT+ |
| Size | 41 x 34 x 10 mm |
| Max Speed | 120 km/h |
| Max Cadence | 300 rpm |
| Working Temperature | -10°C ~ 50°C |
| Color | Black |
Compatibility
Applicable Smart Phones
- iOS 7.0 or above, iPhone 4s model or above
- ? Android 4.3 or above with Bluetooth 4.0
Compatible Apps
CoospoRide, Wahoo, Openrider, Zwift, MAP MY RIDE+, or other Apps with speed/cadence feature.
Disclaimer and Compliance
Disclaimer
The information in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's ongoing research and development plans, without prior announcement.
COOSPO makes no statement or warranty regarding this manual.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and .
- This device must accept any interference received, including interference that may cause undesired operation.
Safety and Disposal
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information. ⚠️
- Do not open or modify the product. ⚠️
- Do not disassemble or attempt to service this product. ⚠️
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, call COOSPO support.
- Product must be returned to the manufacturer for any service or repair.
