Ikan PT4200 Professional 12" Beam Splitter Teleprompter Quick Start Guide

Model: PT4200

What's Included

1 x Teleprompter Base
1 x Bracket with Glass
1 x Magnetic Teleprompter Hood with Boot
1 x Monitor
1 x Dual Sided Riser
1 x AC Adapter with Cord
1 x PrompterPro Software
2 x 15mm Rod Monitor Adapters
2 x Hex Keys
4 x Screws

Setup Instructions

Step 1: Attach Monitor Adapters

Description of image: The back of a monitor is shown with VESA mounting points. Two 15mm rod monitor adapters are being attached using four screws and a smaller hex key.

Step 2: Loosen Rod Clamps

Description of image: Similar to Step 1, the back of the monitor with attached adapters is shown. A larger hex key is used to loosen the rod clamps on the adapters.

Step 3: Loosen Base Screws

Description of image: The teleprompter base is shown. Four screws on the top are being loosened to release the rods.

Step 4: Extend Rods

Description of image: The teleprompter base is shown. Two screws are loosened, and the rods are being pulled outwards to create space for the monitor. All six screws are then tightened.

Step 5: Mount Monitor

Description of image: The monitor, now with adapters attached, is being slid onto the extended rods of the teleprompter base. Slight clearance is left for the bracket and glass.

Step 6: Insert Bracket with Glass

Description of image: A hand is shown pulling a red knob on the teleprompter base. This action is to allow the teleprompter bracket with glass to be inserted into the base.

Step 7: Secure Bracket

Description of image: A silver knob on the teleprompter assembly is being tightened to secure the teleprompter bracket in place.

Step 8: Lock Monitor

Description of image: The monitor is shown fully slid into position on the rods. Four screws are being tightened to lock the monitor securely.

Step 9: Attach Hood

Description of image: The magnetic teleprompter hood with its boot is being attached to the teleprompter assembly.

Step 10: Install Riser

Description of image: A dual-sided riser is being slid into the directional channel of the teleprompter base. Instructions are given for camera size orientation (lower side for larger/taller cameras, higher side for smaller cameras).

Specifications

Aspect Ratio	4:3
Brightness	350 cd/m2
Build Material	Aluminum / Steel
Contrast Ratio	500:1
Input Signal	Composite BNC, VGA, HDMI
Reading Range	13 ft.
Resolution	1024 x 768
Screen Size	12 in.
Viewing Angle	160 degrees (horizontal/vertical)

Features

Includes 12” monitor that supports image flip (vertical and horizontal)
High-quality American made 70/30 beam splitter glass
Screen readable from up to 13'
Works with many different sized cameras
Easy balancing with adjustable base
Perfect size for portability and view-ability
Ships in Reusable Foam for Easy Transport
Includes MAC and PC Software
HDMI, VGA, and Composite BNC connectivity

Learn More

More dynamic information available at the official website: www.ikancorp.com

Support

Contact email: support@ikancorp.com

Conditions of Warranty Service

✔️ Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
✔️ The components and maintenance service fee will be charged if the warranty period is expired.

Free Service will not be Provided in the Following Situations:

(Even if the product is still within the warranty period.)

❌ Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
❌ Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.

	ikan PT-Elite-UL Universal Large Tablet Teleprompter Quickstart Guide This quickstart guide from ikan Corporation details the assembly and usage of the PT-Elite-UL Universal Large Tablet Teleprompter. Learn about included components, setup steps, and warranty conditions for professional teleprompting.
	Ikan PT4900S-PEDESTAL Quick Start Guide: 19" Teleprompter, Pedestal & Dolly System A comprehensive quick start guide for the Ikan PT4900S-PEDESTAL turnkey broadcast solution, detailing the assembly and features of the 19" SDI teleprompter, EP880S pedestal, and EI-7007 dolly. Includes specifications, monitor settings, and warranty information.
	Ikan Teleprompter Monitors: Quick Start Guide and Specifications This document provides a quick start guide and detailed specifications for Ikan's range of teleprompter monitors, including models PT3700-M, PT17-HB-V2, PT3100E-M, PT15-HB-V2, and PT1200-M. It covers monitor ports, menu settings, operational features, and technical data for each model.
	Ikan VXF7-HB Quick Start Guide: 7" 4K/3G-SDI Field Monitor A quick start guide for the Ikan VXF7-HB, a 7-inch High Bright 4K/3G-SDI On-Camera Tally Field Monitor. Includes setup, features, specifications, and warranty information.
	Ikan AX20-FK-V2 Atlas 21.5" Field and Studio 4K Monitor Quick Start Guide Quick start guide for the Ikan AX20-FK-V2 Atlas 21.5" Field and Studio 4K Monitor, detailing its features, specifications, and what's included.
	Ikan PT4900 Teleprompter, Pedestal & Dolly Turnkey System: Quick Start Guide & Specifications Comprehensive guide to the Ikan PT4900 19-inch teleprompter, pedestal, and dolly turnkey broadcast solution. Includes assembly instructions, component details, monitor settings, specifications, and optional accessories from Ikan and E-IMAGE.
	ikan PT-ELITE-V2-RC Quickstart Guide: Setup and Operation Comprehensive quick start guide for the ikan PT-ELITE-V2-RC Elite Universal Tablet & iPad Teleprompter, covering setup, included components, remote pairing, and troubleshooting.
	Ikan PT4500-TM-PEDESTAL Teleprompter System Quick Start Guide This guide provides instructions for setting up and using the Ikan PT4500-TM-PEDESTAL 15" Teleprompter, Pedestal & Dolly Turnkey with Talent Monitor. It includes assembly steps, monitor settings, specifications, and optional accessories.