UGREEN CM353 M.2 NVMe SSD Enclosure
User Manual
Customer Support
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
Email: www.alza.co.uk/kontakt
Phone: +44 (0)203 514 4411
Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
Product Overview
Diagram showing the UGREEN CM353 M.2 NVMe SSD Enclosure in an exploded view, with the internal circuit board separated from the outer casing. Numbered labels point to specific components.
- 1. USB-C male connector
- 2. Open button
- 3. USB-A male connector
- 4. Hard drive fixing hole
- 5. M.2 M-Key port
- 6. Operating LED indicator
Installation
Diagram showing the enclosure with both end covers being removed.
1. Remove both end covers.
Diagram showing the main circuit board being pulled out from the enclosure after pressing the open button.
2. Press the open button to pull out the main board.
Close-up diagram showing the pre-installed mounting screw being removed from the enclosure.
3. Remove the pre-installed mounting screw.
Diagram showing an M.2 SSD being placed and secured with the mounting screw inside the enclosure.
4. Secure the M.2 SSD with the mounting screw.
Diagram showing the M.2 SSD being inserted into the M.2 socket on the main board.
5. Insert M.2 hard drive into the M.2 socket.
Diagram showing the mounting screw being aligned with the fixing hole on the enclosure.
6. Align the mounting screw with the fixing hole.
Diagram showing the main circuit board being re-inserted into the enclosure.
7. Re-install the main board.
Diagram showing the UGREEN enclosure connected to a laptop (PC). The LED indicator on the enclosure is shown blinking white.
8. Connect the product to a device (like a computer). Once connected, the LED indicator blinks white.
Specifications
| Model | CM353 |
|---|---|
| Input | USB-C male, USB-A male |
| Output | M.2 M-Key |
| USB standard | USB 3.2 Gen2 (up to 10Gbps) |
| Supported drive types | M.2 NVMe SSD |
| Supported drive size | 2242/2280 |
| Case material | Aluminium alloy |
| Compatible systems | Windows/macOS/Linux |
| Dimension | L139 x W40 x H14.3 (mm) |
Notes
- Remember to backup any important data before using the product.
- The LED indicator will blink while operating; do not pull out the product in case of data loss.
- Do not insert or remove the product while switching the computer on or off to avoid damage to your hard drive caused by strong current.
- When the computer is not in use, do not leave the product plugged in for an extended period.
- To avoid data loss, activate the "Safely Remove" function before removing the drive.
- The operating voltage of the connected ports should be within the range of 5V±5%.
- Any data loss or data recovery services are not recoverable under UGREEN warranties.
Package Contents
- 1 x M.2 NVMe SSD Enclosure
- 1 x User Manual
- 1 x Mounting Screw
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly. You must provide the original proof of purchase with the date of purchase.
The following are considered a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended, or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, intervention by an unauthorized person, or mechanical damage due to the buyer's fault (e.g., during transport, cleaning with inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, alterations to the design, or adaptations to change or extend the functions of the product compared to the purchased design, or used non-original components.
EU Declaration of Conformity
This product complies with the legal requirements of the following European Union directives: 2014/30/EU and 2011/65/EU including amendments 2015/863/EU.
CE
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
Symbol indicating WEEE disposal: A crossed-out wheeled bin.
