UGREEN CM298 M.2 SATA SSD Enclosure

Introduction

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Contact: www.alza.co.uk/kontakt

Phone: +44 (0)203 514 4411

Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Product Details

The enclosure features the following components:

• 1. USB-C M connector
• 2. USB-A M connector
• 3. "Open" Button
• 4. LED Indicator Light

How It Works: The enclosure can be connected to a PC, MacBook, or Mobile device using its USB-C port.

How To Install

1. Pull off the lids of both ends.
2. Pull off the rear panel by pressing the "Open" button.
3. Insert the SSD into the M.2 port of the unit, aligning the notch position, and push it in.
4. Fix the SSD with the provided fastener.
5. Install the rear panel.
6. Connect the unit to your computer / phone.

Specifications

Notes

• This unit complies with M.2SATA/M2 NGFF hard drive, DO NOT support M.2 NVME hard drive and the hard drive that supports PCI-E protocol.
• The USB 3.1 input port supports transfer rates up to 10Gbps, but due to the limitation of the SATA protocol, the transfer rates of output port only can be up to 6Gbps Max.
• Please do the "Safety Remove Hardware" on your computer firstly, then disconnect the enclosure and computer, and take out your hard drive.
• The new hard disk needs to be formatted and partitioned for the first time. Please backup hard disk data in advance before hard disk partition on formatting.
• In the capacity of your hard disk is larger than 2TB, please use a 64-bit operating system and partition it into GPT format. XP system does not support the capacity of the hard disk is larger than 2TB.
• Works with USB 5V±5% power supply and exceeding the standard voltage range may cause damage to the product or cause potential safety problems.
• The product is suitable for moderate climates only. And DO NOT use this unit in moist environment.
• DO NOT drop, squeeze, impact or throw.

Package Contents

• 1 x M.2 (B-Key) Hard Driver Enclosure
• 1 x User Manual
• 2 x Fixed Fasteners

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This product complies with the legal requirements of the following European Union directives: 2014/30/EU and 2011/65/EU including amendments 2015/863/EU.

CE

WEEE: This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

[crossed-out wheeled bin symbol]