Samsung WF42H5000AW Front-Load Washer
Installation Options and Dimensions
Installing Options
- Stacked: One unit placed directly on top of another.
- Side by Side: Two units placed next to each other.
- On Pedestals: Units placed on raised bases.
- Stacked Depth: Illustrates stacked units considering depth requirements.
Installing Your Washer: Alcove or Closet Installation
A. Recessed Area
Diagram shows two washers side-by-side in a recessed area. Clearances: 1 inch on each outer side of the pair, with 27 inches width allocated for each washer. The recess itself is shown with 1 inch clearance on each side of the pair of washers.
B. Side View - Closet or Confined Area
Diagram shows a side view of a washer within a closet or confined space. Minimum clearances are specified:
- Sides: 1 inch
- Rear: 5 7/8 inches
- Top: 17 inches
- Closet Front: 2 inches
Important Note: If the washer and dryer are installed together, the closet front must have at least a 72-inch unobstructed air opening. Your washer alone does not require a specific air opening.
Dimensions
Dimensions are provided for installations with an optional pedestal base or stacking kit.
Single Washer with Pedestal
Diagram shows a single washer with a pedestal. Height: 38 11/16 inches. Width: 27 inches. Depth: 33 inches. Clearance required to clear an open door: 5 3/16 inches.
Typical Opening Dimensions for Closet or Door
Diagram shows typical dimensions for a closet or door opening. Height: 48 inches. Width: 24 inches. Depth: 5 inches.
Required Dimensions for Installation with Stacking Kit
Diagram shows a stacked washer and dryer configuration. Total Height: 77 1/2 inches. Width: 27 inches. Depth: 33 inches. Clearances: 6 inches on each outer side, 3 inches on the front, 5 7/8 inches on the rear, and 1 inch on the outer sides.
*Required Spacing.
**External exhaust elbow requires additional space.