Samsung 28 cu. ft. Side-by-Side Refrigerator
MODEL RS28CB7600 DIMENSIONS
Be sure your new fridge will fit
Don't wait until delivery to be sure your new refrigerator will fit – both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with confidence.
Width (fits 36" opening): 35 7/8"
Depth without door: 28 7/8"
Depth with recessed handle: 33 3/4"
Height with hinge: 70 5/8"
Standard-Depth Refrigerator
Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry.
Top of refrigerator with doors open 90°:
Depth with door open 90°: 51 3/8"
Top of refrigerator with doors open 165° (Freezer Door) / 170° (Refrigerator Door):
Overall width with doors open: 50"
Installation clearances
- Allow 3.75" of clearance when installing along a wall. This will allow for the door to open 90 degrees without contacting the wall.
- Allow 2" minimum clearance at rear for proper air circulation and water/electrical connections.
- Allow a 3/8" minimum clearance at sides and top for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not install next to a wall.
Please note: The above dimensions and cutout information is for planning purposes only. For complete installation details, consult manual packed with product, or download manual online at samsung.com.
Kitchen measurements for installation
Measure height including flooring. Be sure to allow for hinge clearance height if needed.
Measure width including countertop overhang.
Measure depth including molding or trim.
Walk the delivery route
- Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.
- Appliance depth or width must be smaller than the width of the narrowest opening.
Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
