OSLO Comoda Doble 6 Cajones Assembly Instructions
This document provides comprehensive instructions for assembling the OSLO Comoda Doble 6 Cajones. Please read all instructions carefully before beginning assembly.
Product Information
Model Numbers: 126633/126634/126635
Estimated Assembly Time: 3 hours
Tools Required: Screwdriver (x1), Hammer (x1), Measuring Tape (x1)
Date of Issue: 10-05-2024
Parts List and Hardware
The assembly process requires various components and hardware. Refer to the diagrams for specific part identification and quantities.
- Main Panels: Top, bottom, sides, back panels.
- Drawer Components: Drawer fronts, sides, backs, and bottoms.
- Hardware: Screws (various sizes including Ø15 mm, Ø8x30 mm, Ø3.5x15 mm, Ø3.5x20 mm, Ø1.4x25 mm, Ø7x50 mm, M4x31-40), Dowels (Ø5 mm), Cam Locks (MS x42), Cam Bolts (TM x42), Drawer Slides (KK x74), Handles (SG x8), Other fasteners (PR x6, EM x38, EN x36, KT x2, G x132, BP x10, KF x12, KdK x1, ZM x12, SM x4).
Assembly Steps
Follow the numbered steps carefully. Ensure all parts are correctly oriented before proceeding.
Step 1-3: Attaching Drawer Slides
Attach the drawer slides (EM) to the side panels using screws (PR) and specific fasteners (EM). Ensure correct alignment as per diagrams.
Step 4-6: Assembling the Main Frame
Connect the main panels using the provided hardware. Pay attention to the orientation of the drawer slides (TM) and supports (SG, KK, MS).
Step 7-8: Assembling Drawers
Assemble the drawer boxes by connecting the drawer sides, front, back, and bottom. Insert drawer slides (KK) and attach handles (SG).
Step 9-11: Installing Drawers and Top Panel
Insert the assembled drawers into the main frame. Attach the top panel (1) to the unit.
Step 12-17: Final Assembly and Drawer Adjustments
Secure the back panels and ensure all connections are tight. Adjust drawer fronts for proper alignment.
Step 18: Drawer Operation
Check the smooth operation of all drawers.
Important Safety Information
Anti-Tip Warning: To prevent furniture from tipping over, it must be permanently secured to the wall. Check the type and strength of your wall and use appropriate screws and dowels. Installation should be performed by a competent person.
Cleaning and Maintenance
Cleaning: Carefully remove dust with a soft, clean, damp cloth. Use mild soapy water. Never use abrasive products or solvents. Do not use excessive water.
Maintenance: Periodically re-tighten screws. Keep the assembly instructions for future reference, especially for claiming missing parts.
