Beko Built-in Combi Refrigerator Installation Guide
Document Number: 5858790100 - AH
Model Reference: K69400
Tools Required
- T25 Screwdriver
- PH2 Screwdriver
Parts are labeled a through m in the diagrams.
Installation Dimensions and Clearances
This section details the required space and measurements for installation.
Ventilation Requirements:
- Minimum ventilation area: 200 cm² (required in multiple locations).
Overall Unit Dimensions:
- Height: 1934 mm (unit height), with a required installation height range of 1943.5 mm to 1944.5 mm.
- Depth: 160 mm, 186 mm (specific placement depths indicated).
Required Widths and Spacings:
- 714 mm
- 479 mm
- 689 mm
- 545 mm
- 1187 mm
- 673 mm
- 74 mm
- min. 563 mm
- 544 mm
- 76 mm
- 1157 mm
- 636 mm
- 37 mm
- 4 mm
- 41.5 mm (indicated for specific component placement)
Important Notes:
- Ensure there is no wooden back wall in the installation space.
Component Identification and Assembly Steps (Diagrammatic)
The following describes the visual steps and part references from the diagrams:
- Diagrams show various parts labeled with letters (a-m, A-D).
- Specific steps illustrate the attachment or placement of these parts using screws (T25, PH2) and other fixings.
- Measurements are critical for correct positioning, as detailed in the previous section.
- The diagrams depict the sequence of assembly, showing how different components (e.g., panels, doors, internal fittings) are integrated.
- Part labels a, b, f, j, l, m, A, B, C, D are shown in various configurations indicating placement and connection points.
Parts List
The following part numbers are identified in the documentation:
- 5707140100
- 4647210100
- 5842140100
- 4049730100
- 5842130200
- 5842130100
- 4647240100
- 4646110100
- 5840530100
- 4227833400
- 4647220100
- 4647230100
