K54275 / K54306 Sliding Refrigerator Installation Guide
Installation Instructions: EN Installation instructions, FR Instructions d'installation, DE Hinweise zur Installation, IT Istruzioni di installazione, RO Instrucţiuni de instalare, TR Montaj Talimatları, PL Instrukcje Instalacji
Product Models: K54275 / K54306 - Sliding (85)
Document Identifier: 4578349105_AE
Safety and General Information
- [Important Information Symbol] Always read the manual before installation.
- [Two Person Lift Recommended Symbol] Installation requires two people.
- [Wear Gloves Symbol] Wear protective gloves during installation.
- [Forbidden Action Symbol] Do not attempt installation if any part is damaged.
Tools and Parts Required
Tools:
- Screwdriver with PH2 bit
- T25 screwdriver bit
- Drill with Ø2 bit
- Scissors
Parts List:
- a: Screw (x13)
- b: Screw (x1)
- c: Screw (x4)
- d: Washer (x2)
- e: Screw (x2)
- f: Bracket (x2)
- g: Rail component (x2)
- h: Rail component (x2)
- i: Cover panel (x1)
- j: Cover panel (x1)
- k: Rail assembly (x4)
- L: Rail assembly (x4)
- m: Mounting bracket (x1)
- n: Sliding rail (1 x 1120 mm for K54275, 1 x 1275 mm for K54306)
- Additional sliding rail component (1 x 695 mm)
Installation Dimensions and Clearances
Ensure adequate space for ventilation and door opening. Refer to the specific dimensions for your model:
- K54275 (85):
- Overall Height: 1775 mm
- Cabinet Height Range: 1778-1788 mm
- Cabinet Width: 540 mm
- Cabinet Depth: min. 555 mm
- Top Clearance: 1775 mm
- Side Clearance: 8 mm
- Back Clearance: 40 mm
- Ventilation: min. 200 cm² at top and bottom
- Door Opening: 90°
- K54306:
- Overall Height: 1935 mm
- Cabinet Height Range: 1940-1950 mm
- Cabinet Width: 545 mm
- Cabinet Depth: min. 555 mm
- Top Clearance: 1935 mm
- Side Clearance: 8 mm
- Back Clearance: 40 mm
- Ventilation: min. 200 cm² at top and bottom
- Door Opening: 90°
- General Clearances:
- Various component clearances: 17 mm, 71 mm, 629 mm, 1001 mm (K54275) / 1159 mm (K54306), 40 mm, 8 mm, 32 mm, 4 mm, 2 mm.
Step-by-Step Installation
Follow these steps carefully to install your sliding refrigerator.
- Step 1: Attach rail components (g, h) to the cabinet using screws (a). Ensure correct alignment.
- Step 2: Attach runner components to the appliance door using screws (a). Maintain a 42 mm distance from the edge.
- Step 3: Carefully position and mount the appliance into the prepared cabinet space.
- Step 4: Assemble the sliding mechanism. Attach components using screws (a, b, e) and part (j). Secure parts with an audible "Click".
- Step 5: Connect the appliance door to the assembled sliding mechanism. Use screws (a, b, e) and part (j). Ensure a secure "Click" connection.
- Step 6: Complete the installation by attaching cover panels (i, j) and any remaining brackets or mounting hardware (m). Ensure all connections are secure.
