Resistex ENEIR Luminaire

Safety and General Information

Safety Notes

⚠️ Never work when voltage is present on the luminaire.

The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.

Risk of electrostatic discharges. [ESD]. Handle with precautions.

Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

Do not use chemicals or abrasive products to clean the fixture.

Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Technical Specifications

• Warranty: 5 years
• Color Rendering Index (CRI): 80
• Impact Resistance (IK): 10
• Ingress Protection (IP): 66
• Certifications: CE, RoHS

Base (Borne) Installation

Step 1: Preparation and Assembly

This step involves preparing the base unit and pole components. It includes the assembly of the base with screws (X4) and mounting hardware (X1), illustrating how the base is prepared and attached to the pole.

Step 2: Ground Installation

The diagram shows the base being installed into the ground. It highlights correct installation with gravel for drainage (✅) and incorrect installation without it (❌). A recommended installation depth of 15cm is indicated.

Step 3: Electrical Connection and Activation

This step shows the connection point and the luminaire head being attached to the base. It includes an instruction to press and hold for 2 seconds ([Press and hold for 2 seconds]) for activation or setup.

Pole Top (Tête de mât) Installation

Step 1: Mounting the Luminaire Head

This step shows the luminaire head being mounted onto the pole top, including the use of mounting hardware (X1).

Step 2: Final Connection and Activation

This step illustrates the final assembly of the luminaire head onto the pole. It includes an instruction to press and hold for 2 seconds ([Press and hold for 2 seconds]) for activation or setup.

Company Information

RESISTEX EXPLOITATION
11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France
Tel: +33 4 93 276 276 | Fax: +33 4 93 276 280
Email: contact@resistex-sa.com
APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - VAT FR 73 487 593 477