Resistex VIJI Luminaire Installation Guide

Safety Instructions

• Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Installation Procedures

This section details the mounting and installation of the VIJI luminaire. The document outlines steps for different configurations, including ceiling, ON/OFF, and DALI versions.

General Mounting Steps

The general installation process involves several steps, indicated by numbered diagrams. These steps typically require specific quantities of fasteners, denoted as X2 and X4, suggesting the use of two and four fixing points or components respectively.

Ceiling Version Installation

For the ceiling version, the installation involves four main steps. These steps utilize four fasteners (X4) and two fasteners (X2) at various stages, indicating the assembly of different parts of the luminaire to the ceiling structure or its housing.

ON/OFF Version Installation

The ON/OFF version installation includes a specific step, step 4, which requires four fasteners (X4). This suggests a particular mounting or securing mechanism for this functional variant.

DALI Version Installation

While the DALI version is mentioned, specific installation steps are not detailed in the provided diagrams for this variant. The focus is on the general mounting and the ON/OFF version's specific step.