Hover-1 Gambit Electric Folding Scooter Operation Manual

Introduction

This manual provides essential information for the safe operation and maintenance of the Hover-1 Gambit electric folding scooter. Users should read it thoroughly before riding.

The Gambit is a personal transporter developed with strict testing. Operating the Gambit without following the manual's contents may lead to damage to the scooter or bodily injury.

Package Contents

• Hover-1 Gambit Electric Folding Scooter
• Wall Charger
• Operation Manual

The Hover-1 Gambit's serial number is stamped on the kickstand side of the platform. Users should record the serial number in the designated area of the warranty section for future reference, especially if the scooter is lost or stolen.

Safety Precautions

Thank you for purchasing the Hover-1 Gambit. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies to the Hover-1 Gambit.

• To avoid dangers caused by collisions, falls, and loss of control, users should learn how to ride the Gambit safely.
• Operating skills can be learned by reading the product manual and watching videos.
• This manual includes operating instructions and precautions. Users must read it carefully and follow the instructions.
• All users are responsible for any consequences caused by violating warning contents or prompt operations. Hover-1 cannot be held liable.

Attention

1. Use only the supplied charger with this scooter. Charger Manufacturer: COMING DATA CO LTD, Model: CP4215.
2. The operating temperature range of the charger is 32 – 77° F (0 – 25° C).
3. The operating temperature range of the E-Scooter is 32 – 104° F (0 – 40° C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Gambit in a dry, ventilated environment.
7. When transporting the Gambit, avoid violent crashes or impact.

Low Temperature Warning

Low temperatures affect the lubrication of moving parts inside the Gambit, increasing internal resistance. Additionally, discharge capacity and battery capacity significantly decrease in low temperatures. Use caution when riding the Gambit in cold temperatures (below 40 degrees F). Doing so may increase the risk of mechanical failures, leading to device damage, other property damage, serious bodily injury, and even death.

General Safety Instructions

• Keep the device away from heat sources, direct sunlight, humidity, water, and any other liquids.
• Do not operate the device if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, injury, and device damage.
• Do not use the device if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by the manufacturer. Improper repair voids the warranty and may place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in any way.
• Keep the device free from dust, lint, etc.
• Do not use this device for anything other than its intended use or purpose. Doing so may damage the device or lead to property damage, injury, or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or installed batteries to excessive heat, such as direct sunlight or open flame.
• Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive-train while the Gambit is running.
• Do not operate, or allow others to operate, the Hover-1 Gambit until the user understands all instructions, warnings, and safety features described in this manual.
• Consult a doctor if you have a medical condition that could affect your ability to use the Hover-1 Gambit.
• Persons with head, back, or neck ailments or prior surgeries to those areas of the body are not recommended to use this Hover-1 Gambit.
• Do not operate if pregnant, have a heart condition, or both.
• Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand, and perform all safety instructions and assume inherent hazards should not use the Hover-1 Gambit.

Helmet Safety

Helmets save lives! Always wear a properly fitted helmet that complies with CPSC or CE safety standards when riding the scooter.

Correct Helmet Fitting

Ensure your helmet covers your forehead.

Incorrect Helmet Fitting

If the forehead is exposed, it is vulnerable to serious injury.

Serial Number

Users should keep the serial number on file for warranty claims and as proof of purchase.

Riding Safety Precautions

The first rule in safe riding is to use common sense. Different localities and countries have different laws governing riding electric transportation devices on public roads. Users should check with local officials to ensure compliance with local traffic law requirements. Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.

• Obey all local traffic laws: red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
• Ride with the traffic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if passing from behind.
• Slow down at all street intersections and look left and right before crossing.

The Gambit electric folding scooter is not equipped with reflectors. Riding in conditions of low visibility is not recommended. If riding in low-visibility conditions, ensure the LED light is turned on and wear bright, reflective clothing.

Always think about safety when riding. Many accidents can be prevented by prioritizing safety.

Safety Checklist

• Do not ride above your skill level. Ensure sufficient practice with all functions and features of the Gambit.
• Do not ride too fast; increased speed comes with increased risk. At higher speeds, small bumps can turn into large impacts, leading to a higher risk of injury.
• Do not ride with pets.
• Before stepping on the Gambit, ensure it is placed flat on level ground and the power is on.
• Do not try to open or modify the Gambit scooter. Doing so voids the manufacturer warranty and may cause the Gambit to fail, resulting in injury or death.
• Do not use the Gambit in a manner that would put people or property in danger.
• If riding with others, maintain a safe distance to prevent collisions, property damage, serious injuries, or death.
• Keep feet on the scooter at all times. Moving feet off the scooter while driving is dangerous and may cause the scooter to stop or veer sideways.
• Do not operate the Gambit while under the influence of drugs and/or alcohol.
• Do not operate the Gambit when restless or sleepy.
• Use best judgment to avoid dangerous situations with the Gambit.
• Do not ride the Gambit scooter off curbs, ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard. Misuse voids the manufacturer warranty and may lead to injury or damage.
• Do not abuse the Gambit; doing so can damage the unit and cause operating system failure, potentially leading to injury. Physical abuse, including dropping the scooter, voids the manufacturer warranty.
• Do not operate in or near puddles of water, mud, sand, stones, gravel, debris, or near rough and rugged terrain.
• The Gambit can be used on paved surfaces that are flat and even. If encountering uneven pavement, lift the Gambit scooter over the obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleet, on icy roads, or in extreme heat or cold.
• Bend knees when riding on bumpy or uneven pavement to absorb shock and vibration and help maintain balance.
• If unsure about safely riding on specific terrain, step off and carry the Gambit.

• Do not attempt to ride over bumps or objects greater than ½ inch, even when prepared and bending knees.
• Pay attention to road conditions, people, places, property, and objects around you.
• Do not operate the Gambit scooter in crowded areas.
• Operate the Gambit scooter with extreme caution indoors, especially around people, property, and narrow spaces.
• Do not operate the Gambit while talking, texting, or looking at a phone.
• Do not ride the Gambit scooter where it is not permitted.
• Do not ride the Gambit near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Gambit is intended for use by a single individual. Do not attempt to operate the Gambit with two or more people.
• Do not carry anything while riding the Gambit scooter.
• Individuals with lack of balance should not attempt to operate the Gambit scooter.
• Pregnant women should not operate the Gambit scooter.
• Young children and the elderly should not operate the Gambit.
• At higher speeds, always consider longer stopping distances.
• Do not attempt to jump on or off the Gambit scooter.

Care & Maintenance

• Do not expose the device to liquid, moisture, or humidity to avoid damage to the product's internal circuitry.
• Do not use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperatures, as this will shorten the life of the electronic device, destroy the battery, and/or distort certain plastic parts.
• Do not dispose of the device in fire, as it may explode or combust.
• Do not expose the device to contact with sharp objects, as this will cause scratches and damage.
• Do not let the device fall from high places, as doing so may damage the internal circuitry.
• Do not attempt to disassemble the device.
• Use only the charger provided by Hover-1.

Battery Care / Maintenance

Battery Specifications

Battery Maintenance

The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.

• When charging the device, use the enclosed 1-pin charging cable or otherwise ensure that the battery charging conditions are met.
• Do not connect or attach the device or the battery to a power supply plug or directly to a car's cigarette lighter.
• Do not place the device or batteries near a fire or into direct sunlight. Heating the device and/or the battery can cause additional heating, breaking, or ignition of the battery inside the device.
• Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite.

To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

• Do not attempt to modify, change, or replace your battery.
• Do not use your device if the battery begins to emit odor, overheats, or begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances; do not open the battery or insert anything into it.
• Please only use the charger provided by Hover-1.
• Do not attempt to charge the device if the battery has discharged or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.

Lithium-ion batteries are considered hazardous materials. Please follow all local, state, and federal laws regarding recycling, handling, and disposing of Lithium-ion batteries.

Specifications

Parts List

The Hover-1 Gambit scooter includes the following main components:

1. Scooter (main body)
2. Handle Bars (left and right)
3. Wall Charger
4. Allen Wrench

Hover-1 Gambit Diagram & Features

The Hover-1 Gambit scooter features various components for operation and control:

• 1. Handlebars (L): Left handlebar grip.
• 2. LCD Display: Screen showing battery life, speed, and other information.
• 3. Handlebars (R): Right handlebar grip.
• 4. Electric Brake: Lever for electric braking.
• 5. Power/Function Button: Used to power on/off and cycle through display modes.
• 6. Throttle: Used to accelerate the scooter.
• 7. Release Lever: Mechanism for folding/unfolding the steering column.
• 8. Aluminum Frame: The main structural body of the scooter.
• 9. Mechanical Brake: Foot-operated brake on the rear fender.
• 10. Kickstand: Supports the scooter when stationary.
• 11. Foot Pad: The platform where the rider stands.
• 12. Charging Port: Where the charger connects to the scooter.

LCD Display Functions

The LCD display provides key operational information:

• Battery Life Indicator: Displays current battery life.
• Speed Indicator: Displays current speed in Mph.
• Speed Level Button (+): Used to increase top speed and acceleration (1-Low, 2-Medium, 3-High).
• Power / Function Button: Press and hold for 2 seconds to power ON/OFF. Press to cycle through total mileage, current trip distance, voltage, and current trip time.
• Speed Level Button (-): Used to decrease top speed and acceleration (1-Low, 2-Medium, 3-High).
• Information Panel: Displays total mileage, current trip distance, voltage, and current trip time.
• Speed Level Indicator: Displays the current speed level.

Charging Your Gambit

Charging the Device

• Ensure the charging port is clean and dry, free of dust, debris, or dirt.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V ~ 240V; 50/60 Hz).
• Align and connect the 1-pin charging cable into the charging port of the Dynamo Scooter. (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.)
• The charging indicator light on the charger itself should change to RED, indicating that the device is now being charged.
• When the RED indicator light on the charger turns to GREEN, the device is fully charged.
• After fully charging the Dynamo Scooter, unplug the charger from the device and from the power outlet.

Preparing Your Scooter

Attaching the Handlebars

Attach the handlebars by placing them into the appropriate sockets and twisting them in the correct direction (clockwise for right, counter-clockwise for left).

Pinch Points

Some parts of the Hover-1 Gambit can cause injury if mishandled. Moving and folding parts can cut skin. Clamps and pivoting parts such as brake levers can pinch. When folding and unfolding the Hover-1 Gambit, users should watch for pinch points where possible injury may be sustained. Do not leave hands in these areas during folding or unfolding.

Folding & Unfolding

Folding & Unfolding Your Gambit Scooter

To fold the Gambit, press down on the rear wheel fender and pull the steering column up. Raise the release lever up and push it into place to secure the steering column. Twist the black piece in the center to lock it. Ensure the steering column is secured in place before riding.

Speed Modes

To change speed modes, ensure the scooter is powered on. Press the speed level up and down buttons until the desired speed mode is selected:

• 1 - Top Speed: 7mph
• 2 - Top Speed: 11mph
• 3 - Top Speed: 16mph

Kick to Start

For safety reasons, the scooter will not accelerate unless it is already moving at least 26km/h (16mph). Users must first kick off the ground and then press the throttle to ride the scooter.

Before Riding

It is important to fully understand all elements of the Gambit scooter. If these elements are not used correctly, users will not have full control of the Gambit. Before riding, learn the functions of the various mechanisms on the scooter. Practice using these elements of the Gambit at slower speeds in a flat, open area before taking the device out in public areas.

Pre-Ride Checklist

Ensure the Gambit is in proper working order each time it is ridden. If a part of the Gambit scooter does not function correctly, contact Customer Support Center.

• Ensure the battery is fully charged before riding.
• If the Gambit scooter is not used for an extended period, recharge the battery every 2 months to maintain battery life.
• Wear all appropriate safety and protective gear as previously mentioned in the User Manual.
• Wear comfortable clothes and flat closed-toe shoes.
• Carefully read the Operation Manual for basic working principles and tips to enjoy the experience.

Riding Your Gambit Scooter

Operating Your Device

Ensure the device is fully charged before first use. Before turning on the Gambit scooter, ride it like a normal kick scooter to get comfortable with the device without the motor. Once comfortable, power it on. For the motor to activate, start riding the scooter and then push the throttle down with a thumb. To slow down, push the electric brake down, which stops the motor and slows the scooter. Also, press the mechanical brake with a foot to manually slow down the scooter. To turn, use the handlebar in the desired direction. The Gambit scooter can be operated manually if the motor is not desired. As users become comfortable, maneuvering will become easier. At higher speeds, it is necessary to shift weight to overcome centrifugal force. Prepare to brace if encountering bumps or uneven surfaces, then dismount and carry the Gambit to a safe operating surface.

Weight and Speed Limitations

Speed and weight limits are set for safety. Do not exceed the limits listed in the “Specifications” section of this manual.

Operating Range

The following factors affect the operating range of the device:

• Terrain: Riding distance is highest on smooth, flat surfaces. Riding uphill and/or on rough terrain significantly reduces distance.
• Weight: A lighter user will have further range than a heavier user.
• Ambient Temperature: Ride and store the device under recommended temperatures, which increases driving distance, battery life, and overall performance.
• Speed and Riding Style: Maintaining a moderate and consistent speed produces maximum distance. Traveling at high speeds for extended periods, frequent starts and stops, idling, and frequent acceleration or deceleration will decrease overall distance.

*Do not attempt to stop suddenly, as this may lead to injury or damage to the brake discs.

Safety Alerts

While riding the Gambit Scooter, if a system error or illegal operation occurs, the device will prompt the user in various ways. Common occurrences for Safety Alerts include:

• Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
• Battery voltage too low.
• Device is still charging.
• Overheating, or motor temperature too high.
• When the battery is about to run out of power, the battery icon will flash.
• If any or both tires are blocked, the device will stop after 10 seconds.
• When the battery level has depleted below protection mode, the device motor will power off after 15 seconds.

While sustaining a high discharge current during use (e.g., riding up a steep slope for a long period), the device motor will power off after 15 seconds.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

For warranty information, please visit www.hover-1.com.

Manufacturer: DGL Group, Ltd. 195 Raritan Center Parkway Edison, NJ 08837

Users should affix their serial number label in the designated area for warranty claims and proof of purchase.

Connect with Hover-1

• Facebook: @RideHover1
• Instagram: @RideHover1
• Twitter: @RideHover1
• Website: www.Hover-1.com