ASCO 5210 Digital Power Meter Operator's Manual

Introduction

The ASCO 5210 Digital Power Meter (DPM) is an advanced device designed for comprehensive real-time monitoring of electrical power systems. It accurately measures and displays critical parameters such as voltage, current, active power (kW), reactive power (kVAR), apparent power (kVA), energy (kWh, kVARh), power factor (PF), and frequency.

Key Features

High-resolution graphic LCD display with intuitive membrane controls for easy operation.
Supports multiple communication protocols including ASCOBUS II, serial Modbus RTU, and APAC interfaces.
Facilitates remote data access and system management through connectivity modules.
Designed for standard metering applications, often integrated with ASCO Power Control Systems and Automatic Transfer Switches (ATS).

System Compatibility

The ASCO 5210 DPM is versatile and supports various electrical system configurations:

Single Phase: 2-wire and 3-wire systems.
Three Phase: 3-wire Delta and 4-wire WYE systems.

Manufacturer Information

Manufactured by ASCO Power Technologies, this operator's manual provides detailed guidance on installation, initial setup, operation, and specifications to ensure optimal performance and safety.

For more information, visit www.ascopower.com.

	ASCO 5150 Connectivity Module Installation Manual \| ASCO 5100 Series This installation manual details the ASCO 5150 Connectivity Module, a device for integrating ASCO Automatic Transfer Switches (ATS), Power Managers, and Digital Power Meters into Ethernet networks. It covers installation, configuration, and troubleshooting for seamless monitoring and control of power systems.
	ASCO 5100 Series Connectivity Module Installation Manual This installation manual for the ASCO 5100 Series Connectivity Module (Catalog 5150) details how to install, configure, and integrate the device with ASCO Automatic Transfer Switches (ATS) and Power Managers. It enables remote monitoring and data access over Ethernet for various ASCO ATS models and Power Managers, and supports third-party Modbus devices.
	ASCO Group G Controller Series 300 Transfer Switches Data Sheet Detailed data sheet for the ASCO Group G Controller, part of the SERIES 300 Transfer Switches, outlining its features, selectable options, remote control capabilities, and time delay settings for reliable power management.
	ASCO Series 300 Power Transfer Switches: Technical Data and Ordering Guide Comprehensive technical data, specifications, dimensions, and ordering information for ASCO Series 300 Automatic and Non-Automatic Power Transfer Switches.
	ASCO 7000 Series Generator Paralleling Control Switchgear \| Advanced Power Solutions Discover the ASCO 7000 Series Generator Paralleling Control Switchgear, the world's most intelligent and advanced system for mission-critical and healthcare applications. Learn about its features, operational modes, and network capabilities for reliable emergency power.
	ASCO Series 300, 386, and 300SE Power Transfer Switches: Features, Applications, and Specifications Comprehensive overview of ASCO Series 300, 386, and 300SE automatic and non-automatic power transfer switches, detailing their features, typical applications, technical specifications, dimensions, and ordering information for reliable emergency and standby power solutions.
	ASCO 300 Series Automatic Transfer Switch Operator's Manual Operator's manual for the ASCO 300 Series Automatic Transfer Switch (ATS). Provides essential information on installation, operation, safety, wiring data, and mounting for emergency and standby power systems.
	ASCO Series 300 Generator Paralleling System Operator's Manual This operator's manual details the ASCO Series 300 Generator Paralleling System, covering installation, operation modes, features like bus optimization and load demand, operator controls, and factory default settings for efficient power management and reliable generator control.

Introduction

Key Features

System Compatibility

Manufacturer Information

Related Documents