Takstar WPM-300 Wireless Monitoring System

Preface

Dear Customer,

Thank you for purchasing the Takstar WPM-300 Wireless Monitoring System. To ensure you can better understand and use this product, please read this manual carefully. If you have any questions or valuable suggestions, please contact Takstar via the official service hotline 4006828333 or by scanning the QR code to follow the official Takstar WeChat account.

Features

• A wireless monitoring system designed for instrument monitoring, stage monitoring, and simultaneous interpretation.
• UHF wireless transmission with PLL (phase-locked loop) technology for stable and reliable operation.
• Features a composite anti-interference circuit that automatically avoids interfering frequencies, supporting multiple bodypack receivers simultaneously.
• Supports up to 10 transmitters working concurrently, suitable for multilingual interpretation scenarios.
• Transmission distance of approximately 50 meters in environments without interference or obstructions.
• Utilizes a dynamic companding circuit for a high signal-to-noise ratio, ensuring clear output sound.
• Comes with comfortable in-ear monitors that provide delicate and full sound with strong bass.
• The transmitter has a 3.5mm audio input interface for easy connection with audio equipment like mixers and amplifiers.

Applications

Suitable for instrument monitoring, stage monitoring, conference monitoring, and simultaneous interpretation.

Package Contents

WPM-300 (Set)

• Transmitter: 1 pc
• Bodypack Receiver: 1 pc
• In-Ear Monitors: 1 pair
• Silicone Ear Tips (S, M, L): 3 pairs
• AA Dry Battery: 2 pcs
• 3.5mm Audio Cable: 1 pc
• RCA Audio Cable: 1 pc
• 3.5mm to 6.3mm Plug: 1 pc
• 12V/300mA Adapter: 1 pc
• User Manual: 1 pc

Specifications

Transmitter Specifications

• Operating Frequency Range: 520-600MHz
• Operating Current: 100mA (TYP)
• Power Supply: DC 12V/300mA
• Transmitting Distance: $\geqslant 50 \mathrm{~m}$ (open, interference-free area)
• Transmitting Power: 5dbm (TYP)
• Dimensions: $159 \times 79.8 \times 21.1 \mathrm{~mm}$
• Weight: 123 g

Receiver Specifications

• Frequency Range: 520-600MHz
• Operating Voltage: DC 2.5V (2.2V-3.0V) / Two AA batteries
• Operating Current: 115 mA (TYP)
• Frequency Response: 20 Hz to 15 kHz (-6dB intercept point)
• Signal-to-Noise Ratio: >60dB
• Receiving Sensitivity: better than 8dbuv
• Stereo Separation: >45dB
• Dimensions: $169 \times 64 \times 30.95 \mathrm{~mm}$
• Weight: 123.5 g

Note: The above data is obtained from Takstar laboratory tests, and Takstar reserves the final right of interpretation.

Function Descriptions

Transmitter (Main Unit)

1. Power Switch: Slide to "|" for ON, "0" for OFF.
2. LED Display Screen: Shows the current working channel (CH01-CH10).
3. Headphone Knob: Adjusts the volume for the transmitter's headphone output.
4. Input Interfaces: One 3.5mm stereo audio input and one pair of RCA audio input interfaces for connecting external audio sources.
5. SET Button: Press to switch channels. Refer to the 'Sync Frequency' section for details.
6. 3.5mm Headphone Output Interface: Connect headphones here to monitor the audio output.
7. Power Interface: Connect the 12V/300mA adapter for power supply.
8. Antenna Connector: Connect the external antenna to enhance signal reception.

Bodypack Receiver

1. Power Switch: Press and hold for 2 seconds to power ON/OFF.
2. Indicator Light: Power indicator. Solid green for normal battery level, solid red for low battery.
3. Volume Control: Adjusts receiver volume in 10 steps. Press '+' to increase, '-' to decrease. (Default is level 5, with memory function).
4. SET Button: Press to switch channels. Refer to the 'Sync Frequency' section for details.
5. Display Screen: Shows current working channel (CH01-CH10), battery level (3 bars), and wireless connection status (solid signal icon for connected, flashing for weak signal, off for disconnected).
6. External Antenna: 1/4 wavelength antenna to enhance signal transmission distance.
7. Headphone Interface: Connect headphones for sound monitoring.

Operation Instructions

Sync Frequency

The product is pre-paired at the factory and will connect automatically upon power-on. If signal interference occurs, follow these steps for re-pairing or frequency change:

1. Turn on the power switches for both the transmitter and receiver.
2. Press the "SET" button on the transmitter to change the channel.
3. Press the "SET" button on the receiver to change its channel to match the one displayed on the transmitter.

Operation Instructions

1. Connect one end of the supplied adapter to the transmitter and the other end to a mains power socket.
2. Connect one end of the adapter cable to the transmitter's audio input interface and the other end to the audio output device.
3. Turn on the transmitter's power switch. The LED screen indicator will light up, indicating normal operation.
4. Simultaneously press the retractable buttons on the receiver's battery compartment to remove it. Install two AA batteries, then push the battery compartment back into the receiver until the retractable buttons click into place.
5. Insert the headphone plug into the receiver's headphone jack.
6. Press and hold the receiver's power switch for two seconds to turn it on. The indicator light will illuminate, signifying the receiver is operational.
7. Adjust the "SET" button to match the receiver's channel to the transmitter's channel. The signal icon on the receiver's screen will become solid when paired successfully.
8. Adjust the volume using the "-" or "+" buttons on the receiver to achieve your desired volume level.

Safety Instructions

To prevent personal injury or property loss due to electric shock, overheating, fire, radiation, explosion, mechanical hazards, or improper use, please read and adhere to the following precautions before using this product:

1. Ensure the power of the connected equipment matches this product's specifications and adjust the volume appropriately. Avoid prolonged use at over-power or high-volume levels to prevent product malfunction.
2. If any abnormality occurs during use (e.g., smoke, unusual odor), immediately turn off the power switch, unplug the power adapter, and send the product to a dealer for inspection.
3. Never use batteries with damaged insulation. Do not attempt to charge non-rechargeable batteries.
4. Dispose of used batteries in designated recycling bins. Do not allow children to play with batteries or discard them directly, as this can create safety hazards or environmental pollution.
5. Store this product and its accessories in a dry, well-ventilated indoor location. Avoid prolonged storage in humid or dusty environments. Keep away from heat sources, rain, water ingress, excessive impact, dropping, or vibration. Do not cover ventilation openings to prevent damage to functionality.
6. Comply with relevant safety regulations when using this product. Do not use the product in locations prohibited by laws or regulations to prevent accidents.
7. Do not attempt to disassemble or repair the product yourself to avoid personal injury. For any issues or service needs, please contact your local dealer.

Label Meanings

According to the test results obtained based on RL2004/108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: WRAWPM-300TX.

WEEE Symbol: This symbol indicates that, according to the WEEE Directive (2012/19/EU) and national laws, this product should not be disposed of with household waste due to potentially hazardous substances. It must be handed over to an authorized WEEE collection facility for recovery and recycling, aiding in the effective utilization of natural resources. Contact your local municipality for more information on WEEE disposal.

About This Manual

This manual contains technical specifications as of the printing date. Takstar continuously improves its products, so specifications may not perfectly match your specific product. For the latest version and more information, please visit the Takstar official website: https://www.takstar.com/. Specifications, devices, and accessories may vary by region. Please contact your local Takstar dealer for any questions.

Product Service Guarantee

Important Note:

• This document serves as a warranty certificate; please keep it safe. Lost certificates will not be honored for warranty or exchange.
• Warranty Period: Twelve months from the date of purchase.
• Takstar is responsible for free repairs, except for damages caused by force majeure events.
• Damages due to improper care or use will be subject to a repair fee at the service point's discretion.
• Unauthorized disassembly or repair will void the warranty.
• The above warranty terms are applicable only to the China market (excluding Hong Kong, Macau, and Taiwan regions).

Product Service Guarantee Form

Repair Record (To be filled by technician)

Manufacturer Information

Manufactured by Guangdong Takstar Electronic Co., Ltd. / Guangdong Acoustic Engineering Technology Research and Development Center

Address (China): No. 2 Fu Kang Yi Rd., Longxi Boluo, Huizhou, Guangdong 516121 China

Service Hotline (China): 400 6828 333

Fax (China): 0752 6383950

Email (China): xs@takstar.com

Website (China): www.takstar.com

Address (International): No. 2 Fu Kang Yi Rd., Longxi Boluo, Huizhou, Guangdong 516121 China

Tel (International): 86 752 6383644

Fax (International): 86 752 6383952

Email (International): sales@takstar.com

Website (International): www.takstar.com