VOVO STYLEMENT BIDET USER MANUAL

Product Characteristics

The VOVO STYLEMENT bidet seats offer various features:

• VB-4000SE (elongated) / VB-4100SR (round): Posterior wash, Feminine wash, Turbo wash, Dry, Deodorization, UV LED Sterilization.
• VB-3000SE (elongated) / VB-3100SR (round): Posterior wash, Feminine wash, Turbo wash, Dry, LED light.
• VB-2500W (elongated) / VB-2600W (round): Posterior wash, Feminine wash, Turbo wash, Dry, Deodorization, LED light.

Important Safety Instructions

When using electric appliances, especially when children are present, basic safety precautions should always be followed. Read all instructions before using.

DANGER

As with most electric appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Do not use while bathing. [?]
2. Do not place or store appliance where it can fall or be pulled into a tub or sink. [?]
3. Do not place in or drop into water or other liquid. [?]
4. If an appliance falls into water, unplug it immediately. Do not reach into the water. [⚠️]

WARNING

To reduce the risk of burns, electrocution, fire or injury to persons:

1. Close supervision is necessary when this appliance is used by, on, or near children or invalids. [⚠️]
2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. [?]
3. Never operate this appliance if it has a damaged cord or plug, is not working properly, or has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair. [?]
4. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance. [?]
5. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and other objects. [?]
6. Never use while sleeping. [?]
7. Never drop or insert any object into any opening or hose. [?]
8. Do not use outdoors or operate where aerosol (Spray) products are being used or where oxygen is being administered. [?]
9. Do not use an extension cord with this appliance. [?]
10. Use this appliance only for household use. [✔️]
11. Connect this product to a properly grounded outlet only. See grounding instructions. [✔️]

Hazard Terms Explained:

• [Danger]: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
• [Caution]: Indicates a dangerous situation where the user could suffer death or serious injury if this product is used incorrectly.
• [Prohibited]: Indicates prohibited actions. [?]
• [Observe Strictly]: Indicates to observe the following precautions before using this product. [❗]

Additional Safety Precautions:

• Do not splash water or detergent on the main body or power plug. [?]
• Unplug when to repair the product. [❗]
• Do not use damaged power cord, plug, or loose outlet, and do not supply power to the product which is not installed on toilet or not connected to water supply hose. [?]
• When cleaning, use mild detergent and soft cloth. Do not use household detergent, benzene, paint thinner, nylon scrubber. [✔️]
• Use tap water. [✔️]
• Do not connect with industrial water or gray water. [?]
• Make sure the product is properly grounded. [✔️]
• If the product is not grounded, it can cause electric short or electric leakage. For grounding work, consult an electric technician nearby.
• One of the following persons needs to have someone to turn off the temperature controller of the seat and warm air blower when using heated seat: Children or elderly persons who cannot control the temperature appropriately by themselves; Patients or sick persons who cannot move their body by oneself; Persons on medication that make them drowsy, and fatigued and intoxicated persons. [❗]
• Do not use this product other than for purposes listed in this manual. [?]
• Do not step on, shock, or place heavy objects on the seat, cover, or main body. [?]
• Do not put anything else except toilet paper into the toilet. [?]
• Do not place hand or clothes on the warm air outlet. [?]
• Handle power cord carefully and do not break the cord. Do not fabricate or assemble at user's own discretion. Do not bend, twist, or pull it forcibly. Do not place heavy objects on the cord. [?]
• Do not continue to use the product with faults. Unplug the power plug in the following cases and call the distributor or customer service representative: Water leakage, Strange odor, Hot main body, Smoke. [⚠️]

Grounding Instructions

This product should be grounded to reduce the risk of electric shock. It is equipped with a cord having a grounding wire and a grounding plug, which must be plugged into a properly installed and grounded outlet.

DANGER: Improper use of the grounding plug can result in a risk of electric shock.

If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat-head terminal. The grounding wire is typically green with or without yellow stripes.

Consult a qualified electrician or serviceman if you are unsure about grounding instructions.

This product is for use on a 120 V circuit and has a grounding plug. A temporary adapter (Figure 1, sketches B and C) may be used to connect to a 2-pole receptacle if a properly grounded outlet is not available, but only until a properly grounded outlet can be installed by a qualified electrician. The adapter's green ground lug must be connected to a permanent ground, such as a properly grounded outlet box cover, secured by a screw.

If an extension cord is necessary, use only a three-wire extension cord with a three-blade grounding plug and a three-slot receptacle. Replace or repair any damaged cord.

The product is factory equipped with a specific cord and plug for connection to a proper electronic circuit. Ensure the outlet has the same configuration as the plug. Do not modify the plug; if it does not fit the outlet, have a qualified electrician install the proper outlet. Reconnection for different electronic circuits should be done by qualified service personnel.

Figure 1: Illustrates grounding components: (A) Grounding Pin and Grounded Outlet Box, (B) Adapter connecting to a 2-pole receptacle, (C) Adapter with metal screw for grounding.

Name of Parts

For VB-4000SE (elongated) / VB-4100SR (round):

• Seat Cover
• Main Body
• Power Plug
• Display Panel
• Remote Control Receiver
• Main Body Display Panel
• UV LED Sterilization
• Remote Control
• Heated Seat
• Seat Sensor
• Stainless Nozzle

For VB-3000SE (elongated) / VB-3100SR (round) / VB-2500W (elongated) / VB-2600W (round):

• Seat Cover
• Main Body
• Power Plug
• Side Control Panel
• LED light
• Heated Seat
• Seat Sensor
• Stainless Nozzle

Installation Method

Accessories Included: T-valve, Bolt bracket (2pcs), Base bracket, Hose, Rubber packing (2pcs), Washer (2pcs), Fixing bolt (2pcs), Fixing nut (2pcs), Screws, Two pins for remote, Washer (2pcs), Screw M/S (2pcs), Insert rubber nut (2pcs).

Before Installation:

• Read the instructions carefully before installing.
• Plug in only after complete installation, then supply water.

Installation Procedure:

1. Separate water supply hose: Turn the water supply valve clockwise to lock, and separate the toilet hose using a spanner.
2. Connect the T-valve to the toilet and toilet hose: Place the T-valve between the toilet and the toilet hose.
3. Remove the existing toilet seat: Unfasten the nut and remove the toilet seat. Save the old toilet seat lid and nuts for reinstallation later. Place the template on the toilet after removing the toilet seat cover.
4. Install the base bracket: Place the fixing bolt on the base bracket. Align the front of the bidet body and the front of the toilet before fastening the nuts.
5. Install the bidet and secure the remote control holder: Slide the bidet and install it. Secure the remote control holder to the wall with screws or peel off the double-sided tape sticker on the back of the remote.
6. Connect the hose and turn on the water: Connect the hose to the T-valve and the bidet. Turn the water supply valve counterclockwise to allow water flow. Connect the outlet.

Operation Check:

1. Turn the water supply valve counterclockwise to check for water leakage.
2. Connect the power plug into electrical outlet.
3. Pressing the Posterior button will make water flow into the water tank.
4. Check the functions of each use.

How to Use

The bidet seat can be operated via the remote control or the side panel.

Remote Control Functions:

• [Stop]: Press the Stop button when you want to stop the function.
• [Dry]: Use this after wash functions. Wipe off water with toilet paper before using the dry function for pleasant usage.
• Water Pressure, Nozzle Position: Can be controlled in 5 levels.
• Water Pressure and Nozzle Position Adjustment: Water pressure and nozzle position can be adjusted in 5 levels (Low to High).
• UV LED Light Sterilization: UV LED eliminates germs and bacteria, sterilizing the bowl.
• Auto Deodorization: Default setting is always ON. Activates when someone sits on the seat (detected by seat sensor). Turns off 1 minute after a person stands up if the sensor no longer detects them.
• Posterior/Rhythm: Press the button to operate posterior wash. Press again during use for pulsating (Rhythm) function.
• Feminine/Rhythm: Press the button to operate feminine wash. Press again during use for pulsating (Rhythm) function.
• Turbo Wash: Press the Turbo button for a powerful wash. It starts from the lowest water pressure.
• Water Temperature, Seat Temperature, Dry Temperature: Adjustable in 3 levels (Low, Mid, High). Temperatures are approximately: Water Temp: 36°C (97°F), 38°C (100°F), 40°C (104°F). Seat Temp: 36°C (97°F), 38°C (100°F), 40°C (104°F). Dry Temp: Room temperature - max 45°C (113°F).
• Nozzle Cleaning: Press the button to clean the nozzle.

Side Panel Functions:

• Power: Press the button for 3 seconds to turn off the bidet. Press the button to stop posterior, feminine, or dry functions.
• Power Saving: Press the [Stop] button on the side control panel once (without seating) to activate power save mode. Press again to turn off power save mode.
• Auto Deodorization on/off (for applicable models): Without a person seating on the seat, press the [Dry] button to turn the deodorization feature on/off.
• LED Light: Illuminates the toilet bowl with a warm glow.

Maintenance

Unplug the power cord when cleaning the filter.

Clean the Filter

1. Turn the water supply valve clockwise to stop water supply.
2. Release the bidet hose of the main body to separate the filter.
3. Clean the filter with a toothbrush or similar object.
4. Tighten the bidet hose onto the main body and turn the water supply valve counterclockwise to supply water.

Clean the Nozzle

The nozzle will extend out without spraying water. Use a soft brush or toothbrush to clean. Do not pull out or push the nozzle forcibly, as it may cause breakage or damage.

Troubleshooting

Power Supply

Posterior Wash, Feminine Wash, Turbo Wash Function

Heated Seat

Seat Sensor

Power Saving

Remote Control (VB-4000SE / VB-4100SR)

Additional Installation Guide

Adjustment method using gap plate between pottery (toilet) and seat

When there is a gap between the inside of the seat and pottery (toilet):

1. Place the catch plate as shown.
2. Combine the seat by pushing the plate.
3. Minimize the gap between the bidet and the tank, and install the seat backward.

When there is a gap between the outside of the seat and pottery (toilet):

1. Place the catch plate as shown.
2. Combine the seat by pushing the plate.
3. Install the seat as forward as possible.

Specifications

Limited Warranty

The product is warranted for one year according to the description written in this warranty.

Please submit the warranty form online at www.vovo-us.com.

Warranty Exclusions:

• Defects or malfunctions from failure to properly install, operate, or maintain the unit per the manual.
• Damage from abuse, fire, flood, freeze, electrical surges, lightning strikes, or other acts of nature.
• Damage from unauthorized alterations, attachments, or repairs.
• Improper installation for residential use.
• Damage from installing the unit in an environment with animals, mice, or insects.
• Damage caused by excess moisture or water clogging the water closet.
• Failure to install in accordance with applicable local codes, ordinances, and good trade practices.
• Color fading due to use in the wrong environment.
• Damage from consumable chemicals.
• Warranty coverage requires proof of purchase (original sales receipt).
• Damage from misuse due to not following the installation manual.

This warranty gives you specific legal rights. You may have other rights that vary by state, province, or country.

To obtain warranty repair service, contact VOVO service facility or call (888)601-0177 or email support@vovousa.com. Provide proof of purchase and a letter stating the problem.

WARNING: VOVO is not responsible for damage caused by chloramines in public water supply or cleaners containing chlorine (Calcium Hypochlorite).

Note: High concentrate chlorine or chlorine-related products can damage fittings, causing leakage and property damage.

This written warranty is the only warranty made by VOVO. VOVO is not responsible for loss of the product or for incidental, special, or consequential damages.

Contact Information

VOVO USA
377 Van Ness Way Suite 1205-1206, Torrance, CA 90501
Tel: +1.310.601.7798 | Fax: +1-424.399.5081
Customer Support: +1-888-601-0177

Factory
6173-21, Seodong-daero, Samjuk-myeon, Anseong-si, Gyeonggi-do, Republic of Korea
Tel: +82-31-672-0634, 0635 / Fax: +82-31-672-0630

Website: www.vovo-us.com