VOVO STYLEMENT Install Guide
Easily install the WATERJET bidet by yourself!
Note: Before the installation, please check the size of your toilet using the template first.
※ Do not use heavy duty tools and excessive power when tightening the connections.
※ Do not use Teflon tape when connecting the hose to the water supply valve and the bidet unit.
※ This product is water tested for quality check.
1. Separate water supply hose
Turn the water supply valve clockwise to lock, and separate the toilet hose using a spanner.
Diagram: Shows turning the water supply valve and using a spanner to disconnect the toilet hose.
2. Connect the T-valve to the toilet and toilet hose
Place the T-Connector between the toilet and the toilet hose.
Diagram: Illustrates connecting the T-Connector to the toilet hose and water supply valve.
3. Remove the existing toilet seat.
Unfasten the nut and remove the toilet seat.
Save the old toilet seat lid and nuts for reinstallation later.
Place the template on the toilet after removing the toilet seat cover.
Diagram: Shows removing the toilet seat and placing a template on the toilet.
4. Install the base bracket.
Place the fixing bolt on the base bracket.
Align the front of the bidet body and the front of the toilet before fastening the nuts.
Diagram: Depicts placing the fixing bolt, base bracket, and aligning with the toilet.
5. Install the bidet and secure the remote control holder
Slide the bidet and install it.
Secure the remote control holder to the wall with screws or peel off the double-sided tape sticker on the back of the remote control holder.
Diagram: Shows sliding the bidet into place and attaching the remote control holder.
6. Connect the hose and turn on the water
Connect the hose to the T-Connector and the bidet.
Turn the water supply valve counterclockwise to allow water flow.
Connect the outlet.
Open the water valve first and then plug-in the power.
Diagram: Illustrates connecting the hose to the bidet and turning on the water supply valve.
How to use
VB-3000SE, VB-3100SR
VB-6000SE, VB-6100SR
VB-4000SE/VB-4000N, VB-4100SR
STOP:POWER
Press the Stop button when you want to stop the function. When you press the Stop button for more than 3 seconds, the power will turn off. Press the Stop button again, the power will turn on.
Dry
Use this after using wash function. Wipe off the water with toilet paper before using dry function for pleasant using.
Auto Deodorization (VB-4000SE, VB-4100SR)
The default product setting is always ON on automatic deodorization. While someone sits on the seat (detects by the seat sensor) auto deodorization turns on and activates. If a person stands up after using the bidet (if it is not detected by the seat sensor), it will be turned off after 1 minute of operation.
Auto Deodorization on/off (VB-4000SE, VB-4100SR)
Without a person seating on the seat, the side panel has a feature of turning on/off using the dry button.
Water Pressure and Nozzle Position Adjustment
Water pressure and nozzle position can be adjusted in 5 levels.
Diagram: Shows a slider indicating levels from Low to High for water pressure and nozzle position.
LED Light (VB-3000SE, VB-3100SR)
The LED lamps illuminate the toilet bowl with a warm glow.
Posterior/Rhythm
Press Posterior/Rhythm button to operate washing function. Press Posterior/Rhythm button again during using this function. Rhythm (Pulsating) function will work.
Feminine/Rhythm
Press Feminine/Rhythm button to operate Feminine function. Press Feminine/Rhythm button again when during using this function, Rhythm (Pulsating) function will work.
Turbo Wash
Press Turbo button, Turbo wash will operate. It starts from the lowest water pressure.
Water Temperature, Seat Temperature, Dry Temperature
3 levels of Water Temperature / Seat Temperature / Dry Temperature.
Low: 97°F, Mid: 100°F, High: 104°F
It takes time to dry completely.
Nozzle Cleaning
You can clean the nozzle by pressing the Nozzle cleaning button.
UV LED Light (VB-6000SE, VB-6100SR, VB-4000SE, VB-4100SR)
UV LED eliminates germs and bacterias as well as sterilizing the bowl. When UV LED function is activated, UV LED will turn on and it will automatically turn off while seated.
Power Saving
Press the STOP button once on the side control panel of the product without seating to operate power save mode. Press the STOP button once more without seating to turn off the power save mode.
Diagram: Shows a control panel with buttons for Stop, Dry, Posterior Rhythm, Feminine Rhythm, Turbo Wash, Nozzle Position, Water Temp, Seat Temp, Dry Temp, UV LED, and Power Saving.
Thank you for purchasing VOVO product. We are here to help and improve your satisfaction. Please allow us the opportunity to assist you to maximize your satisfaction. If you have any questions, please contact us through live chat at www.vovo-us.com or send us an email at support@imunsen.com
