VOVO STYLEMENT User Manual
Models: TCB 090SA, TCB 090S, PB-707S, PB-101S, TC-090, TC-090W
To Our Customers
Thank you for choosing VOVO bidet. For your own safety, please read this user manual carefully. Please refer to this manual if you have any questions while in use. VOVO is not responsible for accidents resulting from user negligence. Product warranty is included in this manual; keep it safe.
Important Safety Instructions
When using electric appliances, especially with children present, basic safety precautions should always be followed.
READ ALL INSTRUCTIONS BEFORE USING
DANGER: As with most electric appliances, electrical parts are live even when the switch is off. To reduce the risk of death by electric shock:
- Do not use while bathing.
- Do not place or store the appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING: To reduce the risks of burns, electrocution, fire, or injury to persons:
- Close supervision is necessary when this appliance is used by, on, or near children or invalids.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- Use this appliance only for household use.
- Connect this product to a properly grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
Cautions for Safety
Read all instructions before installation and use. This manual contains important precautions and operating instructions for your own safety.
DANGER: The following points indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury.
This is an electric appliance. Do not install the product in a place where it is exposed to splash of water or humidity such as dew formation. When installing in a bathroom with a bathtub, install a ventilator to facilitate ventilation.
? [No damaged cord/plug] Do not use damaged cord, plug, and do not connect power while no water supply. It can cause short circuit, fire, or electric shock.
? [Handle cord carefully] Handle power cord carefully and do not bend or pull it forcibly. It can cause fire or electric shock. It can cause water leakage from the main body of piping.
? [No loose outlet] Do not use loose or unstable outlet and do not exceed the rated voltage of the outlet or the distributor. It can cause fire or electric shock.
? [No stepping on seat] Do not step on, shock, or place heavy objects on the seat, cover, or main body. You can hurt yourself. It can cause breakage or damage. It can cause water leakage through a broken toilet.
? [No spraying water on unit] Do not splash water or detergent on the main body or power plug. It can cause fire or electric shock.
✋ [Wet hands] Do not touch the power cord with wet hands. It can cause electric shock.
? [No fire near product] Do not place fire such as cigarette near the product. It can cause fire, electric shock, or injury.
?❌ [No disassembly] Do not open the product to repair or remodel. Only qualified service personnel should service this product. It can cause fire, electric shock, or malfunction.
⚠️ [Grounding] Make sure the product is properly grounded. If the product is not grounded, it can cause electric shock or electric leakage. For grounding work, consult an electric technician nearby.
? [No damaged cord/plug] Do not use damaged cord, plug, and do not connect power while no water supply. It can cause short circuit, fire or electric shock.
When installing the strainer, connect it tightly. Otherwise, it can cause water leakage. When water leaks, close the shutoff valve to stop water supply. (Turn the valve clockwise with screwdriver.)
? [No hand/clothing near outlet] Do not place hand or clothes on the warm air outlet. It can cause burn, electric shock, or fire.
Unplug the main power cable when you fix it. It can cause electric shock.
? [No industrial/graywater] Do not use industrial water or graywater for water supply. It can cause dermatitis. It can cause malfunction because of pollutant in water.
WARNING: The following points indicate dangerous situations where the user could suffer or sustain material damages if this product is used incorrectly.
? [Other purposes] Do not use for other purposes than reported in this manual.
? [No foreign objects in toilet] Do not throw anything else than a toilet paper in the toilet. Toilet can be clogged and it can cause the backflow of wastewater. Be careful not to drop anything into the toilet bowl.
? [No splash on nozzle/air vent] Make sure urine doesn't splash on to the nozzle and outlet of air vent. It can cause stinky odor and malfunction.
? [No harsh cleaners] When cleaning, use mild detergent with soft cloth and do not use the following: bathroom detergent, household detergent, benzene, paint thinner, nylon scrubber. It can cause breakage.
Unplug the main power cable when not using the product for a long time. It can cause malfunction.
There is concern in minor burns with heated seat. Anti-burning system will operate when the user is sitting on the seat for a long time. Turn off the seat temperature when the user is sitting on the seat for a long time. Turn off the seat temperature and dry temperature in the following cases:
- Children, Seniors, and People who can't control the product.
- Patients and disabled people.
- People who take sleeping pills or medicine.
- People who are drunk or exhausted.
Grounding Instructions
1. This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
DANGER: Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the product is properly grounded.
2. This product is for use on a nominal 120 V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The green colored rigid ear, lug, and the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by the screw.
3. If it is necessary to use an extension cord, use only a three wire extension cord that has a three-blade grounding plug, and a three-slot receptacle that will accept the plug on the product. Replace or repair a damaged cord.
4. This product is factory equipped with a specific electronic cord and plug to permit connection to a proper electronic circuit. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. Do not modify the plug provided; if not, it will not fit the outlet, have the proper outlet installed by a qualified electrician. If the product must be reconnected for use on a different type of electronic circuit, the reconnection should be made by qualified service personnel.
Figure 1 illustrates grounding components: (A) Grounded Outlet Box, (B) Adapter with Metal Screw, (C) Grounding Pin.
Names of Parts
TCB 090SA / TCB 090S
- Seat Cover: The lid of the toilet.
- Power Plug: Connects the unit to the electrical outlet.
- Main Body: The primary structure of the bidet toilet seat.
- Body Control Unit: Contains buttons for operation.
- ① Power Button: Powers the main unit ON / OFF.
- ② Posterior Button: Posterior function ON / OFF.
- ③ Feminine Button: Feminine function ON / OFF.
- ④ Flush Button: Operates the Flush function.
- Hidden Function: Power Save ON/OFF. Pressing the Power button for 3 seconds turns the bidet power off. Then, press the Feminine button to toggle the power save function. Finally, press the Power button to turn the bidet power on.
- Caution Label: Safety warning label.
- Heated Seat: Provides warmth to the seat.
- Seat Sensor: Detects user presence.
- UV LED Sterilization: Sterilizes the nozzle and bowl area.
- stainless nozzle: The nozzle for washing functions.
- Toilet: The ceramic toilet bowl.
- Remote Control Receiver: Receives signals from the remote control.
- Manual Flush Button: Button for flushing manually.
- Body Display Portion: Shows status like POWER and SAVE.
PB-707S / PB-101S
- Seat Cover: The lid of the toilet.
- Main Body: The primary structure of the bidet toilet seat.
- Power Plug: Connects the unit to the electrical outlet.
- Main Body Control Panel: Contains buttons for operation.
- ① Power Button: Powers the main unit ON / OFF.
- ② Posterior Button: Posterior function ON / OFF.
- ③ Feminine Button: Feminine function ON / OFF.
- ④ Flush Button: Operates the Flush function.
- Seat Sensor: Detects user presence.
- Nozzle: The nozzle for washing functions.
- Heated Seat: Provides warmth to the seat.
- Toilet: The ceramic toilet bowl.
- Remote Control Receiver: Receives signals from the remote control.
- Manual Flush Button: Button for flushing manually.
- Main Body Display Panel: Shows status like Power, Power Saving, Deodorant, Seat, Sensor.
TC-090 / TC-090W
- Seat Cover: The lid of the toilet.
- Power Plug: Connects the unit to the electrical outlet.
- Main Body: The primary structure of the bidet toilet seat.
- Seat Sensor: Detects user presence.
- Heated Seat: Provides warmth to the seat.
- Main Body Control Panel: Contains buttons for operation.
- ① Operation On/Off
- ② Seat temp On/Off
- ③ UV LED Sterilization On/Off
- ④ Flushing
- Toilet: The ceramic toilet bowl.
- UV LED Sterilization: Sterilizes the nozzle and bowl area.
- Remote Control Receiver: Receives signals from the remote control.
- Manual Flush Button: Button for flushing manually.
- Main Body Display Panel: Shows status like POWER, AUTO FLUSHING.
Installation Method
The images may differ from the actual products.
1. Cautions before Installation
Installation Space
- Secure enough installation space in the bathroom and check whether it disturbs the bathroom door.
- Secure water outlet at least 100mm away from the floor. It can cause discoloration of the wall.
- Check whether the water supply pipe and drain pipe are in the required position before installation.
Diagram shows floor, water supply, drain, and installation space with dimensions.
Water Pressure
- Minimum 1.5 kgf/cm² (0.15 MPa) water pressure is required. If the pressure is not secured, flushing may not work properly to discharge dirt.
- Even if other modifiers are used, it still requires more than the minimum required water pressure. The maximum water pressure is 7.5 kgf/cm² (0.75 MPa).
How to check the minimum water pressure: If you do not have a pressure meter, check the pressure as illustrated.
2. Accessories
① A type Installation Accessories
Includes: Remote control, Wall Mount, Conversion Nut, AA Batteries (x3), Screws (x2), Anchors (x2), Water Hose (Thin).
② B type Installation Accessories
Includes: Remote control, Wall Mount, Rubber Washer, Ring Plate, Water Shutoff Valve, Water Pipe, AA Batteries (x3), Screws (x2), Anchors (x2), Strainer Filter, Water Hose (Thick).
Installation
1. A type Installation Accessories
Attach the provided water hose to your water shutoff valve. You may need to use the included conversion nut to fit your water shutoff valve. Simply screw the conversion nut into the 1/2" side of the hose before connecting it to your water shutoff valve.
2. B type Installation Accessories
- Close the water gauge.
- Remove dust and sand in the water inlet when installing the shutoff valve.
- Wind Teflon tape around the water pipe.
- Connect the pipe with the shutoff valve.
- Connect the Strainer Filter.
3. Connect Hose
- Fix the hose to the flushing adapter first.
- Turn the nut clockwise to connect the hose.
4. How to install the Ceramic
Press firmly. Apply weight evenly. Do not move after placement, as the water-tight seal may break. A team of two people is recommended to correctly place the toilet base.
5. Connect Bidet to Toilet
- Assemble the toilet with bidet, jet spray outlet, and bowl washing outlet.
- Insert the hose into the filter.
- Insert bidet's fixing hook onto the toilet's fixing hook until it clicks.
Diagram shows A type and B type connections, including filter, fixing hook, bowl washing outlet, and jet spray outlet.
6. Connect Power
- Insert the power plug into the outlet.
- Press the Flush button. Water will fill the ceramic bowl.
Note: The water may overflow out of the rim when cleaning the bowl in regions with high water pressure. Using a screwdriver, turn the shutoff valve clockwise to reduce the water pressure.
Preparation and Check Before Use
1. Preparation
Place the battery into the remote control
Instructions and diagrams for placing batteries in remote controls for TCB 090SA/TCB 090S, PB-707S/PB-101S, and TC-090/TC-090W models are provided.
About the battery
- Observe the following to prevent breakage or leakage of fluid:
- Use the same type of batteries when replacing old batteries.
- Remove batteries when not used for a long time.
- Do not use rechargeable batteries.
- Sometimes settings (Temperature, Auto Flush) are initialized after replacing batteries; configure settings again.
2. Check if the power plug is connected
Advice 1: Turn off the power on the main body when replacing batteries or cleaning the product.
3. Adjust water flow with the shutoff valve
Turn the valve clockwise. If water pressure is too high, water may splash or overflow when flushing. Turn the water shutoff valve clockwise to reduce pressure.
4. Check
Check the display panel
Is the power indicator LED on? After plugging in the power plug, check the power indicator LED. If not on, press the Power button to turn on the device.
Diagrams show display panels for TCB 090SA/TCB 090S, TC-090/TC-090W, and PB-707S/PB-101S models.
Proper Usage
- Preserve the environment with power and water saving mode: Turn on power saving mode, adjust Water Temperature and Seat Temperature to a mild level.
- Turn off the power when not using the product for a long time: Press the 'Power' or 'Stop' button for 3 seconds to turn off the power.
- Close the seat cover: Close the seat cover to save power and keep the heat on the seat surface stable.
- Do not expose the product to direct sunlight: It can cause discoloration of the product, and the heat on the seat surface will become unstable.
- Drain off the water from the water tank when not using the product for a long time, or when moving the product to another place: It can cause water pollution and leakage during transportation.
Remote Control
TCB 090SA
<TOP> Functions
- Flush (Full. Small) Button: Press the flush button to activate the full or small flush.
- Seat Cover Opening/Closing: Press the seat cover button to automatically open and close the toilet seat cover.
- Seat Cover and Seat Closing: Press the close button to close both the toilet seat cover and toilet seat.
- Cover and Seat Opening: When you press the cover or toilet seat buttons, both the toilet seat cover and the toilet seat are automatically open and closed.
- Power Save On / OFF: In power save mode, water temperature and seat temperature are adjusted efficiently when not used for more than one hour. When the product is used again, the temperature returns to the original setting.
- Auto Deodorant ON / OFF: Press the deodorant button to remove the odor inside the bowl.
- Nozzle Cleaning: Press the nozzle cleaning button to clean the nozzle in a moving forward position.
<Front > Functions
- Stop: To stop the function being used, press the STOP button.
- Posterior/Rhythm: Performs Posterior wash (Back area of the body) by pushing the button once. Performs Rhythm function when pushed again while posterior function is on, providing a wide wash and pulsating massage effect with changing water pressure.
- Feminine/Rhythm: Performs Feminine wash (Frontal area of the body) by pushing the button once. Performs Rhythm function when pushed again while feminine function is on, providing a wide wash and pulsating massage effect with changing water pressure.
Function Details
- Position: The nozzle position can be adjusted in five steps.
- Turbo Wash: Press the Turbo Wash button to activate washing water spray from the nozzle.
- Pressure: Water pressure for Posterior wash, Feminine wash, and Turbo wash can be adjusted in five steps.
- Auto Lid Open / Close: When you stand in front of the toilet, the lid automatically opens, and when you move away, it automatically closes.
- Seat Temp: The toilet seat temperature can be adjusted in three steps.
- Dry: Dries water after using the posterior wash, feminine wash, and turbo wash functions.
- Water Temp: Water temperature for Posterior wash, Feminine wash, and Turbo wash can be adjusted in three steps.
- UV LED Light Sterilization ON / OFF (Option): Suppresses germs and viruses and sterilizes the inside of the pot.
- Dry Temp: The temperature of the drying function can be adjusted in three steps.
- Auto Flush ON/OFF: The seat sensor detects user's seating and flushes automatically, differentiating large and small flushes based on user's seated time (Less than 2 mins: small flush / More than 2 mins: large flush).
PB-707S / PB-101S
<TOP> Functions
- Flush (Full. Small) Button: Press the flush button to activate the full or small flush.
- Seat Cover and Seat Closing: Press the close button to close both the toilet seat cover and toilet seat.
- Cover and Seat Opening: Press the cover or toilet seat buttons to automatically open and close both.
- Seat Cover Opening/Closing: Press the seat cover button to automatically open and close the toilet seat cover.
- Deodorant ON / OFF: Press to remove odor inside the bowl.
- Nozzle Cleaning: Press to clean the nozzle in a moving forward position.
<Front > Functions
- Stop: Press to stop the current function.
- Posterior Wash: Performs Posterior wash (back area).
- Feminine Wash: Performs Feminine wash (front area).
- Turbo Wash: Activates washing water spray from the nozzle.
- Dry: Dries water after washing functions.
- Oscillating: Nozzle moves forward and backward.
- Pulsating: Repeats water pressure intensity from strong to weak.
- Rhythm: If 'Rhythm' button is pushed during Posterior or Feminine wash, the nozzle moves to wash a wide area and provides pulsating massage effect with changing water pressure.
- Power Saving ON / OFF: Activates/deactivates power saving mode. Saves unused time and electricity cost.
- Water Temp: Water temperature adjustable in three steps for Posterior, Feminine, and Turbo wash.
- Seat Temp: Seat temperature adjustable in three steps.
- Dry Temp: Drying function temperature adjustable in three steps.
- Auto Flush ON/OFF: Seat sensor detects seating and flushes automatically (small <2 mins, large >2 mins).
- Auto Lid Open / Close (PB-707S): Lid opens automatically when standing in front, closes when moving away.
TC-090 / TC-090W
- Remote Control Transmitter:
- Flush (Full. Small) Button: Press to activate full or small flush.
- UV LED Light Sterilization ON / OFF (Option): Suppresses germs and viruses, sterilizes the inside of the pot.
- Seat Temp: Seat temperature adjustable in three steps.
- Télécommande:
- Bouton (petite/grande) chasse d'eau: Press to activate small or large flush.
- Lumière LED UV Stèrilization marche/arrêt (Option): Suppresses germs and viruses, sterilizes the inside of the pot.
- Température du siège: Seat temperature adjustable in three steps.
How to Use
- Sit on the seat: The seat lamp will turn on. It operates after being occupied (Refer to page 8, seat sensor).
- Press the flush button on the remote control: Fills the toilet to an appropriate level (only for first-time installation).
- Washing Functions: Press Posterior/Rhythm, Feminine/Rhythm, or Turbo Wash buttons. Functions work for 1 minute each.
- How to use Turbo wash: Press Turbo wash, set water spray to the center of the anus, control water pressure. If water fills you up, push water out by forcing the abdomen. Pass motions and water in the rectum completely.
- Press Stop: Stops Posterior, Feminine, and Turbo wash operations.
- Press Dry: Works up to 3 minutes.
- Press Stop: (This appears to be a redundant instruction for stopping).
How to use it more comfortably
Comfortable 1 Oscillating
Press the button to wash. Press again to perform Oscillating function (nozzle moves). Press again to stop Oscillating.
Comfortable 2 Pulsating
Press the button to wash. Press again to perform Pulsating function (spray water rhythmically). Press again to stop Pulsating.
Comfortable 3 Rhythm
Press the button to wash. Press again to perform Rhythm function (nozzle moves for wide wash and pulsating massage). Press again to stop Rhythm.
Advice 1: Do not sit on the edge, but toward the inside of the seat. This lessens water splash in a proper position.
Advice 2: Comfortable functions do not work with Turbo wash. Turbo wash starts from the lowest water pressure.
Maintenance
Caution
Make sure that auto flush function is turned off. Please refer to the remote control/control panel pages.
Regular Maintenance
Maintaining the Main body, Seat and Lid.
- Wet a soft cloth: Clean with wet cloth.
- When toilet detergent is stained: Wipe it with soft wet cloth.
- When cleaning the bathroom floor: If there are spots of urine around the toilet, wipe it with wet towel.
- If the product is seriously contaminated: Wipe with soft cloth and mild detergent. Rough sponges, brushes make scratches on the surface of the product. Do not use the following detergents: Bath/toilet cleaning products, Mold removable products, Sink cleaning products, Bleach, Surfactant combined detergents.
Advice 1: Tankless is an electric appliance. Make sure water does not get into the product.
Advice 2: Keep the seat sensor, remote control transmitter, and receiver clean. If sensors are not clean, the product may malfunction or will not function at all.
Nozzle Cleaning
- Only the nozzle will extend out without spraying water.
- 1. Extend the nozzle: Press the nozzle cleaning button on the remote control. The nozzle will extend out.
- 2. Clean the nozzle: Use soft cloth or toothbrush to clean the nozzle. Do not pull out or push the nozzle by force; it may cause damage or break the nozzle.
- 3. Return the nozzle: Press the Nozzle cleaning button again. The nozzle returns to the original position. The nozzle will clean itself while it returns to the original position. Do not push the nozzle; it may cause damage or break the nozzle.
Troubleshooting
If you think the product is out of order, please refer to the following first. If the problem is still not solved, contact your local dealer or service center. Please unplug the power cord when requesting for repair service.
When the water leaks, close the shutoff valve and stop the water supply. Turn the handle right. [✅ Comply strictly]
Power supply
| Trouble | Possible Causes | Solution |
|---|---|---|
| The unit is not working. | Is the power out or is the circuit breaker off? | Wait until the power is restored. Or turn on the circuit breaker. |
| Is the operation lamp on the display panel of the main body off? | Turn on the power STOP in the control panel of the main body. |
Posterior wash, Feminine wash, Turbo Wash
| Trouble | Possible Causes | Solution |
|---|---|---|
| Water is not spraying out. | Is the water supply suspended? | Wait until the water supply is resumed. |
| Is the shutoff valve closed? | Open the valve. | |
| Is the human body out of the location of seat sensor? | Refer to the Seat Sensor part. | |
| Is the hose twisted? | Loosen the hose. | |
| Water pressure is weak. | Is the water pressure set to low level? | Adjust the water pressure to higher level. |
| Is the strainer clogged? | Clean the strainer. | |
| Water is cold. | Is the temperature set to a low level? Or is it turned off? | Adjust with Water temp on the remote control. |
| Is it in power saving mode? | The water temperature is set lower; the temperature goes up after sitting. | |
| Water stops in the middle of cleansing. | Press one of POSTERIOR / FEMINE / TURBO WASH buttons, then it will stop automatically in 1 minutes. | Press the POSTERIOR / FEMINE / TURBO WASH button again. |
| The water flows into toilet for a few seconds near the nozzle when sitting on the toilet. | Is the human body out of the location of seat sensor? | Refer to the location of Seat Sensor on page 8. |
| When the seat sensor is on, it releases some water before spraying. Or if you change position while seated, the sensor will turn on and off and release some water, it is not a malfunction. | - |
Heated Seat
| Trouble | Possible Causes | Solution |
|---|---|---|
| The seat is not warm. | Is the seat temperature set to low level? | Adjust seat temperature with Seat Temp buttons on the remote control. |
| Is it in power saving mode? | Sit on the seat and wait for about 5 minutes. | |
| The seat is cold. | The heater turns off automatically 1 hour after you sit on the seat. When you stand up, the heater will turn on again. | - |
Auto Flushing
| Trouble | Possible Causes | Solution |
|---|---|---|
| Auto flushing is not working. | Is the auto flushing turned off? (When off, the flushing indication on the remote control display panel is off) | Press auto flushing Auto flush button on the remote control again to turn it on. |
Seat Sensor
| Trouble | Possible Causes | Solution |
|---|---|---|
| The posterior wash or deodorant function works without sitting on the seat. | Is the seat sensor blocked with wet towel? | Remove the wet towel. |
| Is the seat sensor wet? | Wipe out the water with dry cloth. |
Deodorization
| Trouble | Possible Causes | Solution |
|---|---|---|
| Deodorization is not working at all. | Is the human body out of the location of seat sensor? | Refer to the location of Seat Sensor on page 8. |
| Is the lamp on the main body on? | Set the deodorant function. |
Power Saving
| Trouble | Possible Causes | Solution |
|---|---|---|
| Power saving is not working. | Is it unplugged? | Reset the setting by pushing the power saving button from the control panel. |
| Didn't you change batteries? | - |
Remote Control
| Trouble | Possible Causes | Solution |
|---|---|---|
| Remote control is not working. | Are the batteries running low? | Replace old batteries with new ones. |
| Are the polarities of batteries misplaced? | Insert batteries in order. | |
| Are the transmitter, receiver of the remote control blocked? | Remove the objects blocking transmitters. | |
| Are the transmitter, receiver of the remote control contaminated? | Wipe out the dust or water stain. | |
| Is human body out of the location of seat sensor? | Refer to the location of seat sensor on page 8. |
Drying
| Trouble | Possible Causes | Solution |
|---|---|---|
| Drying air temperature is low. | Is the air temperature set to a low level? | Adjust the air temperature with Dry Temp buttons on the remote control. |
| The air blow stops in progress. | Press DRY then it will stop automatically after 3 minutes. | Press DRY again. |
| The warm air drying function is not working at all. | It may stop if user changes his position while sitting. | Refer to the location of Seat Sensor on page 8. |
| Is the human body out of the location of seat sensor? | Refer to the location of Seat Sensor on page 8. |
Flushing by Remote Control
| Trouble | Possible Causes | Solution |
|---|---|---|
| I can't flush the toilet with remote control. | Are the batteries running low? | Replace old batteries with new ones. |
| Did you press the button consecutively? | This function cannot be used consecutively. You will need to wait for about 10 seconds for next flush. | |
| Are the transmitter areas of remote control contaminated? | Clean the dust or water stain. |
Others
| Trouble | Possible Causes | Solution |
|---|---|---|
| The soil is not completely flushed down. | Is the shutoff valve opened enough? | Open the shutoff valve sufficiently. |
| Is the strainer in the shutoff valve clogged? | Clean the strainer. | |
| Are you using water in other places than the bathroom? | - | |
| The flushing water is not supplied. | Is the shutoff valve closed? | Open the shutoff valve sufficiently. |
| Is the water supply suspended? | Wait until the water supply is resumed. | |
| Water is leaking from the pipe joint. | Is the screw on the joint loosened? | Tighten the screw with a screwdriver. |
Customer Support
Limited Warranty
This manual includes the Warranty. Please complete the appropriate information (distributor, installation date) and read the Warranty carefully. The warranty period is 1 year from purchase date.
Minimum storage period of replacement parts for repair use
The minimum storage period of replacement parts for repair is 6 years from the completion of manufacture.
In case of requesting for repair under warranty
Please read the manual carefully again, and if there are still troubles, contact your local dealer or service center. Please submit the warranty card when requesting for repair service.
Information needed when requesting for repair
- Address, name, telephone No.
- Desired date for repairer's visit
- Product name
- Serial Number
- Installation Date
- Purchase date
Detail of Repair Charge (When requesting for customer service)
The repair cost means [Technical Support Fee] + [Part Cost] + [Traveling Expenses]. [Technical Support Fee] is required for diagnosis, repair, replacement or adjustment of parts. [Part Cost] is the cost of the parts used for repair. [Traveling Expenses] is required when dispatching certified technician to the location of the product.
Specifications
TCB 090SA, TCB 090S, PB-707S, PB-101S
| Model No. | TCB 090SA | TCB 090S | PB-707S | PB-101S |
|---|---|---|---|---|
| Rated Voltage | 120V~, 60Hz | |||
| Rated Power Consumption | 703W | |||
| Power Cord Length | 1.2m (4ft) | |||
| Water Consumption | Full flush: 6L (1.6GPF) / Small flush: 4L (1.0GPF) | |||
| Flushing System | Siphon jet, Tornado flushing | |||
| Posterior Wash | Max 540cc/min | Max 900cc/min | ||
| Feminine Wash | Max 1100cc/min | Max 1000cc/min | ||
| Turbo Wash | Max 640cc/min | Max 700cc/min | ||
| Water Temperature | Adjustable, 34℃ ~ 40℃ / 93.2°F ~ 104°F | |||
| Water Tank | 1200cc | 1500cc | ||
| Heater Capacity | 600W | |||
| Safety Device | Thermal cutoff, Overheating prevention circuit, Temperature sensor | |||
| Seat Temperature | Adjustable, 34℃ ~ 40℃ / 93.2°F ~ 104°F | |||
| Heater Capacity | 55W | |||
| Safety Device | Thermal cutoff, Temperature sensor | |||
| Hot Air Temperature | Adjustable, 40℃ ~ 59℃ / 104°F ~ 138.2°F | |||
| Safety Device | 250W | |||
| Heater Capacity | Thermal cutoff, Temperature overheat preventer (manual recovery bimetal) | |||
| UV LED Light Sterilization | UV LED Light Sterilization (Option) | |||
| Auto Lid | Auto Lid | Auto Lid | ||
| Water Pressure | Min: 1.5kgf/cm²(0.15Mpa,21.3 psi), Max: 7.5kgf/cm²(0.75Mpa,106.6psi) | |||
| Waterproof Rating | IPX4(Seat) | |||
| Inlet Water Temperature | 5℃~35℃ / 41°F ~ 95°F | |||
| Ambient Temperature | 5℃~40℃ / 41°F ~ 104°F | |||
| Dimension | W 410 mm x L 725 mm x H 525mm / W 16.1 in X L 28.5 in X H 20.6 in | W 410 mm X L 720 mm X H 570 mm / W 16.1 in X L 28.3 in X H 22.4 in | ||
| Weight | 43 kg [Bidet 9 kg, Toilet 35 kg] / 97lb [Bidet 19.8lb, Toilet 77.16lb] | 48 kg [Bidet 8 kg, Toilet 35 kg] / 94.7lb [Bidet 17.63lb, Toilet 77.16lb] | 47 kg [Bidet 13kg, Toilet 35 kg] / 105.82lb [Bidet 28.66lb, Toilet 77.16lb] | |
TC-090 / TC-090W
| Model No. | TC-090 / TC-090W | |
|---|---|---|
| Rated Power | AC 120V, 60Hz, 65W | |
| Power Cord Length | 1.2m (4ft) | |
| Water Consumption | Full flush: 6L(1.6GPF) / Small flush : 4L(1.0GPF) | |
| Flushing System | Siphon jet, Tornado flushing | |
| Seat Temperature | Adjustable, 34 °C ~ 40 °C / 93.2°F ~ 104°F | |
| Heater Capacity | 55 W | |
| Safety Device | Thermal cutoff, Temperature sensor | |
| UV LED Light Sterilization | UV LED Light Sterilization | |
| Water Pressure | Min: 1.5kgf/cm²(0.15Mpa,21.3 psi), Max: 7.5kgf/cm²(0.75Mpa,106.6psi) | |
| Inlet water Temperature | 5 ℃ ~ 35 ℃ / 41°F ~ 95°F | |
| Ambient Temperature | 5 ℃ ~ 40 ℃ / 41°F ~ 95°F | |
| Dimension | W 410 mm x L 720 mm x H 525 mm / W 16.1 in X L 28.3 in X H 21 in | |
| Weight | 40kg [Bidet 5 kg, Toilet 35 kg] / 97bls [Bidet 19.8bls, Toilet 77.16bls] | |
⚠️ [WEEE Directive] This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Limited Warranty
The product is warranted for One year with upper seat and three years with ceramic toilet bowl according to the description written on this warranty. Please submit this warranty card to local dealer or service center.
Model:
Purchaser:
Company:
Address:
City:
Country:
Phone:
Fax:
E-mail:
Dealer(Company):
Address:
Installation Date:
Warranty period: 1 year from purchase date for upper seat, 3 years from purchase date for ceramic toilet bowl.
Complete the above warranty card when purchasing the product. Check the information and keep it safe.
Pay Repair Regulations
- Defects and/or malfunctions from failure to properly install, operate and/or maintain the unit in accordance with the installation manual.
- Damage from abuse, fire, flood, freeze, and any other acts of nature.
- Damage resulting from unauthorized alterations, attachments and/or repairs.
- If the product was not installed properly for residential use.
- Damage from installing the unit in an environment with animals, mice or insects.
- Damage caused by excess moisture or from water clogging the water closet.
- Damage from not being installed in accordance with all applicable local codes, ordinances and good trade practices.
- Color fading due to use in wrong environments.
- Damage from consumable chemicals.
- The warranty will not be covered without providing the date of purchase with original receipt.
- Damage from misuse due to not following the installation manual.
