Hand Therapy Heat Massager G608

Instructions for Use

v002: 21/04/21

Technical Details

Rated output: 5VDC, 2A

Charging time: approx. 3 hours

Important

For best results, the massager needs to be fully charged. Also ensure your hand is in the correct position.

Safety Instructions

⚠️ This symbol is used to alert users to a specific operating procedure that must not be performed.

? This symbol is used to alert user to a specific operating procedure that must be followed in order to operate the unit safely.

Do not use in a way exceeding the rating of the household outlet or wiring. Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating.

Pregnant women should not use this appliance. Hormone imbalance may cause skin problems.

Explanation of Symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

SymbolDescription
▲ DANGERDenotes a potential hazard that will result in serious injury or death.
▲ WARNINGDenotes a potential hazard that could result in serious injury or death.
▲ CAUTIONDenotes a hazard that could result in minor injury.

The following symbols are used to classify and describe the type of instructions to be observed.

Further Safety Warnings

▲ WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance. -Otherwise it may cause an accident or injury.

The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped. -Otherwise it may cause an accident or injury.

Regularly clean the power plug and the appliance plug to prevent dust from accumulating. - Otherwise it may cause fire due to insulation failure caused by humidity.

Disconnect the adaptor and wipe with a dry cloth.

Properly dispose the package of the appliance, keep the package away from infants. -Otherwise it may cause suffocation of infants from happening.

▲ CAUTION

Do not wrap the cord tightly around the adaptor when storing. -Otherwise it may cause the wire in the cord to break with the load, and may cause fire due to a short circuit.

Do not allow pins or trash to adhere to the power plug or the appliance plug. - Otherwise it may cause electric shock or fire due to a short circuit.

Do not engage in any other activities while wearing the main unit. - Otherwise it may lead to unexpected accidents.

Do not drop or subject to shock. - Otherwise it may cause injury.

Disconnect the adaptor from the household outlet when not charging. - Otherwise it may cause electric shock or fire due to electrical leakage resulting from insulation deterioration.

Disconnect the adaptor or the appliance plug by holding onto the adaptor or appliance plug instead of the cord. - Disconnecting by holding onto the cord may cause electric shock or injury.

▲ CAUTION

The appliance should be cleaned to avoid the build up of grease and other residues.

The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.

Do not lie or sit down on the massager.

Do not cause impact to the massager.

Do not cover yourself with a blanket or quilt while using the massager.

Do not use while sleeping.

Part Name

The parts of the Hand Therapy Heat Massager G608 are:

Before Using the Unit

ATTENTION

Please check the massager's fabric cover for damage or tear before use. Do not use it if the fabric is torn.

Please ensure that the operation buttons are functional.

If you have not used the unit for some time, please read the instruction manual carefully again, make sure the machine is working normally.

Visual Check: Inner cover of massager. Please check if the fabric cover is damaged.

How to Recharge

  1. Connect the power adapter interface and products.
  2. Plug the power adapter charging head into the socket. To prevent electric shock, please plug into the socket accurately and safely.
    • Start charging, the power button flashes red.
    • A full charging takes about 3 hours for a completely discharged battery.
  3. Check if the charging light is on.
    • The battery may discharge automatically if it's idle for a long time.
    • You can use the massager with any functions during the device is being charged.

Charging Indicator Status:

It is fully charged in about 3 hours and can be used for about 1.5 hours.

If there is still some electricity left in the battery, the charging time will be shortened accordingly.

Charging method is different, but usually can be charged about 200 times.

If it is charged in a high temperature environment, the product protection device will work and the charging may stop halfway.

4. When charging is completed, please disconnect the power adapter and charging plug.

How to Use

ATTENTION

Please use the slightly lower level massage function when starting up the appliance. Stop using it if you feel anything abnormal.

5. Insert your hand into the product

Open your palm and put into the appliance, place your thumb and other four fingers as shown in the images.

Visual Description: Hand with four fingers positioned outside the front opening, and the thumb inside the device. Then, the hand is shown fully inserted.

Usage Examples: Left hand, Right hand.

Do not pull out your hand during use. Please turn off the appliance by pressing the power button if in emergency.

Button Functions:

6. Press the power to start massage

Power Button: Press the power button to start the air pressure-weak timing for 10 minutes. Other function buttons can be optional. Turn off the appliance by pressing the power button once more.

The light of the power button: Green light on when fully charged. Green light flashes slowly in low battery condition.

When the product is power on, press the other buttons to select the function you need.

Function Selection Flow: Press (Green Light) ➡️ Air pressure intensity (3 level optional) ➡️ Heat LED (white light) OR Vibration LED (white light). Another Press button is available below Air Pressure Intensity.

Air Pressure Intensity Button

Press this button to switch among weak > medium > strong mode in turn during the massage.

Intensity Levels: Weak (1 light), Medium (2 lights), Strong (3 lights). Each level is indicated by the number of lights illuminated. Press the button to cycle through the levels.

Heat Function

Press the heating button in the power on state to switch between (Heating turn on) ⬅️➡️ (Heating turn off).

Heat Status: ON -> Turn on Heat (white light) -> Turn off Heat (light off). Press the button to toggle.

Vibration Button

Press the vibrating button in the power on state to switch between (Vibrating turn on) ⬅️➡️ (Vibrating turn off).

Vibration Status: ON -> Turn on Vibration (white light) -> Turn off Vibration (light off). Press the button to toggle.

Before the product is turned on, other buttons are invalid, and it will shut off automatically when time is up.

The working time is 10 minutes when the product is turned on.

Removing the Built-In Rechargeable Battery

This product uses a rechargeable lithium-ion battery. Remove the built-in rechargeable battery before disposing of this product.

WARNING

Do not disassemble unless the product is discarded.

How to Remove the Battery

The following breakdown drawings are used for discarding product, not for repairing.

  1. Remove the AC adapter and press the power button to check if it works. If the battery still supports the appliance working, operate till the power off.
  2. Turn the product over and remove the 4 rubber feet and 4 rubber caps which covering the screws. Visual Description: The underside of the massager is shown with rubber feet and caps removed, revealing screw holes.
  3. Use a screwdriver to remove the screws (5 pieces on each side). Visual Description: Screws are shown being removed from the casing.
  4. Turn the product over, follow along the battery cable and find the cable terminal, then unplug it.
  5. Remove the battery. Visual Description: The battery is shown being disconnected from its terminal and removed from the unit.
Note: Be sure to remove the power adapter from the product before disassembling. Please keep the battery away from short-circuit carefully.

Troubleshooting

ProblemPossible CauseAction
The appliance does not operate even the "power" switch is pressed.The main unit and AC adaptor are connected to a household outlet.
It is not charged
The "power" switch is not firmly pressed.
Remove the AC adaptor from the main unit.
Recharge with the AC adaptor. (See page 7.)
Press the "power" button firmly to its place.
The charging indicator lamp does not go on/goes out.The appliance is fully charged. This does not indicate a problem. (See page 7.)
The adaptor is not properly inserted into the household outlet.
The appliance plug is not firmly inserted into the appliance socket.
Properly insert the adaptor into the household outlet.
Firmly insert the appliance plug into the appliance socket.
The appliance can be used only for a few minutes even after charging it.Battery life is exhausted (approximately 5 years).Consult a retailer or an authorized service center. (Do not change the battery yourself. Doing so may damage the appliance.)
The adaptor is abnormally hot.It is loosely inserted into the household outlet.Use a household outlet that is not loose.
The main unit does not heat up.The appliance may not work beyond the recommended temperature.Use under the recommended temperature of 15 °C - 35 °C.
The appliance stops during use.The battery has run down.
The appliance automatically stops after approximately 10 minutes. This does not indicate a problem.
Recharge with the AC adaptor.

How to Clean

Cleaning

Before you clean, please make sure the power is switched off, and the power plug has been pulled out from the socket. Please use a dry cloth to clean the product.

Maintenance

Keep the product clean and far from the wet environment.

Clean when you feel cleaning is necessary.

Cleaning the main unit

BATTERIES

Plug Wiring (UK & IRELAND)

This appliance is supplied with a mains adaptor/charger with BS1363 plug pins.

DO NOT use if the socket outlets in your home or office are not suitable for this product's mains adaptor/charger plug pins. Attempts to insert the mains adaptor/charger into the wrong socket is likely to cause electric hazard or damage.

DO NOT use with any other mains transformer/charger than the one that is supplied with this product.

Disposal

CE ♻️

Contact Information:

Head Office, 11 Bridge Street, Bishop's Stortford CM23 2JU

Tel: 0844 482 4400*

Fax: 01279 756 595

www.coopersofstortford.co.uk

*Calls cost 7 pence per minute plus your telephone company's network access charge

Models: G608, Hand Therapy Heat Massager G

File Info : application/pdf, 19 Pages, 772.95KB

PDF preview unavailable. Download the PDF instead.

G608i Microsoft Word for Microsoft 365

Related Documents

Preview Rechargeable Neck Therapy Massager H603 - User Instructions
Comprehensive instructions for the Rechargeable Neck Therapy Massager H603, covering features, operation, care, and disposal. Features ergonomic design, wireless controller, heating, vibration, and magnetic therapy.
Preview Heated Vibration Massager K769 - User Instructions and Safety Guide
Comprehensive instructions and safety guidelines for the Coopers of Stortford Heated Vibration Massager K769, covering operation, features, and important precautions.
Preview Heat Therapy Knee Wrap G606: Instructions for Use and Features
Comprehensive instructions and features for the Coopers of Stortford Heat Therapy Knee Wrap G606, detailing its use, temperature settings, care, and benefits for pain relief and recovery.
Preview H600 WH Knee Massager Instructions for Use
Comprehensive instructions for the H600 WH Knee Massager, detailing its features, operation, and disposal. Includes information on vibration modes, heating levels, infrared and laser functions, and ergonomic design.
Preview Coopers of Stortford Soup Maker 10451: Instructions for Use
Comprehensive instructions for the Coopers of Stortford Soup Maker 10451, covering safety warnings, product overview, operation, features, troubleshooting, and recipes.
Preview Lightweight Carpet Cleaner K044 - Instructions for Use
Comprehensive instructions for the Coopers of Stortford Lightweight Carpet Cleaner K044, covering assembly, operation, maintenance, and troubleshooting.
Preview Coopers of Stortford Cross Cutter Shredder 11254: Instructions for Use and Safety Guide
Comprehensive instructions for the Coopers of Stortford Cross Cutter Shredder 11254, covering setup, operation, safety precautions, maintenance, troubleshooting, disposal, and declaration of conformity.
Preview 7000 BTU Air Conditioner G393 User Manual
Comprehensive user manual for the Coopers of Stortford 7000 BTU Air Conditioner, model G393. This guide provides detailed instructions on safety, operation, installation, maintenance, and troubleshooting for optimal use.