8-Key Battery Powered Wall Switch (WP1018)
Model: WP1018
Product Overview
The Keilton WP1018 is an 8-key, battery-powered wall switch designed for use with the Keilton lighting control system. It offers convenient control over lighting and scenes within your smart home environment.
Installation Instructions
Battery Installation
- Carefully pry open the back cover of the remote switch using a flat screwdriver.
- Replace the existing battery with a new CR2032 battery. (Note: The battery is designed to last approximately 5 years with usage of twice per day).
- Attach the cover securely.
Bracket Installation
- Attach the mounting bracket to the wall using the supplied self-tapping screws.
- Slide the remote switch unit into the installed bracket until it is firmly seated.
Wall Surface Installation
Note: The wallplate (WP) needs to be purchased separately.
- Carefully remove the existing cover plate from the wall.
- Mark the desired position for the new switch on the wall.
- Drill two holes at the marked positions using a power drill.
- Attach the mounting bracket to the wall using the supplied self-tapping screws.
- Slide the remote switch into the bracket.
- Attach the wallplate to complete the installation.
Pairing and App Control
This device is compatible with the Keilton lighting control system only.
Entering Pairing Mode
Simultaneously press and hold the "DIM+" and "ON" buttons for two seconds to enter pairing mode.
Using the Keilton App
- Open the Keilton App and navigate to the "Switch" page.
- Click the option to add a new switch.
- Select the specific light or light group you wish to control with this switch.
- Assign up to 4 scenes to be controlled by this switch.
Keilton App Download
To download the Keilton App:
- For iOS devices, scan the QR code [Scan QR code to download on App Store].
- For Android devices, scan the QR code [Scan QR code to download on Google Play].
For detailed instructions on using the Keilton App, scan the QR code [Scan QR code for Keilton App instruction].
Warranty Information
Keilton warrants this product to be free of defects in materials and workmanship for a period of five (5) years. This warranty does not cover consequential damages arising out of, or in connection with, the use or performance of this product, or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation.
For support, please contact: sales@litetrace.com
Compliance Information
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- (1) This device may not cause interference.
- (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes :
- (1) Cet appareil ne doit pas causer d'interférences.
- (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.
