Anker SOLIX PS400 Portable Solar Panel (400W)

Using Your Product

1. Unfold the Anker SOLIX PS400 Portable Solar Panel and its stand. For maximum charge, adjust the solar panel up to 3 angles and align it directly under the sun.
[Diagram Description: The solar panel is shown unfolded with an adjustable stand, indicating three possible angles for optimal sun alignment.]

2. Charge your portable power station with the included MC4 to XT-60 solar charging cable.
[Diagram Description: The MC4 to XT-60 solar charging cable is shown connecting the solar panel to a portable power station.]

Important Notes

• Anker SOLIX PS400 Portable Solar Panel cannot store electricity. A portable power station is required to store power.
• Charging efficiency is subject to sunlight intensity.
• Keep your portable power station away from direct sunlight. Excessive heat may cause damage.
• 400W refers to the power of the solar panel, which is not equal to the actual power of the output ports. There will be some power loss when solar energy is transferred into electrical energy, so the actual power of the output ports will be less than the power of the solar panel.

Specifications

Important Safety Instructions

• [handle-with-care] Avoid dropping.
• [no-disassembly] Do not disassemble.
• For the safest and fastest charge, use original or certified cables.
• [no-open-flames] Open flame sources, such as candles, must not be placed on this product.
• [cleaning-instructions] Only use a dry cloth or brush to clean this product.

Waste Electrical and Electronic Equipment (WEEE)

This symbol [recycle-symbol] means that according to local laws and regulations, your product and/or its battery should be disposed of separately from household waste. When this product reaches the end of its life, the user has the option of handing it over to a competent recycling organization. Proper recycling of your product will protect human health and the environment.

Regulatory Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:(1) Reorient or relocate the receiving antenna.(2) Increase the separation between the equipment and receiver.(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.(4) Consult the dealer or an experienced radio/TV technician for help.The following importer is the responsible party: Fantasia Trading LLC, 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764, Telephone: +1-800-988-7973.

IC Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

CE Declaration of Conformity

Anker Innovations Limited declares that this product is in compliance with Directives 2014/35/EU & 2014/30/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at: https://www.anker.com.
EU Importer: Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3, 80807 Munich, Germany.

UK Declaration of Conformity

Anker Innovations Limited declares that the product type A2433 is in compliance with Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at: https://www.anker.com.
UK Importer: Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom.

Customer Service and Support

For detailed warranty information and customer support, please refer to the following:

Warranty

24-Month limited warranty.
(Note: Applicable consumer rights remain unaffected.)

Technical Support

Lifetime technical support.

Contact Information:

• Email: support@anker.com
• Email (Middle East and Africa Only): support.mea@anker.com
• US/CA: [phone-icon] +1 (800) 988 7973
• UK: [phone-icon] +44 (0) 1604 936400
• DE: [phone-icon] +49 (0) 69 9579 7960
• Middle East & Africa: [phone-icon] +971 42428633
• UAE: [phone-icon] +971 8000320817
• KSA: [phone-icon] +966 8008500030
• Kuwait: [phone-icon] +965 22069086
• Egypt: [phone-icon] +20 8000000826
• AU: [phone-icon] +61 3 8331 4800
• TR: [phone-icon] +90 0850 460 14 14
• RU: [phone-icon] +8 (800) 511-86-23
• India: [phone-icon] +91 18003138831
• CN: [phone-icon] +86 400 0550 036
• JP: [phone-icon] +81 03 4455 7823
• KR: [phone-icon] +82 02-1670-7028

For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com

Social Media:
[social-media-icon] @anker_official, [social-media-icon] @ankerJp, [social-media-icon] @AnkerDeutschland, [social-media-icon] @AnkerJapan, [social-media-icon] @Anker
[social-media-icon] @AnkerOfflc1al, [social-media-icon] @Anker_JP