OPERATING INSTRUCTIONS
PROSCAN
50" LED TV
PLDED5066A-C
ENERGY PERFORMANCE VERIFIED
Contents
Safety and Warnings
IMPORTANT SAFETY INSTRUCTION
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient practices.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this Television near water.
- Clean only with dry cloth.
- Do not block any ventilation openings, install in accordance with the instructions.
- Do not install near any heat sources such as radiations, heat registers, stoves, or other Television (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the Television.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this Television during lighting storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the Television has been damaged in any way, such as; power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Television, the Television has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the Television.
- Attention should be drawn to the environmental aspects of battery disposal.
- The use of Television in moderate climate.
- The Television shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the Television.
CAUTION: RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
[⚡ Electric Shock Symbol] The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.
[ℹ️ Information Symbol] The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this Television to rain or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: The excessive sound pressure from earphones and headphones can cause hearing loss.
[? Double Insulation Symbol] This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.
[♻️ Recycling Symbol] This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
High voltages are used in the operation of this television receiver. Do not open the cabinet. Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or its stand. Pay special attention to children. Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual and/or damage to the television may result if it falls.
Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Do not block the ventilation holes on the back cover of the TV. Adequate ventilation is essential to prevent failure of electrical components.
Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on or near the television.
Do not trap the power supply cord under the television receiver's stand.
If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the life of your television, and can also be dangerous. Minimum distances are recommended: 20cm, 10cm, 10cm, 5cm.
Introduction
Main features
- Integrated ATSC TV tuner for HDTV broadcast reception
- High brightness provides a vivid and brilliant picture
- High dynamic contrast ratio for deeper blacks and brighter whites
- Wide Screen aspect ratio (16:9) for a complete home theater experience
- HDMI input for true digital connection
- VGA port for connection to PC
- Integrated Built-in stereo speaker system
- Full-function remote control
This product's default mode (standard mode) already passes the Energy Star test. If the TV set is in another mode, energy consumption may increase beyond the limits required for ENERGY STAR qualification.
Accessories
- Infrared Remote Control: 1
- User's Manual: 1
- Battery(AAA): 2
Main parameter
| Parameter | Value |
|---|---|
| Viewing Picture Size (diagonal) | 50 inches |
| Resolution | 1920x1080 |
| Power consumption | 120W |
| Audio Output Power (THD ≤ 7%) | 2x8W |
| Input Power Voltage | AC 100-240V 50/60Hz |
| Aspect Ratio | 16:9 |
| TV System | ATSC Digital system and NTSC Analog system |
| Video Signal System | NTSC |
| Receiving Channel | Cable: 1-135 / Air: 2-69 (ATV&DTV) |
| High-Definition Multimedia Interface (HDMI) Input | x 2 |
| YCb(Pb)Cr(Pr) Input | x 1 |
| Composite Video Input | x 1 |
| Analog RGB (VGA) Input | x 1 |
| Audio Input | x 2 |
| Headphone Output | x 1 |
| Coaxial Output | x 1 |
| USB Input | x 1 |
| Horizontal definition (TV line) | Composite Video Input ≥350, Video Input ≥400, YCb(Pb)Cr(Pr) ≥400 |
Stand Installation Guide
- Place the TV with the display side down on a flat surface. Use a cloth to protect the display. Position the base stand onto the bottom of the stand neck.
- Attach the base stand to the stand neck firmly tightening the supplied screws. (Screws: 4pcs, 4x43PWM for step 1; 4pcs, 4x8PWB for step 2)
Wall Mount
Instruction for Wall Mount
A wall mount kit (purchased separately) would allow you to mount your PROSCAN TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation.
Dimensions for Mounting Hole Pattern
Diagram shows the rear of the TV with mounting hole pattern dimensions: 200mm x 200mm.
- This PROSCAN TV is compatible with a 200mm x 200mm mounting hole pattern.
- 4 pcs of type M6 screws are required for installing the wall mount bracket to your PROSCAN TV. Do not use screws that are longer than 10 mm. Screws that are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight, as this may damage the TV or cause the TV to fall, resulting in personal injury. PROSCAN is not liable for these kinds of incidents.
- Do not mount your PROSCAN TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Installation
Front panel
Diagram shows the front of the TV with labels for remote control sensor, indicator LED, and panel keys.
Panel keys
Diagram shows the top panel keys with numbers 1-5 and labels: SOURCE, MENU, CH+/CH-, VOL+/VOL-, STANDBY.
- SOURCE: Display the input source menu.
- MENU: Display main MENU.
- CH+/CH-: In TV mode, press "CH+" or "CH-" to change the channel up and down. In MENU mode, press "CH+" or "CH-" to select items. In standby mode, press "CH+" or "CH-" to turn on the TV.
- VOL+/VOL-: Adjust sound level. In MENU mode, press "VOL+" or "VOL-" to adjust the item that you selected.
- STANDBY: Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
REAR Connections
Diagram shows the rear panel with connection ports labeled: AC-INPUT, AV, L, R, Y, Pb, Pr.
All the terminals are (from left to right): POWER SOCKET, AV, AUDIO INPUT, YPbPr (COMPONENT) INPUT. Note: AV and YPbPr share the same audio input.
SIDE Connections
Diagram shows the side panel with connection ports labeled: HDMI1, HDMI2, USB, VGA, PC AUDIO, HEADPHONE, COAXIAL, RF.
All the terminals are (from left to right): HDMI1, HDMI2, USB, VGA, PC AUDIO, HEADPHONE, COAXIAL, RF. Note: When HDMI has an input signal coming from a DVI source then the audio input signal must be connected to the PC audio input.
ANTENNA
Diagram shows the rear of the TV with antenna connection port. An outdoor antenna and an indoor antenna setup are illustrated. Text indicates 'Plug', 'ANT 75Ω', 'TWIN-LEAD FEEDER (300Ω)', 'Adaptor (NOT SUPPLIED)'.
Note: Aerial connections: IEC (female). Input impedance: 75Ω unbalanced.
PC
STEPS:
- It is recommended that the TV and computer are off before making any of the connections.
- Connect the VGA and audio cable.
- Connect the power cord.
- Power on the TV, switch to PC mode.
- Power on the PC.
Diagram shows connections between a PC and the TV using VGA and audio cables. The TV's rear and side ports are shown, along with corresponding PC ports.
PC PRESET MODE
| # | RESOLUTION | V.Freq.(Hz) | H.Freq.(KHz) |
|---|---|---|---|
| 1 | 720*400 | 70 | 31.47 |
| 2 | 640*480 | 60 | 31.47 |
| 3 | 640*480 | 75 | 37.50 |
| 4 | 800*600 | 60 | 37.88 |
| 5 | 800*600 | 75 | 46.88 |
| 6 | 1024*768 | 60 | 48.36 |
| 7 | 1024*768 | 70 | 56.48 |
| 8 | 1024*768 | 75 | 60.02 |
| 9 | 1280*768 | 60 | 47.3 |
| 10 | 1280*1024 | 60 | 63.98 |
| 11 | 1280*1024 | 75 | 80.00 |
| 12 | 1920*1080 | 60 | 67.5 |
AV EQUIPMENT
You can use the input terminals on the TV set as follows.
Diagram illustrates connecting various video equipment to the TV's input terminals (HDMI, USB, VGA, PC AUDIO, COAXIAL, RF). A separate diagram shows YPbPr connections with color-coded plugs (Yellow for video, White for audio L, Red for audio R/Pr, Blue for Pb, Green for Y). Another diagram shows AV and YPbPr connections to the TV's rear ports.
The television's inputs can be connected to the following types of equipment: VCR, DVD player, camcorder, video game or stereo system, etc..... YPbPr can support these video formats: 480i, 576i, 480p, 576p, 720p, 1080i.
REMOTE CONTROL
Diagram of the remote control with numbered buttons (1-27) and symbols. A list details the function of each numbered button.
- POWER: Press to turn the TV on or to turn off (standby).
- NUMBER KEY: Press to input the channel number.
- [Menu Button]: Press to display the on-screen menu.
- CURSOR: Use the up, down, left, and right keys to move within the menu.
- EXIT: Press to exit the on-screen menu.
- VOL+/-: Press to adjust the sound level.
- P.M: Press repeatedly to select a picture mode: Vivid, Standard, Sports, Movie, or Custom.
- [Source Button]: Press to display and select the available video sources.
- MUTE: Press to disable or enable the sound.
- RECALL: Press to change to the previously viewed channel.
- ENTER: Press to confirm the selection.
- TV DISPLAY: Press to display/hide the program information.
- S.M: Press repeatedly to switch audio modes: Standard, News, Music, Theater, Sports or Custom.
- CH+/CH-: Press to change the channel.
- ASPECT: Press to change the picture aspect ratio: Normal, Wide, Auto.
- CH LIST: Press to display the channel list.
- EPG: Press to display the channel guide.
- FAV: Press to access the favorite channels list.
- HDMI: Press to directly switch to HDMI mode.
- AV: Press to directly switch to AV mode.
- DTV STRENGTH: Press to display the digital TV signal strength.
- TV: Press to directly switch to TV mode.
- YPbPr: Press to directly switch to Component (YPbPr) mode.
- CC: Press to enable/disable the closed captions.
- VGA: Press to directly switch to VGA (PC input) mode.
- MTS: Press to change the audio language, if available.
- COLOR KEYS: Reserved keys
OPERATION
1. PICTURE MENU
In this menu, you can adjust the picture effect here, such as contrast, brightness, etc. Press [Up/Down Arrow] to select, press ENTER to adjust.
Screenshot of the Picture Menu showing options like Picture Mode, Color Temperature, VGA Setting, Aspect Ratio, Noise Reduction.
Note:
- Audio language is available in ATSC/TV Programming only.
- Auto volume is available only when the input signal volume is too large or there is distortion.
If you want to adjust contrast, brightness, color, and sharpness, the picture mode must return to personal status. Standard mode is the default setting; if you select some other options, the power consumption may change. Tint is available in NTSC system only. There are three color temperature modes that can be selected: Normal, Warm, and Cool.
1.1 VGA Setting
When PC Mode is available. Press ENTER button to select VGA setting:
- H-Pos: Adjust the horizontal position of the screen.
- V-Pos: Adjust the vertical position of the screen.
- Clock: Fine tune the screen width.
- Phase: Fine tune the phase of the screen. Usually, do not adjust this item.
- Auto: Auto adjust to fit the screen.
2. AUDIO menu
In this menu, you can adjust the sound effect here. Press [Up/Down Arrow] to select, press ENTER to adjust.
Screenshot of the Audio Menu showing options like Sound Mode, Audio Language, Digital Output, Surround Sound, Auto Volume.
3. TIMER MENU
In this menu, you can adjust the sleep timer, time zone, etc. Press [Up/Down Arrow] to select, press ENTER to adjust.
Screenshot of the Timer Menu showing options like Sleep Timer, Time Zone, DST, Time Format, Clock.
Note: Time zone, DST and the clock are available in ATSC programming only, and the Clock can't be adjusted.
4. OPTION menu
In this menu, you can adjust the Menu language, Close Caption, Restore Default, etc. Press [Up/Down Arrow] to select, press ENTER to adjust.
Screenshot of the Option Menu showing options like Menu Language, Closed Caption, Restore Default, Setup wizard, Software update.
4.1 Closed Caption
CC Mode: Switching close caption mode. Advanced selection: only ATSC program is available. Option: Used to edit CC font.
Note: Restore Default will clear all the programs and reset all the settings to default value.
5. LOCK MENU
In this menu, you can change the password and adjust the vchip setting. Enter the password; it will go into the lock menu. Factory default password is 6666.
5.1 Change Password
- Old password: Input the old password.
- New password: Input the new password.
- Confirm password: Input the new password again.
5.2 System Lock
When the System Lock switch is ON, the options listed below can be adjusted.
5.3 US
Press ENTER button; the screen will display as follows:
Screenshot showing TV rating options for US: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, TV-MA, with sub-options for FV, V, S, L, D.
MPAA: Switching the movie-rating control level: N/A, G, PG, PG-13, R, NC-17, X.
| Rating | Description |
|---|---|
| G | General audiences, All Ages admitted |
| PG | Parental Guidance suggested. Some material may not be Suitable for children. |
| PG-13 | Parents strongly cautioned. Some material may be Inappropriate for children under 13. |
| R | Restrict. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions). |
| NC-17 | No one 17 and under admitted. |
| X | X is an order rating that is unified with NC-17 but may be encoded in the data of order movies. |
And use the ENTER key to switch lock/unlock Parental Control feature.
5.4 Canada
Press ENTER button; the screen will be displayed as follow:
Screenshot showing TV rating options for Canada: Canada Eng, Canada Fre.
Canada English: Switching the English rating control level: EXEMPT, C, C8+, G, PG, 14+, 18+.
Canada French: Switching the French-rating control level: E, G, 8ANS+, 13ANS+, 16ANS+, 18ANS+.
| Rating | Description |
|---|---|
| E | Exempt programming |
| G | General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner. |
| 8ans+ | General but inadvisable for young children: May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing with parent. |
| 13ans+ | Over 13 years: Could contain scenes of frequent violent scenes and intense violence. |
| 16ans+ | Over 16 years: Could contain frequent violent scenes and violence. |
| 18ans+ | Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence. |
5.5 RRT setting
In ATSC digital TV mode, it can be adjusted.
5.6 Reset RRT:
Press ENTER button; the screen will be displayed as follow:
6. Channel MENU
In this menu, you can adjust digital and analog TV Channels. Press [Up/Down Arrow] to select, press ENTER to adjust.
Screenshot of the Channel Menu showing options like Air/Cable, Auto Scan, Favorite, Show/Hide, DTV Signal.
6.1 Air/Cable:
Select Air TV signal and cable TV signal.
6.2 Auto Scan:
If it's the first time you use the TV, you should scan all the TV channels first. Press ENTER button to confirm; you will see the menu.
Screenshot of the Auto Scan menu showing Scan all channels, Digital channel only, Analog channel only.
Press ENTER button to select a scan type; you will see the message below which indicates auto search is in process.
Screenshot of Auto Scan progress showing DTV+ATV, Found, Analog, Digital counts.
6.3 Favorite:
Press ENTER button to choose/delete the favorite channel.
6.4 Show/Hide:
Press ENTER button to display or hide current channel.
6.5 DTV signal:
Display DTV strength signal. It can't be selected and adjusted.
7. USB function
Before starting operation, verify that the USB storage device is using the FAT32 file system format. This television does not support NTFS or other formats. Please use a high-speed USB 2.0 device with a maximum capacity of 50GB.
- This USB has the function of picture playing. Use [Select Button] to select the .jpg files or folders, press ENTER to display the photo or open the folder, press EXIT to stop playing or go to the previous menu.
- This USB also has the function of software updating for service purpose.
TROUBLE SHOOTING
| Picture Symptom | Audio Symptom | Inspection Check |
|---|---|---|
| Snow | Noise | Antenna position, direction, or connection. |
| Ghost | Normal audio | Antenna position, direction, or connection. |
| Interference | Noise | Electronic equipment, car/motorcycle, fluorescent light. |
| Normal Picture | Mute | Volume (check if mute is activated or if the audio system connections are not correct). |
| No picture | Mute | Power cord is not inserted. Power switch is not opened. Contrast and brightness/volume setup. Press standby key on the remote control for inspecting. |
| No color | Normal audio | Color control. |
| Picture breaking up | Normal audio or weak | Retune channel. |
| No color | Noise | TV system. |
The LCD TV panel is built with very high precision technology, giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black, or white. Please note this does not affect the performance of the product.
