Coverado Seat Cover Installation

Preparing for Front Row Installation

Hook Preparation

The hook installation involves a three-step process:

• Start with the hook in its initial shape.
• Bend the hook into a second shape.
• The final step shows the hook ready for use, attached to a strap.

Chuck Preparation

The chuck installation involves a three-step process:

• Begin with the chuck in its initial form.
• Insert the chuck into a tool.
• The final step shows the chuck secured in the tool.

Horn Preparation

The horn installation involves two steps:

• A side view of the horn component.
• The horn is shown being inserted into a car seat, with dotted lines indicating attachment points.

TIP: Before installation, please confirm whether the number of accessories is correct.

Accessories included for front row installation: Chucks x 4, Hooks x 4, Horns x 2.

Visual representation of the front seat covers and their components.

Front Seat Covers Installation

Follow these steps to install the front seat covers:

1. Place the seat cover over the car seat, with an arrow indicating the direction.
2. Adjust the headrest height (levels 1, 2, 3) and secure the cover.
3. Insert the chucks into the designated slots under the seat.
4. Secure the bottom of the seat cover using the provided straps and buckles.
5. Slide the seat cover down and tuck it into place.
6. Fasten the buckles to secure the cover.
7. A close-up view of the buckle mechanism for securing the seat cover.
8. The final image shows the front seats with the covers installed.

Preparing for Rear Seat Installation

Chuck Preparation

The chuck installation for the rear seat involves a three-step process:

• Start with the chuck in its initial form.
• Insert the chuck into a tool.
• The final step shows the chuck secured in the tool.

Button Preparation

The button component is shown in two similar states, indicating its form.

Horn Preparation

The horn installation involves two steps:

• A side view of the horn component.
• The horn is shown being inserted into a car seat, with dotted lines indicating attachment points.

TIP: Before installation, please confirm whether the number of accessories is correct.

Accessories included for rear seat installation: Chucks x 7, Buttons x 5, Horns x 2.

Visual representation of the rear seat covers and their components.

Rear Seat Covers Installation

Follow these steps to install the rear seat covers:

1. Place the rear seat cover over the car seats, with an arrow indicating the direction.
2. Adjust the headrest height (levels 1, 2).
3. Align and attach the rear seat covers, showing multiple attachment points.
4. Insert the chucks into the designated slots under the seats.
5. Slide the seat covers down and tuck them into place.
6. Fasten the buckles to secure the covers.
7. A close-up view of the buckle mechanism for securing the rear seat covers.
8. The final image shows the rear seats with the covers installed.