Coverado Seat Cover Installation
Products: Coverado Universal Seat Covers
Website: www.coverado.com
Contact: coveradoservice@163.com
Preparing for Front Row Installation
Hook Preparation:
Illustration showing a hook being bent into a specific shape for attachment. [Sequence of three images showing hook manipulation.]
Chuck Preparation:
Illustration showing a chuck being inserted into a seat frame using a tool. [Sequence of three images showing chuck insertion.]
Tip: Before installation, please confirm whether the number of accessories is correct.
Required Accessories: Chucks × 6, Hooks × 4
Illustration showing the components for front seat installation: two seat bottom covers, two seat back covers, and multiple hooks and chucks.
Front Seat Covers Installation
Follow these steps to install the front seat covers:
- Place the seat bottom cover onto the car seat.
- Pull the cover down and secure it using the provided chucks and hooks.
- Place the seat back cover over the seat back.
- Secure the seat back cover, ensuring it fits snugly.
- Install the headrest covers.
- Adjust and tuck in any excess material for a neat finish.
Detailed Steps (Visual Descriptions):
Image 1: A seat cover is shown being placed over the seat. [Directional arrow indicating placement.]
Image 2: The seat cover is pulled down, and arrows indicate tucking it under the seat.
Image 3: The seat cover is shown fitted over the seat, with straps ready for securing.
Image 4: The headrest cover is placed onto the headrest. [Directional arrow indicating placement.]
Image 5: A close-up shows how to secure the seat cover using straps and a chuck, with a circular inset highlighting the mechanism.
Image 6: An arrow indicates pushing the seat cover down into the seat crevice.
Image 7: The headrest is shown being reattached to the seat after the cover is installed. [Directional arrow indicating reattachment.]
Image 8: The final front seat cover installation is shown.
Image 9: Arrows indicate tucking the seat cover edges for a clean look.
Image 10: The front seats are shown fully installed with covers.
Front seats cover installed.
Preparing for Rear Seat Installation
Hook Preparation:
Illustration showing a hook being bent into a specific shape for attachment. [Sequence of three images showing hook manipulation.]
Chuck Preparation:
Illustration showing a chuck being inserted into a seat frame using a tool. [Sequence of three images showing chuck insertion.]
Tip: Before installation, please confirm whether the number of accessories is correct.
Required Accessories: Chucks × 5, Hooks × 1
Illustration showing the components for rear seat installation: two seat bottom covers (one for 60/40 split, one for full bench), two seat back covers, and accessories. Parts are numbered 1, 2, 3, 4.
Note: There may be two installation methods when the rear seat belt is installed: (1+3)/(2+4) or (1+4)/(2+3). Both methods are normal; please rest assured to install.
Rear Seat Bottom Covers Installation
There are two methods for installing the rear seat bottom covers:
Method 1: No need to remove the rear seat bottom
Diagrams show the process of securing the seat bottom cover without removing the seat. This involves inserting chucks and tightening straps.
Image 1: Chucks are inserted into the seat frame. [Directional arrow indicating insertion.]
Image 2: Straps are pulled tight. [Directional arrow indicating tightening.]
Image 3: The cover is secured in place.
Method 2: Remove the rear seat bottom
Diagrams show the process of removing the rear seat bottom, installing the cover, and then reattaching the seat.
Image 1: The rear seat bottom is lifted or detached. [Directional arrow indicating removal.]
Image 2: The seat bottom is rotated 180 degrees.
Image 3: The seat bottom is being reinstalled. [Directional arrow indicating reinstallation.]
Image 4: Shows two configurations for securing the seat bottom cover, possibly related to seat belt anchors or frame structure. Labeled "or".
Image 5: The seat bottom covers are shown being placed and secured.
Image 6: The rear seat bottom covers are installed.
Rear Seat Back Covers Installation
Follow these steps to install the rear seat back covers:
- Slide the seat back cover over the seat back. [Directional arrow indicating sliding.]
- Zip up the cover along the side or back.
- Secure the cover using the provided straps and chucks.
- Install the headrest covers. [Directional arrow indicating placement.]
- Adjust and tuck in any excess material.
Detailed Steps (Visual Descriptions):
Image 1: A seat back cover is shown being slid onto the seat back, with an arrow indicating direction.
Image 2: The seat back cover is shown fitted, with straps extending from the bottom.
Image 3: The cover is being zipped up.
Image 4: The headrest covers are being installed.
Image 5: A close-up shows how to secure the seat back cover using straps and a chuck.
Image 6: The rear seat back covers are shown being adjusted or tightened.
Image 7: The rear seats are shown fully installed with covers.
Rear seat cover installed.
