Logitech Crayon Setup Guide
Product Setup
To start using Logitech Crayon, simply turn on and draw. No software downloads or pairing required. Here are some tips to get started:
- Make sure you are using iPad Pro 12.9-inch (3rd gen), iPad Pro 11-inch, iPad Air (3rd gen), iPad mini (5th gen), or iPad (6th gen). These are the only devices that are compatible with Logitech Crayon.
- Make sure iPad is updated to iOS 12.2 or above. To check your iOS version, go to iPad Settings → General → Software.
- Disconnect any previously connected digital pencils, such as Apple Pencil®, prior to using Crayon by going to iPad Settings → Bluetooth → Select the device you want to disconnect. If you do not want to forget other digital pencils, simply turn your Bluetooth® off before using Crayon.
- Press the power button for 1 second. If the LED turns green, you're ready to go. If LED turns red, charge Crayon before use.
Software Updates
Updating the iOS on your iPad may affect your experience with Crayon. If you notice changes in functionality, simply follow these steps:
- Download Logitech Crayon software update at https://support.logitech.com/product/crayon-ipad/downloads
- Connect Logitech Crayon to laptop via lightning cable.
- Follow the prompts to update software.
To get notifications about software updates, product tips, and more, visit https://support.logitech.com/product/crayon-ipad/register
Use
Use with hundreds of Apple Pencil compatible apps, which are downloadable in the App Store. Logitech Crayon is not pressure sensitive, so there is no need to press down hard on the iPad. Just tilt for thicker or thinner lines.
How to Charge
- Flip open the cap.
- Insert lightning cable.
- Connect cable to a power adapter or computer to charge.
It takes about 30 minutes to charge Crayon from 0 to 100%.
Note: Crayon will not work while charging.
Image Description: A close-up view shows a Lightning cable being inserted into the charging port of the Logitech Crayon, which has an orange cap.
LED Behavior
LED Behavior | Logitech Crayon Status |
---|---|
Fade in green | Power on |
Fade out green | Power off |
Solid green | Fully charged |
Breathing green | Charging |
Blinking red | Battery level is critical (less than 5%) |
Red when user presses button | Battery level is low (less than 10%) |
Green when user presses button | Battery level is good |
Yellow | Firmware update |
Know Your Product
Diagram Description: An illustration of the Logitech Crayon shows its components: Tip cover, Pencil tube, Power button, Cap, Tip, LED indicator, and Lightning port.
Replaceable Parts
The tip can be damaged if Logitech Crayon is dropped and will also wear down with use. If either of these occur, the tip will need to be replaced to avoid damaging the screen.
Replacement tip covers and caps can be purchased at https://support.logitech.com/product/crayon-ipad/spare-parts
Replacement tips can be purchased at https://www.logitech.com/product/crayon-replacement-tip
Care and Storage Tips
- To preserve battery, power Crayon off when you are done using it. If you forget, Crayon will automatically shut off after 30 minutes of being idle.
- Though Crayon is designed with 4-foot drop protection, avoid drops as this might damage the tip of your Crayon or the electronics inside.
- Do not leave the cap open as dirt, dust, and other foreign objects can get inside the charging port.
- If you need to clean Crayon, spray a cloth with water or a gentle cleaner (less than 15% alcohol) until it's damp (not soaked), and wipe the surface of the Crayon. Avoid getting moisture in the charging port, and make sure Crayon is completely dry before storing.