EnergyShroom PB401 Power Bank
Thank you for choosing the EnergyShroom PB401 Power Bank by Boat. This high-capacity, 20000mAh portable charging device utilizes a Li-ion polymer battery for a safe, fast, and efficient user experience. It is designed to charge devices such as cell phones, tablets, MP3 players, and digital cameras. The power bank features both Micro USB and Type C (2-way) input interfaces, and 2 USB-A & 1 Type C (2-way) output interfaces for versatile connectivity.
Contents
- 1x EnergyShroom PB401
- 1x Manual
- 1x Type C Cable
- 1x Warranty Card
Product Overview
- Micro-USB Port (Input)
- Type C Port (2-Way)
- USB-A Ports (Output)
- GC/PD/PPS Charging Indicator
- Battery Level Indicator
- Power Button
Features
- Supports Micro USB and Type C (2-Way) charging input ports, along with 2 USB-A and a Type C (2-Way) Output ports.
- Built-in 12-layer Smart IC protection against short circuit, overcharge, and over-discharge.
- Intelligent input/output control and LED indicators.
- Supports 2-way 22.5W (Max) fast charging, including Quick Charge 3.0, Power Delivery, and PPS protocol support.
- Ultra-portable and durable with high temperature and scratch resistance, featuring a desk-friendly casing.
- Pass-through charging allows charging the power bank while it charges your devices.
LED Functions
Press the power button once to switch the LED indicator on and view the charging status of the power bank.
| LED Indicator | Battery Level |
|---|---|
| 1 LED in solid light | 2-25% |
| 2 LEDs in solid light | 20-50% |
| 3 LEDs in solid light | 50-75% |
| 4 LEDs in solid light | 75-100% |
The LED indicator will illuminate to show the battery status of the power bank. When your power bank or device uses Quick Charge 3.0, Power Delivery, or PPS fast charging/discharging, the top LED indicator will turn green. [Green LED indicates fast charging]
Button Functions
- Press the power button once to switch the LED indicator on and see the power bank's charging status.
- To switch the LED off, press the power button twice.
- Press and hold the power button to stop the power bank from charging your device; press it once again to continue charging.
Charging EnergyShroom PB401
- Connect the Micro-USB/Type-C connector to the Micro-USB/Type C port of the power bank.
- Then, connect the USB-A/Type-C connector to the adapter or laptop/computer USB port.
- An LED will blink to indicate charging, depending on the battery level of the power bank. All 4 LEDs will light up when the power bank is fully charged.
- If you are charging your power bank with a compatible Quick Charge 3.0, Power Delivery, or PPS fast charger, the top LED indicator will turn green.
Note: Computer USB port output is generally less than a wall adapter.
Product Specification
| Specification | Details |
|---|---|
| Capacity | 20000mAh 3.7V (74Wh) |
| Atheri Capacity | 10000mAh 5.0V (7.91 Gh) |
| Dimension | 144.8 x 66.7 x 28.3mm |
| Battery Type | Li-ion polymer |
| Input (Micro) | DC 5V/2A, 9V/2A, 12V/1.5A |
| Input (Type-C) | DC 5V/3A, 9V/2A, 12V/1.5A |
| Input Ports | 1x Micro USB, 1x Type C (2-way) |
| Output Ports | 2x USB-A, 1x Type C (2-way) |
| Output (USB 1/2) | 5V/3A, 9V/2.22A, 12V/1.67A, 9V/4.5A |
| Output (Type C) | 5V/3A, 9V/2.22A, 12V/1.67A, 5V/3V/2.0A (IMS) |
| Fully Charged by 9V 2.0A adaptor | 6 hrs 30 min + 10 min |
| Fully Discharged by 16W load | 3 hrs 30 min + 10 min |
| Operating Environment | -10 to 20° Celsius |
| Overcurrent Protection | Protected (3.6x0.90A) |
| Over Charging Voltage Protection | 16x0.05 V |
| Short Circuit Protection | Protected |
| Body Temperature Cut Off | Yes (55-60° Celsius) |
Important User Instructions
- Please utilize the standard Type C charging cable to charge the device.
- It is recommended to charge the power bank fully before its first use.
- Do not leave the power bank inside a car unattended.
- The product should be safeguarded against any physical shock or vibration.
- Keep out of reach of children.
- If the power bank gets discharged completely, ensure to charge it quickly.
- Do not leave the battery on charge for over 24 hours.
- Charging current and voltage should not exceed the maximum specified amounts.
Warning
- Do not drop, decompose, impact the device, or attempt to repair it yourself.
- Do not expose the product to water, fire, or direct sunlight.
- Do not use the product around combustible gas, as it may catch fire and/or cause burns.
- Do not disassemble or attempt to replace the Li-polymer battery under any circumstances, as it may damage the device permanently.
C-Waste Management
As per government rules, all C-wastes are to be managed through effective treatment under specialized methodologies prescribed by the Government of India. Do not dispose of the product as unsorted municipal waste. The waste will be treated according to the norms set by the pollution control board. Please contact customer care for guidance on proper disposal of this product.
D-Waste Management
As per government rules, all D-wastes are to be managed through effective treatment under specialized methodologies prescribed by the Government of India. Do not dispose of the product as unsorted municipal waste. The waste will be treated according to the norms set by the pollution control board. Please contact customer care for guidance on proper disposal of this product.
