VonHaus Pergola

Components

The following parts are included in the package:

• Part A1: Vertical post element (Qty: 2)
• Part A2: Vertical post element (Qty: 2)
• Part A11: Horizontal connecting piece for posts (Qty: 4)
• Part B1: Main horizontal roof beam (Qty: 4)
• Part B2: Main horizontal roof beam (Qty: 1)
• Part B3: Main horizontal roof beam (Qty: 4)
• Part B11: Smaller horizontal roof beam/connector (Qty: 2)
• Part B22: Smaller horizontal roof beam/connector (Qty: 1)
• Part C: Roof crossbar (Qty: 2)
• Part C1: Roof crossbar (Qty: 2)
• Part D1: Small metal connector/bracket (Qty: 4)
• Part D2: Small metal connector/bracket (Qty: 1)
• Part D3: Small metal connector/bracket (Qty: 5)
• Part D22: Small metal connector/bracket (Qty: 1)
• Part E: Screws/bolts (Qty: 15)
• Part F: Retractable canopy fabric (Qty: 1)
• Part G: Brackets or connectors (Qty: 14)
• Part H: Corner brackets for posts (Qty: 4)
• Part I: Washers or small fasteners (Qty: 138)
• Part J: Small brackets (Qty: 4)
• Part K: Screws/bolts (Qty: 16)
• Part L: Allen key (Qty: 16)
• Part M: Screws/bolts (Qty: 6)
• Part N: Screws/bolts (Qty: 24)
• Part O: Screws/bolts (Qty: 108)
• Part P: Flat plates with holes (Qty: 8)
• Part Q: Connectors (Qty: 9)
• Part R1: End cap or decorative element (Qty: 4)
• Part R2: End cap or decorative element (Qty: 4)
• Part S: Canopy sliders/hooks (Qty: 10)

Assembly Instructions

1. Step 1: Connect Part G to Parts B1 (x2) and B11 (x2) using Screws O (x8) and K (x8). Repeat for the other side.
2. Step 2: Connect Part G to Parts B2 (x1) and B22 (x1) using Screw Q (x1) and Screws K (x4). Repeat for the other side.
3. Step 3: Attach Parts B3 (x2) to the main frame using Parts G (x4), Q (x2), O (x8), and K (x8).
4. Step 4: Secure Parts C (x4) and C1 (x2) to the frame using Parts G (x4), Q (x4), O (x16), and K (x16).
5. Step 5: Assemble the vertical supports. Connect Part H (x4) to Parts A1 (x2) and A2 (x2) using Parts P (x8), J (x4), O (x40), and K (x40). Then attach Part A11 (x4) to the assembled supports.
6. Step 6: Join the main horizontal frame sections. Attach Parts N (x6) and K (x6) to connect the frame elements.
7. Step 7: Attach the main vertical support posts (A1, A2) to the frame using Parts N (x6) and K (x6).
8. Step 8: Reinforce the main structure by attaching Parts N (x12) and K (x12).
9. Step 9: Install the roof crossbars. Connect Parts B1 (x2), B2 (x1), B3 (x2) to the frame using Parts M (x6) and K (x6).
10. Step 10: Complete the frame assembly by attaching Parts R1 (x4), R2 (x4), O (x32), and K (x32).
11. Step 11: Install the canopy fabric (F). Attach it to the frame using Parts D1 (x8), D2 (x1), D3 (x5), D22 (x1), and S (x10).
12. Step 12: Finalize assembly. Secure the canopy and frame using Part L (Allen key) for final tightening.

Installation Notice

Three-person installation required.

Do not tighten the screws until they reach the 3/4 position. Finally assemble and tighten all the screws.

Maintenance

General Care

1. Regularly inspect the pergola for any signs of damage or wear.
2. Clean the pergola with a mild detergent and water to remove dirt and debris.
3. Ensure the pergola is securely anchored to the ground.
4. Trim any overhanging branches or vines that may interfere with the structure.

Health & Safety

1. Ensure the pergola is securely anchored to prevent it from tipping over.
2. Regularly inspect the pergola for any signs of wear or damage.
3. Do not overload the pergola with heavy objects or decorations.
4. Keep the area around the pergola clear of flammable materials.
5. Use appropriate tools and safety gear when assembling or maintaining the pergola.

Troubleshooting

Common Issues and Solutions

1. Issue: Pergola is not stable.
   Solution: Ensure all bolts and screws are tightly secured. Check if the ground is level and adjust the pergola legs if necessary.
2. Issue: Leaking pergola roof.
   Solution: Inspect the roof for any cracks or gaps. Apply a waterproof sealant to the affected areas.
3. Issue: Pergola canopy is sagging.
   Solution: Tighten the canopy fabric and ensure it is properly secured to the frame. Replace any worn-out or damaged parts.
4. Issue: Preventing rust.
   Solution: Regularly clean the pergola and apply a rust-resistant coating to the metal parts.
5. Issue: Bent pergola frame.
   Solution: Carefully straighten the bent parts using appropriate tools. If the damage is severe, consider replacing the affected sections.

Legal and Support

Disposal Information

Please recycle where facilities exist. Check with your local authority for recycling advice. [Recycling Icon]

Customer Service

If you are having difficulty using this product and require support, please contact support@vonhaus.com.

Warranty

To register your product and find out if you qualify for a free extended warranty, please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty.

Returns

Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.

Copyright

All material in this instruction manual are copyrighted by DOMU Brands. Any unauthorised use may violate worldwide copyright, trademark, and other laws. [Copyright Icon]

Authorised Representative

77 Camden Street Lower, Dublin, D02 XE80, Ireland