VEVOR Utility Carts User Manual

Introduction

VEVOR is committed to providing tools with competitive prices. Expressions like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and may not apply to all categories. Please verify savings carefully when placing an order.

This document is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The appearance of the product is subject to the item received. VEVOR will not provide separate notification for technology or software updates.

Product Overview

This section describes the VEVOR JYUP2 Utility Cart. The cart is designed for practical use, featuring multiple platforms and durable construction. It is equipped with four wheels for mobility, including brake casters for stability.

Visual Description: The cart is depicted as a three-tier utility cart with a metal frame and plastic platforms. It has two side handles for pushing and steering. Four wheels are attached to the base, with two appearing to be fixed and two swivel casters, likely including brake mechanisms.

Product Parameters

Assembly and Operation Instructions

⚠️ WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.

Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

Assembly Precautions

• Assemble according to these instructions. Improper assembly can cause personal injury and/or property damage.
• Do not assemble when tired or under the influence of alcohol, drugs, or medication.
• Weight capacity and other product capabilities apply only to a wholly and correctly assembled product.
• Do not overload the cart. Refer to specifications for load capacity (distributed evenly).
• Keep the assembly area clean and well-lit.
• Keep bystanders out of the assembly area.
• The weight of the components can be significant; pay attention during installation to avoid injury. If necessary, find someone to assist with the installation.

Use Precautions

⚠️ WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

• This product is not a toy. Do not allow children to play with or approach this item.
• Use as intended only. Do not sit or stand on the product.
• Inspect before every use. Do not use if parts are loose or damaged.
• Use on flat, level, and hard surfaces only.
• Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading; sudden load movement may briefly create an excess load, causing product failure.
• When moving a heavy load for a long time, check if screws are loose to avoid the cart shaking.

Assembly Steps

Tools required: Cross-point screwdriver, and rubber or wood mallet.

Use the mallet to tap down parts to ensure they are seated properly before fastening with screws.

1. Turn the upper platform upright (#2) and install the handle (#1).
2. Turn the upper platform assembly upside down and install legs (two left, #4 and two right, #5).
3. Install the lower platform (#3) and castors (#6, #7). Tighten all screws and hex nuts (#8, #9, #10).

Parts Breakdown

Manufacturer and Importer Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

European Representative: E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.

UK Representative: YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX