Smart Watch User Manual

Product Overview

This manual provides detailed information on the features, setup, and operation of your Smart Watch. It covers everything from initial setup and app binding to understanding various functions and troubleshooting common issues.

Key Specifications:

Care Instructions:

• Clean the bracelet regularly, especially the inside, to keep it dry.
• Adjust the tightness for air circulation.
• Avoid excessive skin care products on the wrist.
• Discontinue use if skin irritation or discomfort occurs.

Getting Started

Powering On and Charging

To power on the watch, press and hold the upper button for 3 seconds or plug in the charger. The watch charges magnetically using the provided base.

Bracelet APP Download and Binding

1. Download and Install the APP: Scan the QR code or search for "Glory Fit" in your mobile phone's app store (App Store for iOS, App Bora for Android). Ensure your mobile phone supports Android 4.4 or iOS 9.0 and above.

2. APP Binding: Open the Glory Fit app, tap "Add Device" > "Select Device", and choose your bracelet from the list. For iOS, you may receive a Bluetooth pairing request; confirm it. Binding is successful once confirmed.

Note: Ensure the bracelet is in an open state (displaying the time/date) and the Bluetooth icon link is visible before binding.

Bracelet Functions

Power-on Status and Interface Switching

The watch features multiple watch faces (dials). You can switch between them by long-pressing the main dial. Additional dials can be selected or customized via the Glory Fit app.

Shortcut Button: Pressing the shortcut button allows switching between 3 sets of theme UIs.

Key Functions

• Up Button: Serves as the main function button.
• Down Button: Navigates to the call page.

Unbinding the Bracelet

• Android: Disconnect by selecting "Remove Device" in the app.
• iOS: After removing the device in the app, you may need to "forget" the device in your phone's Bluetooth settings.

Reminder Function

Enable the reminder switch in the "Device" section of the Glory Fit app. Ensure Bluetooth connection is active for notifications.

• Incoming Call Reminder: The bracelet vibrates and displays the caller's name or number. You can reject calls by long-pressing the screen if the "Call Rejection" function is enabled in the app.
• Reminder Classification: Supports call reminders, message reminders, sedentary reminders, smart alarm reminders, and do not disturb mode.
• SMS Reminder: Vibrates and displays an icon upon receiving text messages.
• Application Software Reminder: Vibrates and displays an icon for app notifications (e.g., WeChat).
• Smart Alarm Clock: Allows setting up to three alarms. Alarms are silent and vibrate the wristband. Offline alarm reminders are supported.

Sedentary Reminder

By default, the bracelet reminds you to exercise if no activity is detected for one hour. This feature requires an active Bluetooth connection.

Other Reminders

Receive notifications for emails and other information, indicated by icons. Tap to view content.

Charging Reminder

The watch vibrates when connected to power or the charging stand. Note that it will not vibrate in low or full power states.

Sleep Detection Function

The bracelet automatically monitors sleep patterns (deep sleep, light sleep, awake time) and calculates sleep quality. Sleep data is available in the Glory Fit app and requires wearing the bracelet during sleep.

Camera Control

Shake the bracelet to take remote pictures. A stable Bluetooth connection is required.

Restore Device

Use the "Restore Device" option in the app to delete all history records from both the app and the device.

Common Problems and Solutions

Heart Rate Testing

Initial heart rate tests may take longer as the device collects sufficient signal data for accurate calculation.

Bluetooth Connection Issues

• Failure or Slow Connection: Ensure your device is compatible (iOS 9.0+, Android 4.4+) and supports Bluetooth 5.0. Minimize signal interference by turning Bluetooth off and on, closing background apps, restarting your phone, or avoiding simultaneous connections with other Bluetooth devices. Ensure the Glory Fit app is running in the background.
• Cannot Find Bracelet: Verify the bracelet is powered on, activated, and not connected to other phones. Move the bracelet closer to your phone. If issues persist, turn off your phone's Bluetooth for 20 seconds and then restart it.

Wearing for Heart Rate Measurement

Wear the bracelet snugly against your skin. The heart rate is measured using light reflection; a tight fit ensures accurate readings by preventing ambient light from interfering with the sensor.

Reminder Function Not Working

• Android: Confirm the phone and bracelet are connected and that the Glory Fit app has the necessary permissions in the phone's settings to access incoming calls, text messages, and contacts. Ensure the app runs in the background.
• iOS: If reminders are not received after connecting, restart your phone and reconnect. Wait for the Bluetooth pairing request and confirm "Pairing".

Waterproof Capabilities

The bracelet has an IP67 waterproof and dustproof rating. It can withstand immersion in water up to 1 meter for 30 minutes and is suitable for activities like washing hands, being in the rain, showering in cold water, and washing cars.

Bluetooth Connection Requirement and Data Synchronization

Data is stored on the bracelet for up to seven days. For successful synchronization, maintain a Bluetooth connection between the phone and the bracelet. Data is automatically uploaded when connected. Synchronize data promptly.

Note: For call and SMS reminders, Bluetooth must remain connected. Alarm clock reminders function offline.

Important Safety Information

Warning: Consult a doctor before starting new sports activities. While the smart bracelet monitors heart rate, it is not intended for medical use.

Support

For assistance with connection or any other questions, please contact the after-sales team.

• WhatsApp: +8618794363304
• Email: GA99805@163.com