Honeywell TC500 Thermostat Configuration Wizard

Key Features and Configuration Options

The TC500 Thermostat Configuration Wizard offers a user-friendly interface to manage critical HVAC settings:

• General Settings: Configure power-up delays, override times, and demand response adjustments.
• Equipment Configuration: Select and define parameters for conventional, air-side heat pump, and water-side heat pump systems.
• Setpoint Management: Define precise heating and cooling setpoints for occupied, standby, and unoccupied modes, including setpoint recovery and limits.
• PID Control: Optimize system response by configuring Proportional-Integral-Derivative (PID) parameters for both cooling and heating operations.
• Fan Modes: Customize fan operation, including continuous, auto, and fan-only modes, along with speed settings and extended run times.
• Sensor Integration: Configure main control sensors, occupancy checks, airflow status, shutdown inputs, and dirty filter detection.
• Terminal Assignment: Map digital and analog outputs/inputs to specific control functions for seamless integration.

Getting Started

To begin configuring your TC500 Thermostat, ensure you have Niagara-N4.10 or higher installed. The wizard can be accessed via a workbench or a web browser. Detailed steps for launching the application and navigating its features are provided within this guide.

For further assistance and related documentation, please refer to the Honeywell Building Technologies resources.