COMMERCIAL THERMOSTATS

Key Features:

• Honeywell Connect Mobile App: Occupant remote monitoring and control over WiFi; Contractor configuration via Bluetooth for rapid set-up.
• Building Integration: BACnet IP over WiFi or wired BACnet MS/TP.
• Customizable and intuitive UI: Color touch screen display; LED status indicator for operating mode.
• Multi-Level User Controlled Access: Multiple, configurable, levels of user privilege access.
• Embedded Economizer: Precise economizer setup and control for energy savings (coming soon).

Code compliance for Title 24/IECC/ASHRAE codes.

Configurable Inputs/Outputs for flexible utilization in a broad range of applications with less inventory and SKU complexity.

Specifications:

Image of the Honeywell TC500 thermostat displaying a modern color touch screen interface. It shows the current room temperature as 66°F and the setpoint as 68°F, with 'Occupied' status indicated.

Key Features:

• Touchscreen user interface: The sleek menu-driven programming and large touchscreen display are all here.
• Saves energy: Effortless programming helps customers save up to 33% off their energy bill¹.
• Meets commercial building codes: Pre-occupancy Purge, Economizer Output and Override Limits meet all fresh air and override limitation requirements; Qualifies for utility rebates²; Title 24/IECC/ASHRAE codes.
• Multiple lockout levels: Save energy and money by preventing unauthorized setting changes.
• Compatible with auxiliary commercial devices: Commercial sensors, Economizers.
• Commercial comfort: Commercial Algorithm, configurable recovery ramps and temporary override button allow users to control at setpoint and guarantee comfortable environments.

¹ If used as directed. Savings may vary depending on geographic region and usage.

² Where applicable.

Specifications:

Image of the Honeywell TB3026B thermostat featuring a green backlit LCD screen. It displays 'Inside 70°F', 'Set To 70°F', and '28% Humidity', with system mode and time indicators.

Key Features:

• Simple, intuitive user interface: Displays ambient temperature, setpoint, heating or cooling mode, fan status, and remote setback.
• Flexible Installation: Supports 2 or 4 pipe systems in three different operating voltage systems (120/240VAC, 277VAC, or 24VAC); Optional pipe sensor input for auto changeover functionality.
• Precise Control: Proportional plus Integral (P+I) control algorithm for precision temperature regulation; Initial fan motor start-up at full speed for improved life.
• Energy Saving Options: Remote economy mode setback inputs via dry contact using time switch, occupancy sensor, or hotel card key; VersaSpeed™ fan ramp algorithm automatically adjusts fan speed (low, medium, and high); Adjustable setpoint limiters avoid energy wasting extreme heating or cooling settings.

¹ These five relays are wired via terminals W, Y, Gh, Gm and Gl. Relay 1 controls heat open (W) or cool open (Y). Relay 2 controls cooling open or electrical heater output (Y/A). Relays 3, 4 and 5 control the high, medium and low fan speeds respectively (Gh, Gm and GI).

NOTE: In 2-pipe configurations without auxiliary heat, only 4 relays are used; relay 2 (Y/A) is not used.

² Pipe sensor is optional.

Specifications:

Image of the Honeywell TB6575/TB8575 thermostat with a clear digital display showing 'Room Temp 72°F' and 'Set to 72°F', along with mode selection buttons for Heat, Cool/Off, and Fan.

Key Features:

• Integrated humidity sensor: Several strategies for dehumidifying.
• C365-Day Schedule: Schedule holidays throughout the year to save energy.
• Remote sensing: Indoor, outdoor, humidity, occupancy and discharge air sensors available for added flexibility; Outdoor Air and Discharge Air Temperature Lockout.
• AHU/RTU and Fan Coil variants: Multiple staging and/or modulating outputs; LonWorks® Network Communicating variants.

Two 4-20 modulating outputs for controlling heating and cooling valves (T7350H1017 and T7350M1008): Allows thermostat to be used in hydronic heating or cooling applications; Control of staged and modulating hybrid systems.

Specifications:

Image of the Honeywell T7350/T7351 thermostat with a digital display showing 'Occupied', 'Room 72°F', '1:09 PM', and 'Fan On' status, with system and mode control buttons.