TP-Link Tapo Hub Quick Start Guide
Getting Started
Welcome to your TP-Link Tapo Hub. This guide provides essential information to help you set up your device.
The primary method for setup is through the Tapo mobile application. Please follow these steps:
- Download the Tapo app from the [Apple App Store] or [Google Play Store].
- Follow the on-screen instructions within the Tapo app to complete the setup of your Tapo Hub.
Comprehensive setup instructions are available in multiple languages within the Tapo app.
Languages Supported
This guide and the Tapo app are available in numerous languages, including:
- English
- Deutsch
- Français
- Español
- Português Brasil
- Čeština
- Suomi
- Português
- Slovenčina
- Български
- Ελληνικά
- Қазақша
- Dansk
- Українська мова
- Norsk
- Русский язык
- Polski
- Slovenščina
- Magyar
- Nederlands
- Italiano
- Tiếng Việt
- Español (Latinoamérica)
- Lietuvių
- Svenska
- Hrvatski
- Eesti
- Română
- Türkçe
- Srpski jezik/Српски језик
- 繁體中文
- 한국어
- 日本語
- ไทย
- Bahasa Indonesia
- Latviešu
- العربية
Warranty Information
For detailed warranty information, please visit the official TP-Link support website:
Technical Specifications
Operating Frequency and Power
Frequency Band | Nominal Operating Frequency | Max Output Power |
---|---|---|
2400MHz~2483.5MHz | N/A | 20dBm |
863~865MHz | 863.35MHz | 25mW(e.r.p) |
863~865MHz | 864.35MHz | 25mW(e.r.p) |
868~868.6MHz | 868.35MHz | 25mW(e.r.p) |
Note: Restrictions on the use of radio frequencies or frequency bands may apply in certain regions. Please check local regulations.
Safety and Compliance
Safety Information (English)
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link support.
- Do not use the device where wireless devices are not allowed.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended by TP-Link.
- Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Full safety and compliance declarations are available in multiple languages within the Tapo app and on the TP-Link website.
Declarations of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.