Smart Wire-Free Security Camera System

Key Features

• ? 180-Day Battery Life*
• ? Full-Color Night Vision
• ✨ Starlight Sensor
• ? Smart AI Detection and Notification
• ☔ IP65 Weatherproof

2-Camera System

Highlight

Full-Color in the Night

Offer full-color and sharp views day and night, rain or shine.

Smart AI Detection and Notification

Smart AI identifies people, pets, and vehicles, notifying users as needed.

Features

? 2K QHD

Now with 1.7 times more pixels than 1080p, providing clearer videos and photos.

? 180-Day Battery Life*

The rechargeable and removable battery with a low-power protocol extends your usage.

? Wire-Free Placement

No wires means you can place the cameras almost anywhere inside or outside – whatever works for you!

? Sound and Light Alarm

Trigger sound and light as an alarm when motion is detected. (Note: Hub Indoor Use Only)

?️ Two-Way Audio

Enables communication through a built-in microphone and speaker.

☔ IP65 Weatherproof

Helps Tapo C420S2 perform well even in harsh environments with rain and dust.

? Flexible Storage Choices

Save recorded videos on the hub-installed microSD card+ (up to 256 GB) or by using Tapo Care** cloud storage services.

Specifications

Camera

• Image Sensor: 1/3"
• Resolution: 2K QHD (2560 x 1440 px)
• Night Vision: 850 nm IR LED up to 49 ft/15m
• Lens: F/NO: 1.61±10%; Focal Length: 3.18mm±5%
• View Range: 113°

Audio

• Audio Communication: 2-way audio
• Audio Input & Output: Built-in microphone and speaker

Video

• Video Compression: H.264
• Frame Rate: 15/20 fps
• Video Streaming: 2K QHD
• Audio Compression: G.711

Activity Notifications

• Input Trigger: Motion detection, Person detection, Pet detection, Vehicle detection.
• Output Notification: Notification, Snapshot (Tapo Care), Clips (Tapo Care).

Network

• Wireless Protocols: IEEE 802.11b/g/n, 2.4 GHz
• Frequency: 2.4 GHz
• Wireless Security: WPA/WPA2-PSK
• Security: 128 bit AES encryption with SSL/TLS
• Protocol: TCP/IP, ICMP, DNS, HTTPS, TCP, UDP

Specifications

Hardware

• Camera Button: Reset/SYNC Button
• Camera Indicator LED: System LED
• Hub Button: Reset Button; SYNC Button
• Hub Indicator LED: System LED
• Camera Adapter Input: 100-240V, 50/60Hz
• Camera Adapter Output: 5.0V, 1.0A
• Hub Adapter Input: 100-240V, 50/60Hz, 0.3A
• Hub Adapter Output: 9.0V, 0.85A
• External Storage: microSD card slot (Supports up to 256 GB)
• Camera Dimensions (L x W x H): 4.35 x 2.52 x 2.52in. (110.6*64.2*64.2mm)
• Hub Dimensions (L x W x H): 2.8 x 2.8 x 1.2 in. (71.45*71.45*31.25mm)

Others

• Certification: CE, RoHS, RCM
• Package Contents: Tapo C420 Cameras (Battery Included), Tapo H200 Hub, USB Adapter, USB Adapter Cable, DC Power Adapter, Mounting Screws, Mounting Templates, Camera Brackets, Quick Start Guide, RJ45 Ethernet Cable
• Operating Temperature: -20 ℃~45℃ (-4°F ~113 °F)
• Storage Temperature: -20°C~60°C (-4°F~140°F)
• Operating Humidity: 10%~90%RH, Non-condensing
• Storage Humidity: 5%~90%RH, Non-condensing

Device Appearance

Camera - Front View

Visual description of the camera front:

• 1. Spotlights: Illuminate the scene.
• 2. Light Sensor: Detects ambient light levels.
• 3. Motion Sensor: Detects movement.
• 4. Status LED: Indicates the camera's operational status.
• 5. Microphone: Captures audio.
• 6. Lens: Captures video.

Camera - Back View

Visual description of the camera back:

• 7. SYNC/RESET Button: Used for pairing with the hub or resetting the camera.
  • While the camera is powered on:
  • Press for 1 second: Pair with the hub.
  • Press and hold for about 5 seconds: Reset the camera.

Hub Appearance

Visual description of the hub:

• 1. SYNC Button: Used to pair with cameras or silence the hub.
• 2. RESET: A pinhole button to reset the hub. Press and hold for about 5 seconds until the hub LED blinks red.
• 3. microSD Card Slot: For local video recording. A microSD card is required but not included.
• 4. Status LED: Indicates the hub's operational status.

Notes: The hub can connect up to 4 cameras.