LINKChef Slow Juicer Quick Start Guide
A Warm Welcome
Thank you so much for choosing the LINKChef Slow Juicer. We really appreciate that you picked our product to help with your health journey. It's awesome to have you as part of our community.
Our slow juicer is designed to gently extract nutrient-rich liquids from vegetables, and fruits, giving you a refreshing and healthy experience. We believe that adding juicing to your routine will be a rewarding habit for both you and your loved ones.
Have any questions or need assistance? Feel free to reach out to us via email at support@link-chef.com.cn. Our service team is dedicated to providing you with exceptional support throughout your juicing journey.
Thanks again for choosing LINKChef. We're excited to serve you.
For more information and updates about LINKChef, don't hesitate to contact us at marketing@linkchefkitchen.com.
Best regards,
LINKChef Team
Parts Overview
Motor Base
Juicing Bowl
Feeding Cup
Squeezing Auger
Pusher
Cleaning Brush
Juice cup (with measurement markings)
Pulp Container
Tips Before Assembly
Note: Please make sure that all parts are properly installed before starting the unit, otherwise the unit will not turn on!
- Keep the lid open when assembling, the chute can be locked. Otherwise, it cannot be locked. After loading the prepared food, close the lid tightly to start juicing.
(Visual: Hand holding the lid open, showing the chute locked) - Open the lid first, then the chute can be unlocked and disassembled when disassembling. This is a design for safety reasons, to prevent hands from being placed into the chute cup.
(Visual: Hand trying to unlock the chute, showing it's unable to lock)
Note: Please ensure that all parts are assembled before use.
How to Assemble?
Before beginning assembly: Ensure the machine is placed on a flat countertop, is unplugged and the power switch is turned off.
STEP 1
Press the silicone valve to close it properly and tightly.
(Visual: Finger pressing a red silicone valve on the juicing bowl base.)
STEP 2
Place the squeezing bowl on the power base steadily.
(Visual: Juicing bowl assembly being placed onto the motor base.)
STEP 3
Insert screw, rotate to bottom.
(Visual: Inserting the auger (screw) into the juicing bowl.)
STEP 4
Open the Lid.
(Visual: Hand opening the feeding chute lid.)
STEP 5
Rotate the bowl clockwise until the latch is fully engaged in the slot.
(Visual: Hand rotating the juicing bowl assembly to lock it.)
STEP 6
Load prepared fruits or veggies into the feed chute.
(Visual: An apple being placed into the feeding chute.)
STEP 7
Close the lid.
(Visual: Hand closing the feeding chute lid.)
STEP 8
Plug in the power supply and turn the button to "ON".
(Visual: Hand turning the power dial to the "ON" position.)
Warning: Make sure all parts are installed correctly before turning on the power, otherwise the unit will not start.
How to Disassemble?
To disassemble the unit after use and before cleaning, please turn the juicer to "OFF" position and disconnect the juicer from the power source.
STEP 1
Open the cover.
(Visual: Hand opening the feeding chute lid.)
STEP 2
Rotate the bowl counterclockwise.
(Visual: Hand rotating the juicing bowl assembly counterclockwise.)
STEP 3
Lift the bowl upwards.
(Visual: Lifting the juicing bowl assembly upwards.)
STEP 4
Pull the squeezing auger out upwards.
(Visual: Pulling the auger upwards from the juicing bowl.)
STEP 5
Lift the juicing bowl upwards to remove it.
(Visual: Lifting the juicing bowl assembly upwards to detach it.)
Cleaning & Maintenance
Please wash the juicing parts every time immediately after each use, otherwise the pulp might stick tightly in the Juicing Bowl & Squeezing Auger, which will then affect the disassembly, cleaning, and juicing performance.
- Please clean the Silicone Valve underneath the Juicing Bowl. Please pull out the silicone valve as shown in the image below for easy pulp removing and clean under running water.
(Visual: Two images showing the silicone valve being pulled out and cleaned under water.)
Note: Press the silicone valve to close it properly and tightly after cleaning. Otherwise, juice leaks from the Juicing Bowl.
- Please use a soft damp cloth to wipe the power base and power cord.
- Do not put the Power Base into water for cleaning. Wipe it with a damp cloth only.
- Please do not immerse the Power Base or power cord into water.
- Do not use iron wire brush, abrasive or sharp object tools to clean the unit.
- Please do not use water above 40°C to clean the unit.
- After cleaning, please dry the parts thoroughly and store them in a dry, cool place.
Customer Service & Resources
For customer service inquiries, please email: support@link-chef.com.cn
Installation Guide: Watch Installation Guide
Cleaning Tips: Watch Cleaning Tips
