Product Installation Guide: Wall-Mounted Accessories
This guide provides essential steps for the secure installation of various wall-mounted accessories, including hooks and holders. Follow these instructions to ensure proper mounting.
General Installation Procedure
Marking and Drilling: Place the product or its mounting template on the wall at the desired height and position. Use a pencil to mark the drilling points. Subsequently, use an electric drill to create holes at these marked locations and insert the provided expansion screws.
Visual Aid: Depicts marking the wall, drilling holes, and inserting expansion screws.
Attaching the Mounting Bracket: Using a screwdriver, firmly attach the mounting bracket or plate to the wall with the screws provided. Ensure it is level and securely fastened.
Visual Aid: Shows a bracket being screwed into the wall.
Securing the Product: Position the main accessory (e.g., hook, holder) over the installed mounting bracket. Tighten the setting screw, typically located underneath the accessory, to lock it securely in place.
Visual Aid: Illustrates the accessory being attached to the bracket and a final securing screw being tightened.
Illustrated Examples of Accessories
The following diagrams demonstrate the installation process for different types of wall accessories, all following the general procedure outlined above:
Example 1: Single Hook Installation
Illustrates the mounting of a single, curved hook. The process involves attaching a circular base plate, then fitting the hook onto it.
Example 2: Rectangular Holder Installation
Depicts the installation of a rectangular holder, suitable for items like towels. This involves mounting a rectangular bracket first, then attaching the holder body.
Example 3: Square Hook Installation
Shows the mounting of a hook with a square base. The procedure includes attaching a square mounting plate, followed by the hook component.
