Baseus Bowie EZ10 True Wireless Earphones

Getting Started: Pairing Your Earphones

To begin using your Baseus Bowie EZ10 earphones, simply take them out of the charging case. They will automatically power on. To connect, enable wireless mode on your phone, search for the device model Baseus Bowie EZ10, and pair them. For enhanced features, download the Baseus app and link your earphones.

To power off, place the earbuds back into the charging case and close the lid.

Key Features and Controls

Music Mode:

• Play/Pause: Double-tap the left or right earphone.
• Previous Song: Press and hold the left earphone for 1.5 seconds.
• Next Song: Press and hold the right earphone for 1.5 seconds.
• Voice Assistant: Triple-tap the left or right earphone.

Call Mode:

• Answer/Hang Up: Double-tap the left or right earphone.
• Reject Call: Press and hold the left or right earphone for 1.5 seconds.

Low Latency Mode:

Activate or customize low latency mode through the Baseus app settings or gesture settings.

Factory Reset:

To restore factory settings, turn off your phone's wireless connection, open the charging case, remove both earphones, and tap either earphone three times. The indicators will blink three times. Place earphones back in the case, then remove and reconnect via your phone's wireless settings.

Charging and Indicators

The charging case powers your earphones. During charging, the case's red indicator stays on for 4 seconds before turning off. When fully charged, all indicators are off. When charging the case itself, a white indicator will breathe; it turns solid when fully charged.

App Usage Tips

• The earphone search function is effective for approximately 35 hours. Use this feature to locate misplaced earphones.
• When the search function is active, the earphones will emit an alarm. Use this feature cautiously when not wearing the earphones to prevent hearing damage.

Note: For optimal app performance, ensure the Baseus app is allowed to auto-launch, perform secondary launches, and run in the background via your phone's app settings.

Important Warnings

• Avoid exposing the earphones to extreme temperatures or direct sunlight.
• Do not subject the product to intense physical impact like dropping or squeezing.
• Operate within an ambient temperature range of 0-45°C.
• Baseus is not liable for damages or safety issues arising from improper use or failure to follow manual instructions.
• Do not attempt to disassemble the product.
• Do not use with loads exceeding the product's output current.
• Regularly clean charging contacts with a dry cotton cloth to ensure proper charging.
• Keep the product dry. If water enters, allow it to air dry naturally. Baseus is not responsible for water damage caused by consumer misuse.

Specifications

• Name: Baseus True Wireless Earphones
• Model: Baseus Bowie EZ10
• Material: ABS
• Version: V5.3
• Communication Distance: 10m
• Music Playtime: Approx. 5 hours (at 70% volume)
• Total Playtime (with case): Approx. 22–25 hours
• Battery Capacity: 40mAh (earphones), 300mAh (charging case)
• Charging Interface: Type-C
• Frequency Response: 20Hz-20kHz
• Compatibility: Most wireless devices

Specifications are based on Baseus laboratory tests and may vary with actual usage.

Package Contents

• Charging Case ×1
• Earphones (L&R) ×2
• Ear Tips (L&R) ×4
• Charging Cable ×1
• User Manual ×1
• Warranty Card ×1