Packing List
- 2 x ear-bud
- 1 x charging box
- 1 x USB cable
- 1 x user guide
Product Overview
The product consists of the following components:
- 1. Dust-proof mesh
- 2. Multi-function button
- 3. MIC
- 4. LED indicator
- 5. Charging port
Diagram Description: The diagram shows a charging case and two earbuds. The charging case is depicted with indicator lights and a power button. The earbuds are shown with callouts pointing to the dust-proof mesh, multi-function button, microphone (MIC), LED indicator, and charging port.
Product Specification
| Specification | Details |
|---|---|
| Model Name | TWE-36MK3 |
| Bluetooth version | V5.0 |
| Bluetooth name | TWE-36MK3(L ear-bud), TWE-36MK3(R ear-bud) |
| Stand-by time | Approx. 30 hours |
| Talking/Playing time | Approx. 3 hours |
| Battery capacity | 2 x 45mAh |
| Battery dock capacity | 400mAh |
| Battery temperature | 0°C-40°C (32°F-113°F) |
Power ON/OFF
- To power on, press and hold the multi-function button until the red and blue LED flashes alternatively.
- To power off, press and hold the multi-function button until the LED turns red. The earbuds also turn off automatically if disconnected from your Bluetooth device for over five minutes.
Pairing
Stereo Mode
Connect the two paired earbuds to your smartphone to create stereo sound.
- Press and hold the multi-function buttons of both earbuds simultaneously until the LEDs flash red and blue alternately.
- Wait 3 seconds for the earbuds to pair with each other.
- On your smartphone, enable Bluetooth, search for and select "TWE-36MK3" to pair. After successful pairing, the blue LED flashes slowly.
The earbuds automatically reconnect to your smartphone after being successfully paired.
Mono Mode
Connect either earbud to your smartphone for mono sound.
- Press and hold the multi-function button of the earbud you wish to pair until the LED flashes red and blue alternately.
- On your smartphone, enable Bluetooth, search for and select "TWE-36MK3" to pair.
Note: To change the earbud paired in mono mode, turn off the currently paired earbud and then press and hold the multi-function button of the desired earbud to pair with the smartphone.
Talking Mode
To control phone calls, ensure the earbuds are connected to your smartphone. Incoming call numbers are announced via voice broadcast.
To answer a call, press the multi-function button once. To reject a call, long press the multi-function button.
To redial the last phone number during music playback, press the multi-function button twice.
Charging
Charging the Earbuds
During charging, the red LED turns on. The LED turns off when fully charged.
Note: The earbuds are automatically turned off when charging.
Charging the Charging Box
During charging, the red LED flashes. After fully charged, the red LED shows a solid light.
Trouble Shooting
The following steps can resolve pairing or reconnecting issues:
- If issues persist, re-pair the earbuds with your smartphone. Turn off Bluetooth on your smartphone or turn off the earbuds, then follow the pairing steps described in this manual.
- Ensure the battery dock has sufficient power.
- Place the earbuds into the dock for recharging.
Care and Maintenance
- Charge the earbuds at least once every 6 months.
- Do not store the earbuds in extreme temperatures (below 0°C or above 45°C).
- Do not use chemicals or detergents to clean the earbuds.
- Do not drop or knock the earbuds on hard surfaces.
- Do not scrape the surface with sharp objects.
- Do not attempt to disassemble the product.
Important Notices and Compliance
Notice: All products are subject to change without prior notice. Denver reserves the right to make corrections for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER
The CE marking indicates conformity with European standards.
WEEE Disposal Information: Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to health and the environment if not handled correctly. The [crossed-out trash can symbol] on the product signifies that electric and electronic equipment and batteries should not be disposed of with household waste but separately. As the end user, it is important to submit used batteries to appropriate and designated facilities for recycling, ensuring they are handled in accordance with legislation and do not harm the environment. Collection points are available in cities for free submission of electric and electronic equipment and batteries at recycling stations or from households. Further information is available from your city's technical department.
Hereby, Inter Sales A/S declares that the radio equipment type TWE-36MK3 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.denver-electronics.com. Navigate to the website, click the [Search icon] on the topline, enter the model number "twe-36mk3", find the product page, and the declaration can be found under downloads/other downloads.
Operating Frequency Range: 2412~2472MHz
Max Output Power: 8dbm
Contact Information
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
