IKEA LACK Wall Shelf

Important Information

As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.

Assembly Steps

The following steps outline the assembly process for the LACK wall shelf. Ensure you have the necessary tools and components before starting.

Step 1: Preparation

Gather your tools: a level, a pencil, and a measuring tape. Ensure you have a clear workspace.

Step 2: Marking the Wall

Using a level and pencil, mark the desired height for the shelf on the wall. Measure 22.5 cm (8 7/8 inches) from the edge of the shelf to the mounting point on the wall. Mark two points at this distance, ensuring they are level.

Step 3: Drilling and Mounting

Drill holes at the marked points according to your wall material and the appropriate screws and wall plugs. Insert wall plugs if necessary.

Step 4: Attaching the Shelf

Align the shelf with the drilled holes and secure it using screws. Ensure the shelf is firmly attached to the wall.

Visual Aid Description:

The first diagram shows a person holding a level, a pencil, and a measuring tape, indicating the tools needed for installation. The second diagram depicts a person looking confused at a shelf and then making a phone call, possibly to IKEA customer service for assistance.

The final diagram illustrates the process of marking points on a wall using a level and pencil, with a measurement of 22.5 cm (8 7/8"). It then shows screws being inserted into wall plugs, and the shelf being attached to the wall with screws.

Product Care

Wipe clean with a damp cloth. Wipe dry with a clean cloth.