Bormann Pro BWR7500 Tool Trolley
User Manual v2.1
Parts Description
The Bormann Pro BWR7500 is a robust tool trolley designed for workshop organization. It features a durable plastic moulded worktop with an integrated storage groove. The trolley is equipped with a main handle for easy maneuverability and individual drawer handles. For security, it includes a central locking mechanism for all drawers. The sides feature perforated panels, suitable for hanging accessories. Anti-shock protection is integrated to safeguard the unit and its contents. Mobility is provided by four casters: two fixed casters and two swivel casters, one of which is equipped with a brake. The trolley also includes slots for article identification cards on each drawer for labeling contents.
Technical Data
| Feature | Specification |
|---|---|
| 6x Small Drawers Size | 533x391x58mm |
| 6x Small Drawers Load Capacity | 25Kg |
| 2x Medium Drawers Size | 533x391x128mm |
| 2x Medium Drawers Load Capacity | 35Kg |
| Wheels | Φ125mm, 2x Fixed, 2x Swivel Castors (one with brake) |
| Cabinet Weight | 60Kg |
Notes: The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect performance and safety. Parts described may concern other models with similar features. This equipment is not designed for commercial, trade, or industrial applications; warranty will be voided if used for such purposes. All repair, inspection, and replacement work must be carried out by authorized service technicians.
Safety Warnings
- Always use proper Safety Equipment when using hand tools or power tools. Failure to do so may result in personal injuries or product damage.
- Use adequate manpower to assemble and transport the Trolley. Failure to do so may result in personal injuries or product damage.
- DO NOT stand on the Trolley; a fall could result in serious injury.
- DO NOT transport this Trolley in a truck, utility, or any other vehicle without making sure it is securely attached. Secure Trolley properly when moving with a forklift. Failure to do so may result in personal injuries or product damage.
- DO NOT tow this Trolley with any motor vehicle; the Trolley could tip over, resulting in personal injuries or product damage.
- DO NOT alter this product in any way; doing so may result in personal injuries or product damage.
Usage Warnings
- Never open more than one loaded drawer at a time, otherwise the unit may tip over.
- Do not overload the drawers.
- Apply the brake when stationary. Close all drawers before moving and always push the cabinet, never pull.
- Push Trolleys at speeds that allow you to turn the Trolley at will.
- Do not move the Trolley with items on top.
- Too much weight in front of drawers can cause the unit to tip forward.
Usage Instructions
- DO NOT leave the Trolley on a slanted ground or push down stairs.
- DO NOT use motor vehicles to pull the Trolley.
- DO NOT use the Trolley in extreme humidity or in high acidic environments.
- DO NOT hit the working surface with heavy tools.
- DO NOT exceed the total weight limit of 250Kg.
Load Capacities:
Small Drawers: up to 25Kg
Medium Drawers: up to 35Kg
Large Drawers: up to 35Kg
Operating Instructions
- To pull or push the Trolley, securely hold it and release the castor brake.
- Insert the key into the keyhole and turn the key 180° to lock or unlock the drawers.
- Each drawer has its own locking system on the right side of the Trolley. To open the drawers, push the locking lever beneath the handle to the left.
- To remove the identification strip, use a screwdriver and loosen the screws (note: do not undo screws completely). Remove the stop block and then remove the strip to mark it for identifying tools in the drawer.
- The Trolley is equipped with a castor and brake. Push down on the brake to activate and pull up to deactivate.
Drawer Identification Card Replacement
The process involves opening a drawer, locating a specific point (indicated by a finger placement), gently removing the existing identification card, inserting a new card with updated labels, and then closing the drawer securely.
Casters Replacement
To replace the casters, the cabinet needs to be tilted or inverted to gain access to the mounting bolts. Using a hex key (Allen key), the bolts securing the casters are loosened by turning them counterclockwise. After removing the old or damaged casters, new ones are installed. Finally, the hex key is used to tighten the mounting bolts clockwise, ensuring the new casters are firmly attached and the trolley is stable.
Disposal Information
DISPOSE OF PACKAGING RESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE
