Bormann Pro BBP9920 Battery Charger

Introduction

Read and understand the operating instructions before using the appliance. Familiarize yourself with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. The operator is responsible for accidents or risks to third parties. In case of any doubts about connection and operation, please refer to our customer center.

Safety Instructions

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or with a lack of experience and/or knowledge may only use the machine when supervised or after being instructed on the safe use of the machine and understanding the risks arising from such use.

WARNING! Charging any other battery is not allowed. Single-use batteries must not be charged with the charger. Do not use this product in any stated for normal use. Not observing general in force and instructions from this manual does not make the manufacturer liable for damages.

Emergency Procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury.

Charging Station

Ensure no metal parts enter the shaft to circuit. Never use the charger moist or in wet conditions; it is suitable for indoor areas only.

Make sure the system voltage corresponds to the charger type plate details. There is a risk of electric shock.

Cable connections to be separated by pulling the plug only. Pulling the cable could damage both the cable and plug, as a result, electric safety would no longer be guaranteed.

Never use the charger when the cable, plug or the machine is damaged by external influences. In case of damage, deliver the product to an authorized service center.

Make sure the cooling function is not limited by covering the cooling slots. Do not operate the appliance near heat sources or on a flammable surface.

Never open the charger. Contact a specialized workshop in case of any defect.

The Bormann charger is to be used only to charge the battery. There can be malfunction or fire if different chargers are used. The outer battery surface must be clean and dry before the battery starts to get charged.

Battery

Vapors may leak out in case of unauthorized use or when using a damaged accumulator. Bring fresh air and seek medical advice if experiences difficulties. Vapors may irritate the respiratory system.

WARNING! RISK OF FIRE! RISK OF EXPLOSION!

Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground. Never charge the battery in an environment with acids and easily flammable materials.

Protect the battery against heat and fire. Protect the battery against moisture and liquids. Battery to be used at the ambient temperatures between 10°C and +40°C only. Never put the battery on heaters and do not expose it to strong sunlight for a long time. After being subject to heavy load, let the battery cool down first.

Short circuit - do not bridge the accumulator contacts with metal parts. The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.

Visual Description: Battery Cartridge

The document displays illustrations of battery cartridges. These are typically rectangular or slightly curved power units designed to fit into power tools, featuring connection terminals.

Visual Description: Charging Station

Illustrations show a battery charger, typically a base unit with slots for inserting the battery cartridge. It includes indicator lights to show charging status.

Visual Description: Symbols

• [Warning Symbol] Caution! Warning! Read the operating instructions.
• [Indoor Use Symbol] Charger to be used in closed spaces only.
• [Voltage Symbol] Voltage (V)
• [AC Current Symbol] AC current
• [DC Current Symbol] DC current
• [Heat/Fire Protection Symbol] Protect the battery against heat and fire.
• [Water/Moisture Protection Symbol] Protect the battery against water and moisture.
• [Temperature Protection Symbol] Protect the battery against temperatures above 40°C.
• [Protection Class II Symbol] Protection class II.
• [CE Marking Symbol] CE marking.
• [Application Protection Symbol] Application protection.
• [WEEE Symbol] Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.
• [No Household Waste Symbol] Do not dispose the batteries with household waste.

Work Instructions

Accumulators are supplied partially charged and must therefore be fully charged before being used the first time.

Charge the accumulator when the appliance is running slowly or it stops. A li-ion battery may be charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator. A li-ion battery is protected by the electronic cell protection against deep discharge.

A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced. Original spare batteries to be used only.

Disposal

The disposal instructions are based on the icons placed on the appliance or its package.

Any damaged or disposed devices must be delivered to appropriate collection centres.

Dispose off the batteries in an environmentally friendly manner. Li-ion batteries are subject to the disposal obligation. Have any defective batteries disposed off by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries. Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.

Dispose the batteries when they are no longer functional. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.

Packaging Disposal

The packaging protects the machine against damage during transport. Materials are usually chosen based on environmental principles and waste treatment principles and are recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packagings (e.g. foils, styrofoam) may be dangerous for children.

Risk of suffocation! Keep parts of the packagings out of reach of children and dispose them soon as possible.

Technical Data

Charger Model: BBP2001

Input: 220-240 V / 50 Hz, 65 W

Output: 20 V, 2.4 A

Type: Fast charger

Features: With battery charge status indicator lights.

Note: The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. Parts described/illustrated may concern other models. For safety, reliability, and warranty validity, all repair, inspection, or replacement work must be carried out by authorized service technicians. Always use the product with supplied equipment; non-provided equipment may cause malfunctions or serious injury/death. Manufacturer/importer not liable for injuries/damages from non-conforming equipment.

Additional Information

The instruction manual is also available in digital format on our website: www.nikolaoutools.com. Find it by entering the product code in the Search field.