QFX BT-150
WHERE THE PARTY BEGINS
Control Panel
The control panel features the following buttons and ports:
- 1. M: Mode Selection (BT/USB/TF/FM/AUX)
- 2. PLAY/PAUSE/PHONE LINK: Play/pause audio track. In FM mode, press and hold to begin auto scan. Press to answer the phone.
- 3. PREVIOUS: Select previous audio track or FM station. Press and hold to decrease the volume.
- 4. NEXT: Select next audio track or FM station. Press and hold to increase the volume.
- 5. AUX IN: Connect an external audio device using a 3.5mm TRS audio cable.
- 6. USB PORT: Insert a USB Flash drive to play .mp3 formatted audio.
- 7. TF Card: Insert a TF Card to play .mp3 formatted audio.
- 8. ON/OFF: Toggle the switch to power ON/OFF the unit.
- 9. Power Supply: DC 5V Micro USB port.
Important Safety Information
Electrical Safety
WARNING: To reduce the risk of electric shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to a qualified technician.
Do not expose this equipment to rain or moisture. Do not store or operate near liquids, heat sources like radiators, or heat registers. Clean only with a dry cloth. Users should exercise extra safety when symbols appear in this manual and follow all precautions.
Battery Information
The BT-150 is a lithium battery powered speaker. Ensure the battery is fully charged before first use to maximize its lifespan. Charging takes approximately 2-3 hours. The unit will beep when the battery power is low. A fully charged battery provides about 1-2 hours of playback. The battery can be recharged approximately 300 times. When not in use, set the speaker to "OFF" to prevent battery drain. If the unit is not used for prolonged periods, the battery will gradually lose power. It is recommended to fully charge the battery at least every 60 days.
Connectivity Features
True Wireless Stereo (TWS)
TWS connection is available for two speakers of the same make and model.
To connect via TWS:
- Enable Bluetooth mode on both units by pressing the "M" button.
- Press and hold the "M" button on one unit to sync them together (they must be the same make and model to function).
- On your mobile device, search for "QFX BT-150" in the Bluetooth menu and connect.
- Open your favorite music app and enjoy True Wireless Stereo.
- To exit TWS, press and hold the "M" button.
Bluetooth Pairing
To enable Bluetooth, use the MODE button. Open the Bluetooth settings on your mobile device and search for "QFX BT-150". Select the option to pair both devices. You can then enjoy music from your favorite app. Bluetooth will not need to be reconnected when changing modes.
Explore Other QFX Models
QFX offers a range of audio products. Other models include:
- BT-65
- BT-60
- KAR-927
- E-1500
- LCS-120
Limited Product Warranty
QFX, Inc. warrants the original purchaser that the Product will be free from defects in material or workmanship under normal, non-commercial use for the applicable warranty period. The warranty covers parts and labor, beginning from the original date of purchase.
QFX will, at its option, repair or replace the Product with a new or refurbished unit. This warranty does not cover damage resulting from misuse, abuse, immersion in liquids, improper installation, shipping damage, unauthorized repairs, or acts of God. For full warranty details, troubleshooting, and return procedures, please visit www.qfxusa.com or contact the QFX Customer Support Department at support@qfxusa.com or (800) 864-CLUB (2582).
Note: Some jurisdictions may not allow limitations on implied warranties or consequential damages.