Enlarge Your Ethernet Network: TP-Link TL-FC111PB-20 10/100Mbps WDM Media Converter with 1-Port PoE

LED Explanation

Power (PWR)

• On: Power is on ✔️
• Off: Power is off ❌

Link/Act

• On: Valid link is established ✔️
• Flashing: Transmitting or receiving data ↔️
• Off: Invalid link ❌

Power over Ethernet (PoE)

• On: Supplying power normally ✔️
• Off: Supplying power abnormally or no power supply ❌

Package Contents

• Media Converter
• Power Adapter
• Installation Guide

Connection Scenarios

Scenario 1: Connect Devices with Optical Interfaces

This scenario demonstrates connecting an Ethernet device equipped with optical interfaces to a network using the media converter. The setup involves:

• An "Ethernet Device with Optical Interfaces" connected via a "100BASE-X (Fiber) Interface".
• A "LC-SC Fiber Cable" linking the Ethernet device to the "Media Converter (TL-FC111PB-20)".
• The "Media Converter" has a "Fast Ethernet" RJ45 port.
• A "Twisted-Pair Cable" connects the media converter's RJ45 port to a "Powered Device (PD)" such as an "IP Camera" or "AP".

Note: The maximum output power of the TL-FC111PB-20 is 15.4W. PoE devices requiring more than 15.4W are not supported. The converter supplies steady power and data connectivity to the powered device.

Scenario 2: Connect Devices without Optical Interfaces

This scenario illustrates connecting an Ethernet device that does not have optical interfaces. The setup includes:

• An "Ethernet Device without Optical Interfaces" connected via a "Twisted-Pair Cable" to the "Media Converter".
• The "Media Converter (TL-FC111PB-20)" has a "Fast Ethernet" RJ45 port.
• A "SC-SC Fiber Cable" connects this media converter to a second "Media Converter".
• The second "Media Converter" also has a "Fast Ethernet" RJ45 port.
• Another "Twisted-Pair Cable" connects the second media converter's RJ45 port to a "Powered Device (PD)" such as an "IP Camera" or "AP".

Specifications

General Specifications

Environmental and Physical Specifications

Declarations of Conformity

EU Declaration of Conformity

TP-Link declares that this device complies with essential requirements and other provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration can be found at https://www.tp-link.com/en/ce.

UK Declaration of Conformity

TP-Link declares that this device complies with essential requirements and other provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration can be found at https://www.tp-link.com/support/ukca/.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. Contact TP-Link for service.
• Do not use a damaged charger or USB cable.
• Use only recommended chargers.
• The adapter should be installed near the equipment and be easily accessible.
• Avoid looking directly into the optical port or laser beam during operation, as it can injure eyesight.
• Use only power supplies provided by the manufacturer.
• Contact TP-Link with any questions.

Please read and follow the safety information. Improper use may lead to accidents or damage. Use this product with care and at your own risk.

Support and Community

For questions, answers, and community interaction with TP-Link users and engineers, visit the TP-Link Community at https://community.tp-link.com.

For technical support and other information, visit https://www.tp-link.com/support.

For suggestions or needs regarding product guides, email techwriter@tp-link.com.cn.