Connection Scenarios
Scenario 1: Connecting Devices with and Without Optical Interfaces
This scenario illustrates connecting an Ethernet device equipped with an optical interface to another Ethernet device that lacks an optical interface. The connection involves an optical interface (FX) on one device, a fiber optic cable, a Media Converter, and a UTP (Unshielded Twisted Pair) cable connecting to the TX interface of the other device.
Components involved:
- Ethernet Device with Optical Interface (FX Interface)
- Fiber Optic Cable
- Media Converter
- UTP Cable
- Ethernet Device without Optical Interface (TX Interface)
Scenario 2: Connecting Devices Without Optical Interfaces
This scenario shows connecting two Ethernet devices that do not have optical interfaces. The connection involves a UTP cable connecting to the TX interface of one device, a Media Converter, and another UTP cable connecting to the TX interface of the second device. A fiber optic cable is also shown connecting two Media Converters, with one end linked to an Ethernet device with an optical interface.
Components involved:
- Ethernet Device without Optical Interface (TX Interface)
- UTP Cable
- Media Converter
- Fiber Optic Cable
- Media Converter
- UTP Cable
- Ethernet Device without Optical Interface (TX Interface)
BSMI Notice
Safety Advisory and Precautions
- Use only the original power adapter or one that matches the product's specified power type.
- Unplug the power cord before cleaning. Do not use liquid cleaners, sprays, or damp cloths.
- Protect from moisture; do not spill water or other liquids on the product.
- Slots and openings are for ventilation to ensure reliable operation and prevent overheating; do not block or cover them.
- Do not place the product near heat sources. Do not place it in an enclosed space without adequate ventilation.
- Do not disassemble the casing or attempt self-repair. Contact the manufacturer or distributor for product malfunctions.
- Warning: To avoid electromagnetic interference, this product should not be installed or used in residential environments.
Statement of Hazardous Substance Content
This statement indicates the presence of restricted substances in product components.
| Product Component | Restricted Substance (Chemical Symbol) | Pb | Cd | Hg | Cr+6 | PBB | PBDE |
|---|---|---|---|---|---|---|---|
| PCB | Lead | ○ | ○ | ○ | ○ | ○ | ○ |
| Casing | Cadmium | ○ | ○ | ○ | ○ | ○ | ○ |
| Power Supply | Mercury | ○ | ○ | ○ | ○ | ○ | ○ |
| Hexavalent Chromium | ○ | ○ | ○ | ○ | ○ | ○ | |
| Polybrominated Biphenyls | ○ | ○ | ○ | ○ | ○ | ○ | |
| Polybrominated Diphenyl Ethers | ○ | ○ | ○ | ○ | ○ | ○ |
Note 1: Exceeding 0.1 wt% and 0.01 wt% refers to the percentage content of the restricted substance exceeding the percentage content threshold.
Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage content threshold.
Note 3: "—" indicates that the restricted substance is an exclusion item.
