76 CM E SERIES TRANSITIONAL BUILT-IN SINGLE OVEN
Model: ICBSO3050TE/S/T ⭐
Features
- Wolf's dual convection system provides reliably even heat, reduces hot and cold spots, and enables consistent multi-rack cooking.
- Ten cooking modes, including Bake, Broil, Convection, Convection Roast, Dehydrate, Gourmet, Proof, Roast, Stone, and Warm, were developed by Wolf chefs to maximize the performance of your oven.
- Gourmet Mode offers nearly 50 presets to automatically cook a delicious set of impressive dishes.
- The large full-color touch screen and stainless touch controls are intuitive and easy-to-read.
- The temperature probe alerts you when your dish has reached the desired temperature.
- The oven offers self-clean, delayed start, timed cook, and Sabbath features.
- Coordinates with other Sub-Zero and Wolf appliances.
Accessories
- 30" (762 mm) Broiler Pan
- Bake Stone Kit
- Baking Sheet
- Dehydration Rack Set
- Full-Extension Ball-Bearing Rack
- Multifunction Pan
- Standard Oven Rack
- Temperature Probe
Accessories are available through an authorized dealer.
Product Specifications
Model | ICBSO3050TE/S/T |
---|---|
Dimensions (Overall) | 759mm W x 723mm H x 584mm D |
Oven Interior Dimensions | 635mm W x 419mm H x 483mm D |
Overall Capacity | 131 L |
Usable Capacity | 113 L |
Door Clearance | 543mm |
Weight | 124 kg |
Electrical Supply | 220-240 VAC; 50/60 Hz |
Electrical Service | 3.8-4.8 kW |
Dimensions and Installation
Note: Dimensions in parentheses are in millimeters unless otherwise specified.
Overall Dimensions Diagram Description
The overall external dimensions of the oven are 759mm (width) by 723mm (height) by 584mm (depth). The diagram indicates a conduit channel and the space required when the oven door is opened.
Oven Interior Dimensions Diagram Description
The interior cavity of the oven measures 635mm (width) by 419mm (height) by 483mm (depth).
Electrical Diagram Description
The electrical connection point, labeled 'E', is shown. The diagram notes that the electrical supply may be located in an adjacent cabinet, and this placement might require additional cabinet depth.
Flush Installation Diagrams Description
These diagrams provide critical information for flush installation:
- Side View: Details the required cabinet opening height (e.g., 730mm / 28 3/4 inches) and depth, including specific clearances for the oven body and electrical supply. It also highlights shaded areas that will be visible and should be finished to match cabinetry.
- Top View: Shows the required cabinet opening width (e.g., 765mm / 30 1/8 inches) and depth, specifying reveals and clearances for the oven installation.
- Front View: Illustrates how the oven is designed to fit flush with the cabinetry, showing overall front opening dimensions.
Note: Location of the electrical supply within the opening may require additional cabinet depth.
Important Information and Contact
Disclaimer: These specifications are a guide only and are not suitable for cabinetry, installation, or services location.
Sub-Zero and Wolf offer a Customised Design Check Service to ensure your new appliances are installed perfectly. For further information regarding this service, detailed product specifications, and installation advice, please contact:
- Phone: 1300 808 859
- Email: enquiries@subzero.com
- Website: www.subzero-wolf.com.au
Sub-Zero and Wolf Design Guides are also available via their website.
Specifications are subject to change without notice. This information was generated on July 25, 2022. Verify specifications prior to finalizing your cabinetry/enclosures.