Dimensions and Installation
Note: Dimensions in parenthesis are in millimeters unless otherwise specified.
Overall Unit Dimensions
The oven unit measures 759mm in width, 708mm in height, and 603mm in depth.
Oven Interior Dimensions
The interior of the oven measures 635mm in width, 419mm in height, and 483mm in depth.
Electrical Information
The electrical supply is 220-240 VAC, 50/60 Hz, requiring 4.4 kW. The electrical supply may be located in an adjacent cabinet, and placement within the opening might require additional cabinet depth.
Flush Installation Details
For a flush installation, specific dimensions and clearances are required:
Side View Considerations
The oven cavity depth is 25 inches (635mm). Flush inset installation requires specific clearances behind the frame. A conduit channel is present.
Top View Considerations
The diagram indicates the overall width of the unit and the required cabinet opening. Minimum reveals are specified for flush installation, and the location for electrical connections is shown.
Front View Considerations
The front view shows the appliance with finished cleats. The overall width is 759mm (29 7/8 inches), and the depth behind the frame is 23 3/4 inches (603mm).
Important Information
GUIDE ONLY. THESE SPECIFICATIONS ARE A GUIDE ONLY. Not suitable for cabinetry, installation, or services location.
SUB-ZERO AND WOLF OFFER A CUSTOMISED DESIGN CHECK SERVICE to ensure your new appliances are installed perfectly. Please contact their Customer Care team for further information regarding the Design Check Service, or for detailed product specification and installation advice.
Contact:
Sub-Zero and Wolf Design Guides are also available via their website: www.subzero-wolf.com.au.
Specifications are subject to change without notice. This information was generated on March 14, 2018. Verify specifications prior to finalizing your cabinetry/enclosures.