Murdock A172-UG-VR-D1-BF Series: Barrier-Free Drinking Fountain and Bottle Filler

Standard Features

Drinking Fountain

• Rough-ins match other manufacturers for easy replacement.
• EZ Door® Filter with a 30-second filter replacement option.
• Child or Adult ADA Compliant (when properly installed).
• Universal Bi-Level design allows for flexible installation (left unit high, right unit low, or vice versa) without additional parts.
• Satin finish on apron and one-piece bottom wrapper.
• 304 Stainless Steel basin with flush-mounted chrome-plated brass button.
• Polished stainless steel, anti-rotation, non-squirt bubblers.
• Auto-Stop feature allows cartridge and strainer service without removing the drinking fountain deck to access the water supply stop.
• Lead-Free construction.

Bottle Filler

• Hands-free sensor or pushbutton operated.
• ADA Reach Compliant.
• 100-mesh inlet strainer.
• 1 GPM laminar flow.
• 115V plug-in transformer included with -BF2S models.

Suggested Specifications

Drinking Fountain

Model A172400S-UG-VR-D1 is a self-contained bi-level drinking fountain. Units are activated by vandal-resistant chrome-plated brass front pushbuttons requiring less than 5 pounds of force. The lead-free stainless steel bubbler delivers 0.5 GPM flow, features an integrally designed non-squirt feature, and operates on a water pressure range of 20-105 PSIG. Basins are constructed from 304 stainless steel and include an integral drain. The cabinet is stainless steel with a satin finish. The unit is certified to ANSI A117.1, Public Law 111-380 (No-Lead), CHSC 116875, and NSF/ANSI 61, Section 9. The fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately.

Bottle Filler BF1S

The BF1S is a pushbutton-operated bottle filler with a heavy-gauge stainless steel housing in a satin finish. It is activated using a pneumatically operated hemispherical pushbutton requiring less than 5 pounds of force. The bottle filler provides approximately 1 GPM flow rate with a laminar flow spout to minimize splashing.

Bottle Filler BF2S

The BF2S is a 9-volt sensor-operated bottle filler with a heavy-gauge stainless steel housing in a satin finish. The optional -BCD (Bottle Counter Display) indicates the quantity of 16 oz. disposable plastic bottles saved from a landfill and displays the water filter status. The bottle filler provides approximately 1 GPM flow rate with a laminar flow spout to minimize splashing.

Compliance Standards

Model Configuration

Note: "RATED FOR INDOOR OR OUTDOOR USE" (Must Specify)

Bubbler Type:

• A172400S-UG-VR-D1: Satin Stainless Finish (Standard)
• A172400F-UG-VR-D1: Satin Stainless Finish (Flexible Bubbler)

Bottle Filler Selection:

• BF1S: Bottle Filler with Pushbutton Operation
• BF2S: Bottle Filler with Sensor Operation
• BF2S-BAT: Bottle Filler with Battery Operated Sensor Operation
• BF2S-BCD: Bottle Filler with Sensor Operation with Bottle Counter Display

Options:

• -LOGO: Customer Specified Logo / Graphics (Additional costs may apply.)

Accessories:

• -WF1EZ: 1500-Gallon Capacity Easy Door® Filter™ 30-Second Replacement (Patent Pending) (Additional costs may apply.)
• -WF3: 3000-Gallon Capacity Water Filter™ (Additional costs may apply.)
• -SK5: Cane Detection Skirt for Upper Unit™. Skirt finish provided to match Model selected above (P.N. A000G000-SK5 Gray, A0004000-SK5 Satin Stainless) (Additional costs may apply.)

Notes

• Refer to Supplemental Submittal Sheet for details.
• Units installed with exposure to extreme hot or cold temperatures require adequate protection. Units are not freeze resistant. Refer to Installation Instructions for complete details.
• Product Warranty information available.
• Accessibility Compliance is subject to local Code Enforcement Authority.
• WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Compatible Mounting Support Carrier

Jay R. Smith Mfg. Co. Figure # 0834-4P (https://www.JRSmith.com)

Dimensional Information

All dimensions are in inches [MM]. Allow 4 inches [102MM] minimum clearance per side for ventilation.

Dimensions shown are for ADA adult height. Adjust vertical dimensions as necessary to comply with federal, state & local codes.

Stop valve, P-trap & electrical outlet not supplied.

IMPORTANT: Coolers must be attached to wall with appropriate anchor screws.

• A. 3/8" O.D. Supply Inlet
• B. Waste Outlet for P-trap by others for provided 1-1/4" O.D. tailpiece
• C. Electrical Service Rough
• D. Ø3/8" Hanger Bracket Punching, 6 places on each fixture for anchoring hardware by others
• E. Ø1/4" Punching, 2 places on each fixture for anchoring hardware, by others
• F. Bottle Filler Pushbutton
• G. Vandal Resistant Pushbutton Cartridge

IMPORTANT: Dimensions are shown for reference only. Refer to product Installation Manual for complete details prior to Rough-in.

Manufacturer Information:

MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA

Phone: 800-453-7465 or 626-333-2543 • www.murdockmfg.com

Member of Morris Group International®

Revised: 01/17/2024

Selection Summary & Approval for Manufacturing

Complete the following fields for order and manufacturing approval:

All dimensions are subject to manufacturer's tolerance of plus or minus 1/4" nominal and subject to change without notice. Murdock® assumes no responsibility for use of void or superseded data. Dimensions may change with the addition of optional accessories.