Murdock GV Series GVC59

Product Overview

The Murdock GV Series GVC59 is a barrier-free, wall-mounted drinking fountain designed for contemporary public spaces. It offers durability and accessibility.

Visual Description: The fountain features a robust brown concrete aggregate arm that supports a polished stainless steel bowl. A vandal-resistant, anti-rotation bubbler is centrally located within the bowl, designed for non-squirt operation.

Standard Features

• Both Child and Adult Compliant (when properly installed)
• Resistant to sunlight, heat, moisture, and wear
• 18-gage, 304 stainless steel bowl
• Reinforced concrete with aggregate finish
• Polished stainless steel, anti-rotation, non-squirt bubbler
• 100 mesh inlet strainer
• P-trap, 1-1/4" O.D.
• Vandal resistant galvanized steel bottom plate and screws

Suggested Specifications

Model GVC59 is a wall-mounted, vandal-resistant drinking fountain. It features an 18-gage, 304 stainless steel bowl integrated into a brown concrete aggregate arm. Activation is via a front-mounted self-closing button requiring less than 5 pounds of force. An internally mounted valve with an adjustable stream regulator controls water flow. The bubbler is polished stainless steel with a non-squirt feature and operates on a water pressure range of 20-105 psig.

The unit complies with ANSI A117.1 and is certified to Public Law 111-380 (NO-LEAD) and NSF/ANSI/CAN 61. The fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately.

Installation Notes

Refer to installation details to ensure the fixture's mounting channel is compatible with the wall construction type.

Model Options

Model Selection (Must Specify):

• GVC58: Tan Concrete Aggregate
• GVC59: Brown Concrete Aggregate (Shown)

Options (additional costs may be incurred)

• -FRA1: Freeze resistant valve

Accessories

(additional costs may be incurred)

• -A0000000-MP1: Mounting Plate

Compliance and Warnings

Complies with the following standards:

• Federal Public Law 111-380 [Lead-Free Compliance]
• NSF/ANSI/CAN 61 [NSF/ANSI/CAN 61 Certified]
• [Recyclable Product]
• [Water Conserving Product]

[Health Warning]: Cancer and Reproductive Harm - Visit www.P65Warnings.ca.gov

Technical Drawing and Dimensions

The technical drawing provides key dimensions for the GVC59 fountain. Overall dimensions include a 10" (254mm) width for the bowl, 4" (102mm) height for the bubbler area, and 18" (457mm) overall depth. The unit has a 13" (330mm) width for mounting. The supply inlet is 3/8" NPT, with a 1-1/4" (32mm) OD P-trap provided. Valve specifications indicate a minimum/maximum pressure range of 30 to 100 psi.

General notes state that all dimensions are in inches [mm] and are shown for recommended adult height. Vertical dimensions should be adjusted as necessary to comply with federal, state, and local codes. A stop valve is not provided. Refer to installation notes on page 1.

[ADA Compliant Symbol] indicates compliance with ADA requirements when mounted appropriately.