Product Overview
The POPP Smart Thermostat is a connected radiator thermostat designed for residential use. It is battery-powered, compact, and easy to operate, featuring a manual hand wheel and a single button. As a Zigbee Certified Product, it is compatible with the POPP ZB-Stick, ZB-Shield, and other third-party certified systems utilizing Zigbee technology. Installation is designed to be quick, taking approximately 30 seconds.
Key Features
- Programming and control via a Zigbee gateway
- Energy savings
- Easy to install
- Easy to operate
- Manual mode
- Open-window function
- PID Accurate temperature control
- Adaptive learning
- Easy to read LCD display
- Display rotation -180 degrees
- Adjustable Min./max. temperature range
- Child lock function
- Frost protection function
- Valve exercise function
- Backlit display
- Battery life time up to 2 years
- Visual warning of low battery
Installation Guide
Follow these steps to install and connect your POPP Smart Thermostat.
Step 1: Valve Identification and Adapter Mounting
Identify your existing radiator valve by comparing its body shape to the diagrams provided. Select and mount the correct adapter. The following adapter types are illustrated:
RA Valve
[Diagram showing RA valve body shape and corresponding adapter]RAV Valve
[Diagram showing RAV valve body shape and corresponding adapter with [click] indicator]RAVL Valve
[Diagram showing RAVL valve body shape and corresponding adapter with [click] indicator]M30 Valve
[Diagram showing M30 valve body shape and corresponding adapter, 30mm thread]RTD Valve
[Diagram showing RTD valve body shape and corresponding adapter, 28mm thread]M28 Valve
[Diagram showing M28 valve body shape and corresponding adapter]CALEFFI Valve
[Diagram showing CALEFFI valve body shape and corresponding adapter with [click] indicator]GIACOMINI Valve
[Diagram showing GIACOMINI valve body shape and corresponding adapter with [click] indicator]The following adapters are included in the scope of delivery: RA, RAV, M30, RAVL. Other adapters shown in the overview can be purchased separately. Adapter code numbers are provided below each illustration in the original documentation.
Step 2: Battery Insertion and Thermostat Mounting
Insert the batteries into the POPP Smart Thermostat. Then, mount the thermostat onto the adapter by turning it until you hear a click. The thermostat will enter Mounting mode, indicated by an "M" on its display.
[Diagram showing batteries with [plus] and [minus] terminals being inserted into the thermostat body, with an arrow indicating direction.][Diagram showing the thermostat being attached to the mounted adapter, with [click] indicators and arrows suggesting rotation.]Step 3: Prepare Zigbee Gateway
Open your Zigbee-enabled gateway's app or user interface. Consult your gateway's user manual for instructions on how to start the Zigbee connecting mode within your app or interface.
Step 4: Initiate Zigbee Connection
Start the Zigbee connecting mode in your gateway's app or user interface.
Step 5: Activate Thermostat Pairing
Press the button on the POPP Smart Thermostat once. The connecting symbol on the thermostat's screen will begin to flash, indicating it is ready to pair.
[Diagram showing a finger pressing the button on the thermostat, with '1x' indicating a [single press].][Diagram showing the thermostat display with a flashing connection symbol.]Step 6: Confirm Device Discovery
The POPP Smart Thermostat will appear in your gateway's app or user interface, confirming successful discovery.
Step 7: Finalize Installation
Press and hold the button on the POPP Smart Thermostat for 3 seconds. This will end the mounting mode, and the thermostat will display the set temperature, completing the installation.
[Diagram showing a hand pressing the button for [three seconds].][Diagram showing the thermostat mounted correctly, displaying a temperature, with a ✔️ [checkmark] indicating successful installation.]
Troubleshooting
The POPP Smart Thermostat will not connect to your gateway
- Remove one battery from the thermostat.
- Hold down the button on the POPP Smart Thermostat while re-inserting the battery. The display will start flashing. Release the button when the display stops flashing. This action resets the POPP Smart Thermostat to factory default.
- The POPP Smart Thermostat will enter mounting mode, indicated by an "M" on its screen. Repeat the installation process from Step 1 with your Zigbee Gateway.
