August EP410 Bone Conduction Bluetooth Headphones

Introduction

Thank you for purchasing the August EP410 Bone Conduction Bluetooth Headphones. This user manual is designed to familiarize you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product.

Safety

To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble the EP410, it can be unsafe and will invalidate the manufacturer's warranty.

Storage and Use

• Do not store or use this device in extreme temperatures.
• Do not immerse the device in more than 50cm of water.
• Do not expose this device to dust, oil or smoke.
• Do not drop or strike this device.
• When transporting this device, store securely to avoid impact damage.
• Do not scratch this device with sharp objects.

Maintenance

Please unplug all leads before cleaning this device.

• Wipe the device and buttons with a soft cloth.
• Never wipe this device with an abrasive cloth or apply detergent, alcohol or chemical-based cleaning products.

Disposal

Please ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environment agency and any other relevant authorities for current disposal regulations.

Declaration of Conformity

The Declaration of Conformity can be found on our website at http://augustint.com/en/declaration/

Customer Service

You can contact August International Ltd by phone on: +44(0)845 250 0586 (Carrier Rates Apply) or by email at: service@augustint.com should you require further technical support or customer service.

Main Features

• Premium Sound Quality with Bass
• Ultra Lightweight Open-Ear Design
• Bluetooth 5.3 and Hands-free Calling
• Up to 15 Metres Connection Range
• USB-C Charging for Up to 7 Hours Battery Life

Box Contents

The box contains:

• EP410 Headphones
• Power Cable
• Quick Start Guide
• Safety and Warranty Information

Part Names and Functions

The August EP410 has the following parts:

• ① USB-C Charging Port
• ② LED Indicator
• ③ Multi-function Button
• ④ Microphone

Operation

Charging

Please fully charge the EP410 before first use or if left unused for a long period of time. Use the provided USB-C charging cable. Open the rubber socket protector and plug the charging cable into the charging socket. The LED is constantly on red while charging. When the headphones are fully charged, the LED indicator will turn off. Note: Please DO NOT use the headphones while charging.

Power On/Off

• Power On: Press and hold the Power button for 3 seconds. The LED light flashes 3 times in blue.
• Power Off: Press and hold the Power button for 5 seconds. The LED light flashes 3 times in red.

Bluetooth Connection

For the first time use, the headset will enter Bluetooth pairing status after being powered on properly, and the LED indicator will flash red and blue. To pair the headset, select the EP410 in your mobile device's Bluetooth settings and click to connect. The LED indicator will flash blue after Bluetooth is connected and will turn off. To connect a new mobile device, disconnect the EP410 or disable Bluetooth in the current device's settings, then select the EP410 on the new device.

Multipoint

The EP410 supports Bluetooth multipoint function, allowing automatic switching between two mobile devices after successful pairing.

• To connect dual devices at the same time: Please select EP410 in the system settings on one mobile device to connect, then disable the Bluetooth function on that mobile device. Once disconnected, select EP410 in the system settings of another mobile device to connect.
• Restart the EP410 and ensure the Bluetooth function is enabled on both paired mobile devices; the EP410 will automatically connect to both devices.

Button Operations and Functions

Specification

Warranty

This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable.

This warranty is subject to the following conditions:

• The warranty is only valid within the country where the product is purchased.
• The product must be correctly installed and operated in accordance with the instructions given in this user manual.
• The product must be used solely for domestic purposes.
• The warranty only covers the main unit, and does not cover the accessories.
• The warranty does not cover damage caused by misuse, negligence, accident, and natural disaster.
• The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. August International Ltd disclaims any liability for incidental or consequential damages.
• Please consult August International Ltd's customer advisor before returning any product; we are not responsible for any unexpected product returns.
• Any faulty product must be kept and returned in the original packaging with all the accessories and the original copy of the purchase receipt.

The warranty is in addition to, and does not diminish, your statutory or legal rights.

Compliance Information

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of Conformity may be consulted online at http://www.augustint.com/en/declaration/

Industry Canada Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept interference, including interference that may cause undesired operation of the device.

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

No Unauthorized Modifications

Do not make any changes or modifications to this product without the prior express written approval of August International Ltd. Any changes or modifications made without express written approval could void the user's authority to operate this product.

For details of further relevant technical standards, please contact August International Ltd at the address above.